From 95a2572f95d5f78ef9fe28c200b21ad2b4b1e0c0 Mon Sep 17 00:00:00 2001 From: Dirk Hohndel Date: Wed, 21 Oct 2009 01:05:43 -0700 Subject: [PATCH] Staging: comedi: gsc_hpdi: Fix style issues Style cleanup in staging based on Greg's tutorial / checkpatch Fix 80 char line length (where useful) - includes two changes to code to make it more logical / readable Remove {} around single line blocks Signed-off-by: Dirk Hohndel Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/gsc_hpdi.c | 100 +++++++++++----------- 1 file changed, 49 insertions(+), 51 deletions(-) diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c index 396fa89a5a6e..346d4c7c0d11 100644 --- a/drivers/staging/comedi/drivers/gsc_hpdi.c +++ b/drivers/staging/comedi/drivers/gsc_hpdi.c @@ -143,7 +143,8 @@ enum board_control_bits { RX_FIFO_RESET_BIT = 0x4, TX_ENABLE_BIT = 0x10, RX_ENABLE_BIT = 0x20, - DEMAND_DMA_DIRECTION_TX_BIT = 0x40, /* for channel 0, channel 1 can only transmit (when present) */ + DEMAND_DMA_DIRECTION_TX_BIT = 0x40, + /* for ch 0, ch 1 can only transmit (when present) */ LINE_VALID_ON_STATUS_VALID_BIT = 0x80, START_TX_BIT = 0x10, CABLE_THROTTLE_ENABLE_BIT = 0x20, @@ -421,9 +422,11 @@ static void init_plx9080(struct comedi_device *dev) bits |= PLX_DMA_EN_READYIN_BIT; /* enable dma chaining */ bits |= PLX_EN_CHAIN_BIT; - /* enable interrupt on dma done (probably don't need this, since chain never finishes) */ + /* enable interrupt on dma done + * (probably don't need this, since chain never finishes) */ bits |= PLX_EN_DMA_DONE_INTR_BIT; - /* don't increment local address during transfers (we are transferring from a fixed fifo register) */ + /* don't increment local address during transfers + * (we are transferring from a fixed fifo register) */ bits |= PLX_LOCAL_ADDR_CONST_BIT; /* route dma interrupt to pci bus */ bits |= PLX_DMA_INTR_PCI_BIT; @@ -680,38 +683,35 @@ static int hpdi_detach(struct comedi_device *dev) if (dev->irq) free_irq(dev->irq, dev); - if (priv(dev)) { - if (priv(dev)->hw_dev) { - if (priv(dev)->plx9080_iobase) { - disable_plx_interrupts(dev); - iounmap((void *)priv(dev)->plx9080_iobase); - } - if (priv(dev)->hpdi_iobase) - iounmap((void *)priv(dev)->hpdi_iobase); - /* free pci dma buffers */ - for (i = 0; i < NUM_DMA_BUFFERS; i++) { - if (priv(dev)->dio_buffer[i]) - pci_free_consistent(priv(dev)->hw_dev, - DMA_BUFFER_SIZE, - priv(dev)-> - dio_buffer[i], - priv - (dev)->dio_buffer_phys_addr - [i]); - } - /* free dma descriptors */ - if (priv(dev)->dma_desc) + if ((priv(dev)) && (priv(dev)->hw_dev)) { + if (priv(dev)->plx9080_iobase) { + disable_plx_interrupts(dev); + iounmap((void *)priv(dev)->plx9080_iobase); + } + if (priv(dev)->hpdi_iobase) + iounmap((void *)priv(dev)->hpdi_iobase); + /* free pci dma buffers */ + for (i = 0; i < NUM_DMA_BUFFERS; i++) { + if (priv(dev)->dio_buffer[i]) pci_free_consistent(priv(dev)->hw_dev, - sizeof(struct plx_dma_desc) - * NUM_DMA_DESCRIPTORS, - priv(dev)->dma_desc, + DMA_BUFFER_SIZE, priv(dev)-> - dma_desc_phys_addr); - if (priv(dev)->hpdi_phys_iobase) { - comedi_pci_disable(priv(dev)->hw_dev); - } - pci_dev_put(priv(dev)->hw_dev); + dio_buffer[i], + priv + (dev)->dio_buffer_phys_addr + [i]); } + /* free dma descriptors */ + if (priv(dev)->dma_desc) + pci_free_consistent(priv(dev)->hw_dev, + sizeof(struct plx_dma_desc) + * NUM_DMA_DESCRIPTORS, + priv(dev)->dma_desc, + priv(dev)-> + dma_desc_phys_addr); + if (priv(dev)->hpdi_phys_iobase) + comedi_pci_disable(priv(dev)->hw_dev); + pci_dev_put(priv(dev)->hw_dev); } return 0; } @@ -814,15 +814,16 @@ static int di_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s, if (err) return 4; - if (cmd->chanlist) { - for (i = 1; i < cmd->chanlist_len; i++) { - if (CR_CHAN(cmd->chanlist[i]) != i) { - /* XXX could support 8 channels or 16 channels */ - comedi_error(dev, - "chanlist must be channels 0 to 31 in order"); - err++; - break; - } + if (!cmd->chanlist) + return 0; + + for (i = 1; i < cmd->chanlist_len; i++) { + if (CR_CHAN(cmd->chanlist[i]) != i) { + /* XXX could support 8 or 16 channels */ + comedi_error(dev, + "chanlist must be ch 0 to 31 in order"); + err++; + break; } } @@ -835,9 +836,9 @@ static int di_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s, static int hpdi_cmd_test(struct comedi_device *dev, struct comedi_subdevice *s, struct comedi_cmd *cmd) { - if (priv(dev)->dio_config_output) { + if (priv(dev)->dio_config_output) return -EINVAL; - } else + else return di_cmd_test(dev, s, cmd); } @@ -903,9 +904,9 @@ static int di_cmd(struct comedi_device *dev, struct comedi_subdevice *s) static int hpdi_cmd(struct comedi_device *dev, struct comedi_subdevice *s) { - if (priv(dev)->dio_config_output) { + if (priv(dev)->dio_config_output) return -EINVAL; - } else + else return di_cmd(dev, s); } @@ -967,14 +968,12 @@ static irqreturn_t handle_interrupt(int irq, void *d) uint8_t dma0_status, dma1_status; unsigned long flags; - if (!dev->attached) { + if (!dev->attached) return IRQ_NONE; - } plx_status = readl(priv(dev)->plx9080_iobase + PLX_INTRCS_REG); - if ((plx_status & (ICS_DMA0_A | ICS_DMA1_A | ICS_LIA)) == 0) { + if ((plx_status & (ICS_DMA0_A | ICS_DMA1_A | ICS_LIA)) == 0) return IRQ_NONE; - } hpdi_intr_status = readl(priv(dev)->hpdi_iobase + INTERRUPT_STATUS_REG); hpdi_board_status = readl(priv(dev)->hpdi_iobase + BOARD_STATUS_REG); @@ -994,9 +993,8 @@ static irqreturn_t handle_interrupt(int irq, void *d) priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG); DEBUG_PRINT("dma0 status 0x%x\n", dma0_status); - if (dma0_status & PLX_DMA_EN_BIT) { + if (dma0_status & PLX_DMA_EN_BIT) drain_dma_buffers(dev, 0); - } DEBUG_PRINT(" cleared dma ch0 interrupt\n"); } spin_unlock_irqrestore(&dev->spinlock, flags); -- 2.20.1