From 93bf9073a8a7e844b27327b05ab4dc608354d6fd Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 11 Apr 2016 16:29:32 -0700 Subject: [PATCH] PCI: thunder: Don't clobber read-only bits in bridge config registers The 32-bit addressing modes in the I/O and Prefetchable Memory registers are required to be read-only. Since the underlying access method allows them to be set, emulate their read-only nature and always set them. Signed-off-by: David Daney Signed-off-by: Bjorn Helgaas --- drivers/pci/host/pci-thunder-pem.c | 42 ++++++++++++++++++++++++------ 1 file changed, 34 insertions(+), 8 deletions(-) diff --git a/drivers/pci/host/pci-thunder-pem.c b/drivers/pci/host/pci-thunder-pem.c index cabb92a514ac..d4a779761472 100644 --- a/drivers/pci/host/pci-thunder-pem.c +++ b/drivers/pci/host/pci-thunder-pem.c @@ -153,11 +153,11 @@ static int thunder_pem_config_read(struct pci_bus *bus, unsigned int devfn, * reserved bits, this makes the code simpler and is OK as the bits * are not affected by writing zeros to them. */ -static u32 thunder_pem_bridge_w1c_bits(int where) +static u32 thunder_pem_bridge_w1c_bits(u64 where_aligned) { u32 w1c_bits = 0; - switch (where & ~3) { + switch (where_aligned) { case 0x04: /* Command/Status */ case 0x1c: /* Base and I/O Limit/Secondary Status */ w1c_bits = 0xff000000; @@ -184,12 +184,34 @@ static u32 thunder_pem_bridge_w1c_bits(int where) return w1c_bits; } +/* Some bits must be written to one so they appear to be read-only. */ +static u32 thunder_pem_bridge_w1_bits(u64 where_aligned) +{ + u32 w1_bits; + + switch (where_aligned) { + case 0x1c: /* I/O Base / I/O Limit, Secondary Status */ + /* Force 32-bit I/O addressing. */ + w1_bits = 0x0101; + break; + case 0x24: /* Prefetchable Memory Base / Prefetchable Memory Limit */ + /* Force 64-bit addressing */ + w1_bits = 0x00010001; + break; + default: + w1_bits = 0; + break; + } + return w1_bits; +} + static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { struct gen_pci *pci = bus->sysdata; struct thunder_pem_pci *pem_pci; u64 write_val, read_val; + u64 where_aligned = where & ~3ull; u32 mask = 0; pem_pci = container_of(pci, struct thunder_pem_pci, gen_pci); @@ -205,8 +227,7 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn, */ switch (size) { case 1: - read_val = where & ~3ull; - writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD); + writeq(where_aligned, pem_pci->pem_reg_base + PEM_CFG_RD); read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD); read_val >>= 32; mask = ~(0xff << (8 * (where & 3))); @@ -215,8 +236,7 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn, val |= (u32)read_val; break; case 2: - read_val = where & ~3ull; - writeq(read_val, pem_pci->pem_reg_base + PEM_CFG_RD); + writeq(where_aligned, pem_pci->pem_reg_base + PEM_CFG_RD); read_val = readq(pem_pci->pem_reg_base + PEM_CFG_RD); read_val >>= 32; mask = ~(0xffff << (8 * (where & 3))); @@ -243,12 +263,18 @@ static int thunder_pem_bridge_write(struct pci_bus *bus, unsigned int devfn, } } + /* + * Some bits must be read-only with value of one. Since the + * access method allows these to be cleared if a zero is + * written, force them to one before writing. + */ + val |= thunder_pem_bridge_w1_bits(where_aligned); + /* * Low order bits are the config address, the high order 32 * bits are the data to be written. */ - write_val = where & ~3ull; - write_val |= (((u64)val) << 32); + write_val = (((u64)val) << 32) | where_aligned; writeq(write_val, pem_pci->pem_reg_base + PEM_CFG_WR); return PCIBIOS_SUCCESSFUL; } -- 2.20.1