From 954b2b5ac76d6bde80974c0779d36f054e036aa5 Mon Sep 17 00:00:00 2001 From: Raghava Aditya Renukunta Date: Thu, 2 Feb 2017 15:53:31 -0800 Subject: [PATCH] scsi: aacraid: Added support to abort cmd and reset lun Added task management command support to abort any timed out commands in case of a eh_abort call and to reset lun's in case of eh_reset call. Signed-off-by: Raghava Aditya Renukunta Signed-off-by: Dave Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen --- drivers/scsi/aacraid/aacraid.h | 48 +++++ drivers/scsi/aacraid/linit.c | 353 +++++++++++++++++++++++++-------- drivers/scsi/aacraid/src.c | 33 ++- 3 files changed, 346 insertions(+), 88 deletions(-) diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 2f584b402c6b..055ab19ab9fc 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -206,6 +206,53 @@ struct aac_hba_cmd_req { */ }; +/* Task Management Functions (TMF) */ +#define HBA_TMF_ABORT_TASK 0x01 +#define HBA_TMF_LUN_RESET 0x08 + +struct aac_hba_tm_req { + u8 iu_type; /* HBA information unit type */ + u8 reply_qid; /* Host reply queue to post response to */ + u8 tmf; /* Task management function */ + u8 reserved1; + + __le32 it_nexus; /* Device handle for the command */ + + u8 lun[8]; /* SCSI LUN */ + + /* Used to hold sender context. */ + __le32 request_id; /* Sender context */ + __le32 reserved2; + + /* Request identifier of managed task */ + __le32 managed_request_id; /* Sender context being managed */ + __le32 reserved3; + + /* Lower 32-bits of reserved error data target location on the host */ + __le32 error_ptr_lo; + /* Upper 32-bits of reserved error data target location on the host */ + __le32 error_ptr_hi; + /* Length of reserved error data area on the host in bytes */ + __le32 error_length; +}; + +struct aac_hba_reset_req { + u8 iu_type; /* HBA information unit type */ + /* 0 - reset specified device, 1 - reset all devices */ + u8 reset_type; + u8 reply_qid; /* Host reply queue to post response to */ + u8 reserved1; + + __le32 it_nexus; /* Device handle for the command */ + __le32 request_id; /* Sender context */ + /* Lower 32-bits of reserved error data target location on the host */ + __le32 error_ptr_lo; + /* Upper 32-bits of reserved error data target location on the host */ + __le32 error_ptr_hi; + /* Length of reserved error data area on the host in bytes */ + __le32 error_length; +}; + struct aac_hba_resp { u8 iu_type; /* HBA information unit type */ u8 reserved1[3]; @@ -223,6 +270,7 @@ struct aac_hba_resp { struct aac_native_hba { union { struct aac_hba_cmd_req cmd; + struct aac_hba_tm_req tmr; u8 cmd_bytes[AAC_MAX_NATIVE_SIZE-FW_ERROR_BUFFER_SIZE]; } cmd; union { diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index 68a5d2d1e655..c09b71c7dd8e 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -574,46 +574,136 @@ static int aac_eh_abort(struct scsi_cmnd* cmd) struct scsi_device * dev = cmd->device; struct Scsi_Host * host = dev->host; struct aac_dev * aac = (struct aac_dev *)host->hostdata; - int count; + int count, found; + u32 bus, cid; int ret = FAILED; - printk(KERN_ERR "%s: Host adapter abort request (%d,%d,%d,%llu)\n", - AAC_DRIVERNAME, - host->host_no, sdev_channel(dev), sdev_id(dev), dev->lun); - switch (cmd->cmnd[0]) { - case SERVICE_ACTION_IN_16: - if (!(aac->raw_io_interface) || - !(aac->raw_io_64) || - ((cmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) - break; - case INQUIRY: - case READ_CAPACITY: - /* Mark associated FIB to not complete, eh handler does this */ + bus = aac_logical_to_phys(scmd_channel(cmd)); + cid = scmd_id(cmd); + if (aac->hba_map[bus][cid].devtype == AAC_DEVTYPE_NATIVE_RAW) { + struct fib *fib; + struct aac_hba_tm_req *tmf; + int status; + u64 address; + __le32 managed_request_id; + + pr_err("%s: Host adapter abort request (%d,%d,%d,%d)\n", + AAC_DRIVERNAME, + host->host_no, sdev_channel(dev), sdev_id(dev), (int)dev->lun); + + found = 0; for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { - struct fib * fib = &aac->fibs[count]; - if (fib->hw_fib_va->header.XferState && - (fib->flags & FIB_CONTEXT_FLAG) && - (fib->callback_data == cmd)) { - fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; - cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; + fib = &aac->fibs[count]; + if (*(u8 *)fib->hw_fib_va != 0 && + (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA) && + (fib->callback_data == cmd)) { + found = 1; + managed_request_id = ((struct aac_hba_cmd_req *) + fib->hw_fib_va)->request_id; + break; + } + } + if (!found) + return ret; + + /* start a HBA_TMF_ABORT_TASK TMF request */ + fib = aac_fib_alloc(aac); + if (!fib) + return ret; + + tmf = (struct aac_hba_tm_req *)fib->hw_fib_va; + memset(tmf, 0, sizeof(*tmf)); + tmf->tmf = HBA_TMF_ABORT_TASK; + tmf->it_nexus = aac->hba_map[bus][cid].rmw_nexus; + tmf->lun[1] = cmd->device->lun; + + address = (u64)fib->hw_error_pa; + tmf->error_ptr_hi = cpu_to_le32((u32)(address >> 32)); + tmf->error_ptr_lo = cpu_to_le32((u32)(address & 0xffffffff)); + tmf->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE); + + fib->hbacmd_size = sizeof(*tmf); + cmd->SCp.sent_command = 0; + + status = aac_hba_send(HBA_IU_TYPE_SCSI_TM_REQ, fib, + (fib_callback) aac_hba_callback, + (void *) cmd); + + /* Wait up to 2 minutes for completion */ + for (count = 0; count < 120; ++count) { + if (cmd->SCp.sent_command) { ret = SUCCESS; + break; } + msleep(1000); } - break; - case TEST_UNIT_READY: - /* Mark associated FIB to not complete, eh handler does this */ - for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { - struct scsi_cmnd * command; - struct fib * fib = &aac->fibs[count]; - if ((fib->hw_fib_va->header.XferState & cpu_to_le32(Async | NoResponseExpected)) && - (fib->flags & FIB_CONTEXT_FLAG) && - ((command = fib->callback_data)) && - (command->device == cmd->device)) { - fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; - command->SCp.phase = AAC_OWNER_ERROR_HANDLER; - if (command == cmd) + + if (ret != SUCCESS) + pr_err("%s: Host adapter abort request timed out\n", + AAC_DRIVERNAME); + } else { + pr_err( + "%s: Host adapter abort request.\n" + "%s: Outstanding commands on (%d,%d,%d,%d):\n", + AAC_DRIVERNAME, AAC_DRIVERNAME, + host->host_no, sdev_channel(dev), sdev_id(dev), + (int)dev->lun); + switch (cmd->cmnd[0]) { + case SERVICE_ACTION_IN_16: + if (!(aac->raw_io_interface) || + !(aac->raw_io_64) || + ((cmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) + break; + case INQUIRY: + case READ_CAPACITY: + /* + * Mark associated FIB to not complete, + * eh handler does this + */ + for (count = 0; + count < (host->can_queue + AAC_NUM_MGT_FIB); + ++count) { + struct fib *fib = &aac->fibs[count]; + + if (fib->hw_fib_va->header.XferState && + (fib->flags & FIB_CONTEXT_FLAG) && + (fib->callback_data == cmd)) { + fib->flags |= + FIB_CONTEXT_FLAG_TIMED_OUT; + cmd->SCp.phase = + AAC_OWNER_ERROR_HANDLER; ret = SUCCESS; + } } + break; + case TEST_UNIT_READY: + /* + * Mark associated FIB to not complete, + * eh handler does this + */ + for (count = 0; + count < (host->can_queue + AAC_NUM_MGT_FIB); + ++count) { + struct scsi_cmnd *command; + struct fib *fib = &aac->fibs[count]; + + command = fib->callback_data; + + if ((fib->hw_fib_va->header.XferState & + cpu_to_le32 + (Async | NoResponseExpected)) && + (fib->flags & FIB_CONTEXT_FLAG) && + ((command)) && + (command->device == cmd->device)) { + fib->flags |= + FIB_CONTEXT_FLAG_TIMED_OUT; + command->SCp.phase = + AAC_OWNER_ERROR_HANDLER; + if (command == cmd) + ret = SUCCESS; + } + } + break; } } return ret; @@ -628,70 +718,165 @@ static int aac_eh_reset(struct scsi_cmnd* cmd) { struct scsi_device * dev = cmd->device; struct Scsi_Host * host = dev->host; - struct scsi_cmnd * command; - int count; struct aac_dev * aac = (struct aac_dev *)host->hostdata; - unsigned long flags; - - /* Mark the associated FIB to not complete, eh handler does this */ - for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { - struct fib * fib = &aac->fibs[count]; - if (fib->hw_fib_va->header.XferState && - (fib->flags & FIB_CONTEXT_FLAG) && - (fib->callback_data == cmd)) { - fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; - cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; + int count; + u32 bus, cid; + int ret = FAILED; + + bus = aac_logical_to_phys(scmd_channel(cmd)); + cid = scmd_id(cmd); + if (bus < AAC_MAX_BUSES && cid < AAC_MAX_TARGETS && + aac->hba_map[bus][cid].devtype == AAC_DEVTYPE_NATIVE_RAW) { + struct fib *fib; + int status; + u64 address; + u8 command; + + pr_err("%s: Host adapter reset request. SCSI hang ?\n", + AAC_DRIVERNAME); + + fib = aac_fib_alloc(aac); + if (!fib) + return ret; + + + if (aac->hba_map[bus][cid].reset_state == 0) { + struct aac_hba_tm_req *tmf; + + /* start a HBA_TMF_LUN_RESET TMF request */ + tmf = (struct aac_hba_tm_req *)fib->hw_fib_va; + memset(tmf, 0, sizeof(*tmf)); + tmf->tmf = HBA_TMF_LUN_RESET; + tmf->it_nexus = aac->hba_map[bus][cid].rmw_nexus; + tmf->lun[1] = cmd->device->lun; + + address = (u64)fib->hw_error_pa; + tmf->error_ptr_hi = cpu_to_le32 + ((u32)(address >> 32)); + tmf->error_ptr_lo = cpu_to_le32 + ((u32)(address & 0xffffffff)); + tmf->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE); + fib->hbacmd_size = sizeof(*tmf); + + command = HBA_IU_TYPE_SCSI_TM_REQ; + aac->hba_map[bus][cid].reset_state++; + } else if (aac->hba_map[bus][cid].reset_state >= 1) { + struct aac_hba_reset_req *rst; + + /* already tried, start a hard reset now */ + rst = (struct aac_hba_reset_req *)fib->hw_fib_va; + memset(rst, 0, sizeof(*rst)); + /* reset_type is already zero... */ + rst->it_nexus = aac->hba_map[bus][cid].rmw_nexus; + + address = (u64)fib->hw_error_pa; + rst->error_ptr_hi = cpu_to_le32((u32)(address >> 32)); + rst->error_ptr_lo = cpu_to_le32 + ((u32)(address & 0xffffffff)); + rst->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE); + fib->hbacmd_size = sizeof(*rst); + + command = HBA_IU_TYPE_SATA_REQ; + aac->hba_map[bus][cid].reset_state = 0; } - } - printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n", - AAC_DRIVERNAME); + cmd->SCp.sent_command = 0; - if ((count = aac_check_health(aac))) - return count; - /* - * Wait for all commands to complete to this specific - * target (block maximum 60 seconds). - */ - for (count = 60; count; --count) { - int active = aac->in_reset; + status = aac_hba_send(command, fib, + (fib_callback) aac_hba_callback, + (void *) cmd); - if (active == 0) - __shost_for_each_device(dev, host) { - spin_lock_irqsave(&dev->list_lock, flags); - list_for_each_entry(command, &dev->cmd_list, list) { - if ((command != cmd) && - (command->SCp.phase == AAC_OWNER_FIRMWARE)) { - active++; - break; - } - } - spin_unlock_irqrestore(&dev->list_lock, flags); - if (active) + /* Wait up to 2 minutes for completion */ + for (count = 0; count < 120; ++count) { + if (cmd->SCp.sent_command) { + ret = SUCCESS; break; + } + msleep(1000); + } + + if (ret != SUCCESS) + pr_err("%s: Host adapter reset request timed out\n", + AAC_DRIVERNAME); + } else { + struct scsi_cmnd *command; + unsigned long flags; + + /* Mark the assoc. FIB to not complete, eh handler does this */ + for (count = 0; + count < (host->can_queue + AAC_NUM_MGT_FIB); + ++count) { + struct fib *fib = &aac->fibs[count]; + + if (fib->hw_fib_va->header.XferState && + (fib->flags & FIB_CONTEXT_FLAG) && + (fib->callback_data == cmd)) { + fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT; + cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; + } + } + + pr_err("%s: Host adapter reset request. SCSI hang ?\n", + AAC_DRIVERNAME); + + count = aac_check_health(aac); + if (count) + return count; + /* + * Wait for all commands to complete to this specific + * target (block maximum 60 seconds). + */ + for (count = 60; count; --count) { + int active = aac->in_reset; + + if (active == 0) + __shost_for_each_device(dev, host) { + spin_lock_irqsave(&dev->list_lock, flags); + list_for_each_entry(command, &dev->cmd_list, + list) { + if ((command != cmd) && + (command->SCp.phase == + AAC_OWNER_FIRMWARE)) { + active++; + break; + } + } + spin_unlock_irqrestore(&dev->list_lock, flags); + if (active) + break; + } + /* + * We can exit If all the commands are complete + */ + if (active == 0) + return SUCCESS; + ssleep(1); } + pr_err("%s: SCSI bus appears hung\n", AAC_DRIVERNAME); + /* - * We can exit If all the commands are complete + * This adapter needs a blind reset, only do so for + * Adapters that support a register, instead of a commanded, + * reset. */ - if (active == 0) - return SUCCESS; - ssleep(1); + if (((aac->supplement_adapter_info.SupportedOptions2 & + AAC_OPTION_MU_RESET) || + (aac->supplement_adapter_info.SupportedOptions2 & + AAC_OPTION_DOORBELL_RESET)) && + aac_check_reset && + ((aac_check_reset != 1) || + !(aac->supplement_adapter_info.SupportedOptions2 & + AAC_OPTION_IGNORE_RESET))) { + /* Bypass wait for command quiesce */ + aac_reset_adapter(aac, 2); + } + ret = SUCCESS; } - printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME); /* - * This adapter needs a blind reset, only do so for Adapters that - * support a register, instead of a commanded, reset. + * Cause an immediate retry of the command with a ten second delay + * after successful tur */ - if (((aac->supplement_adapter_info.SupportedOptions2 & - AAC_OPTION_MU_RESET) || - (aac->supplement_adapter_info.SupportedOptions2 & - AAC_OPTION_DOORBELL_RESET)) && - aac_check_reset && - ((aac_check_reset != 1) || - !(aac->supplement_adapter_info.SupportedOptions2 & - AAC_OPTION_IGNORE_RESET))) - aac_reset_adapter(aac, 2); /* Bypass wait for command quiesce */ - return SUCCESS; /* Cause an immediate retry of the command with a ten second delay after successful tur */ + return ret; } /** diff --git a/drivers/scsi/aacraid/src.c b/drivers/scsi/aacraid/src.c index 946a010e46df..1dd62a4aad2c 100644 --- a/drivers/scsi/aacraid/src.c +++ b/drivers/scsi/aacraid/src.c @@ -497,10 +497,35 @@ static int aac_src_deliver_message(struct fib *fib) vector_no = fib->vector_no; if (native_hba) { - ((struct aac_hba_cmd_req *)fib->hw_fib_va)->reply_qid - = vector_no; - ((struct aac_hba_cmd_req *)fib->hw_fib_va)->request_id - += (vector_no << 16); + if (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA_TMF) { + struct aac_hba_tm_req *tm_req; + + tm_req = (struct aac_hba_tm_req *) + fib->hw_fib_va; + if (tm_req->iu_type == + HBA_IU_TYPE_SCSI_TM_REQ) { + ((struct aac_hba_tm_req *) + fib->hw_fib_va)->reply_qid + = vector_no; + ((struct aac_hba_tm_req *) + fib->hw_fib_va)->request_id + += (vector_no << 16); + } else { + ((struct aac_hba_reset_req *) + fib->hw_fib_va)->reply_qid + = vector_no; + ((struct aac_hba_reset_req *) + fib->hw_fib_va)->request_id + += (vector_no << 16); + } + } else { + ((struct aac_hba_cmd_req *) + fib->hw_fib_va)->reply_qid + = vector_no; + ((struct aac_hba_cmd_req *) + fib->hw_fib_va)->request_id + += (vector_no << 16); + } } else { fib->hw_fib_va->header.Handle += (vector_no << 16); } -- 2.20.1