From 93b2dd12049d1adb0d76fb918fcd4c1030445433 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Sun, 8 Oct 2006 00:38:15 -0400 Subject: [PATCH] [PATCH] prism54: whitespace cleanup NET: prism54 - whitespace cleanup Signed-off-by: Dmitry Torokhov Signed-off-by: John W. Linville --- drivers/net/wireless/prism54/isl_38xx.c | 17 +++--- drivers/net/wireless/prism54/isl_38xx.h | 7 +-- drivers/net/wireless/prism54/isl_ioctl.c | 61 +++++++++---------- drivers/net/wireless/prism54/isl_ioctl.h | 1 - drivers/net/wireless/prism54/isl_oid.h | 32 +++++----- drivers/net/wireless/prism54/islpci_dev.c | 13 ++-- drivers/net/wireless/prism54/islpci_dev.h | 11 ++-- drivers/net/wireless/prism54/islpci_eth.c | 7 +-- drivers/net/wireless/prism54/islpci_eth.h | 1 - drivers/net/wireless/prism54/islpci_hotplug.c | 23 ++++--- drivers/net/wireless/prism54/islpci_mgt.c | 3 +- drivers/net/wireless/prism54/islpci_mgt.h | 5 +- drivers/net/wireless/prism54/oid_mgt.c | 6 +- drivers/net/wireless/prism54/prismcompat.h | 4 +- 14 files changed, 89 insertions(+), 102 deletions(-) diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c index 23deee69974b..02fc67bccbd0 100644 --- a/drivers/net/wireless/prism54/isl_38xx.c +++ b/drivers/net/wireless/prism54/isl_38xx.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003-2004 Luis R. Rodriguez _ * @@ -38,7 +37,7 @@ * isl38xx_disable_interrupts - disable all interrupts * @device: pci memory base address * - * Instructs the device to disable all interrupt reporting by asserting + * Instructs the device to disable all interrupt reporting by asserting * the IRQ line. New events may still show up in the interrupt identification * register located at offset %ISL38XX_INT_IDENT_REG. */ @@ -204,17 +203,19 @@ isl38xx_interface_reset(void __iomem *device_base, dma_addr_t host_address) /* enable the interrupt for detecting initialization */ /* Note: Do not enable other interrupts here. We want the - * device to have come up first 100% before allowing any other + * device to have come up first 100% before allowing any other * interrupts. */ isl38xx_w32_flush(device_base, ISL38XX_INT_IDENT_INIT, ISL38XX_INT_EN_REG); udelay(ISL38XX_WRITEIO_DELAY); /* allow complete full reset */ } void -isl38xx_enable_common_interrupts(void __iomem *device_base) { +isl38xx_enable_common_interrupts(void __iomem *device_base) +{ u32 reg; - reg = ( ISL38XX_INT_IDENT_UPDATE | - ISL38XX_INT_IDENT_SLEEP | ISL38XX_INT_IDENT_WAKEUP); + + reg = ISL38XX_INT_IDENT_UPDATE | ISL38XX_INT_IDENT_SLEEP | + ISL38XX_INT_IDENT_WAKEUP; isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG); udelay(ISL38XX_WRITEIO_DELAY); } @@ -234,23 +235,21 @@ isl38xx_in_queue(isl38xx_control_block *cb, int queue) /* send queues */ case ISL38XX_CB_TX_MGMTQ: BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); + case ISL38XX_CB_TX_DATA_LQ: case ISL38XX_CB_TX_DATA_HQ: BUG_ON(delta > ISL38XX_CB_TX_QSIZE); return delta; - break; /* receive queues */ case ISL38XX_CB_RX_MGMTQ: BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE); return ISL38XX_CB_MGMT_QSIZE - delta; - break; case ISL38XX_CB_RX_DATA_LQ: case ISL38XX_CB_RX_DATA_HQ: BUG_ON(delta > ISL38XX_CB_RX_QSIZE); return ISL38XX_CB_RX_QSIZE - delta; - break; } BUG(); return 0; diff --git a/drivers/net/wireless/prism54/isl_38xx.h b/drivers/net/wireless/prism54/isl_38xx.h index 8af20980af8d..3fadcb6f5297 100644 --- a/drivers/net/wireless/prism54/isl_38xx.h +++ b/drivers/net/wireless/prism54/isl_38xx.h @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * * This program is free software; you can redistribute it and/or modify @@ -67,10 +66,10 @@ * @base: (host) memory base address of the device * @val: 32bit value (host order) to write * @offset: byte offset into @base to write value to - * + * * This helper takes care of writing a 32bit datum to the - * specified offset into the device's pci memory space, and making sure - * the pci memory buffers get flushed by performing one harmless read + * specified offset into the device's pci memory space, and making sure + * the pci memory buffers get flushed by performing one harmless read * from the %ISL38XX_PCI_POSTING_FLUSH offset. */ static inline void diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c index 286325ca3293..4a20e45de3ca 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.c +++ b/drivers/net/wireless/prism54/isl_ioctl.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * (C) 2003,2004 Aurelien Alleaume * (C) 2003 Herbert Valerio Riedel @@ -55,12 +54,12 @@ static const unsigned char scan_rate_list[] = { 2, 4, 11, 22, * prism54_mib_mode_helper - MIB change mode helper function * @mib: the &struct islpci_mib object to modify * @iw_mode: new mode (%IW_MODE_*) - * + * * This is a helper function, hence it does not lock. Make sure - * caller deals with locking *if* necessary. This function sets the - * mode-dependent mib values and does the mapping of the Linux - * Wireless API modes to Device firmware modes. It also checks for - * correct valid Linux wireless modes. + * caller deals with locking *if* necessary. This function sets the + * mode-dependent mib values and does the mapping of the Linux + * Wireless API modes to Device firmware modes. It also checks for + * correct valid Linux wireless modes. */ static int prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode) @@ -118,7 +117,7 @@ prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode) * * this function initializes the struct given as @mib with defaults, * of which many are retrieved from the global module parameter - * variables. + * variables. */ void @@ -134,7 +133,7 @@ prism54_mib_init(islpci_private *priv) authen = CARD_DEFAULT_AUTHEN; wep = CARD_DEFAULT_WEP; filter = CARD_DEFAULT_FILTER; /* (0) Do not filter un-encrypted data */ - dot1x = CARD_DEFAULT_DOT1X; + dot1x = CARD_DEFAULT_DOT1X; mlme = CARD_DEFAULT_MLME_MODE; conformance = CARD_DEFAULT_CONFORMANCE; power = 127; @@ -228,7 +227,7 @@ prism54_get_wireless_stats(struct net_device *ndev) } else priv->iwstatistics.qual.updated = 0; - /* Update our wireless stats, but do not schedule to often + /* Update our wireless stats, but do not schedule to often * (max 1 HZ) */ if ((priv->stats_timestamp == 0) || time_after(jiffies, priv->stats_timestamp + 1 * HZ)) { @@ -705,7 +704,7 @@ prism54_get_scan(struct net_device *ndev, struct iw_request_info *info, * Starting with WE-17, the buffer can be as big as needed. * But the device won't repport anything if you change the value * of IWMAX_BSS=24. */ - + rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r); bsslist = r.ptr; @@ -785,7 +784,7 @@ prism54_get_essid(struct net_device *ndev, struct iw_request_info *info, return rvalue; } -/* Provides no functionality, just completes the ioctl. In essence this is a +/* Provides no functionality, just completes the ioctl. In essence this is a * just a cosmetic ioctl. */ static int @@ -1104,7 +1103,7 @@ prism54_set_encode(struct net_device *ndev, struct iw_request_info *info, &key); } /* - * If a valid key is set, encryption should be enabled + * If a valid key is set, encryption should be enabled * (user may turn it off later). * This is also how "iwconfig ethX key on" works */ @@ -1126,7 +1125,7 @@ prism54_set_encode(struct net_device *ndev, struct iw_request_info *info, } /* now read the flags */ if (dwrq->flags & IW_ENCODE_DISABLED) { - /* Encoding disabled, + /* Encoding disabled, * authen = DOT11_AUTH_OS; * invoke = 0; * exunencrypt = 0; */ @@ -1214,7 +1213,7 @@ prism54_get_txpower(struct net_device *ndev, struct iw_request_info *info, vwrq->value = (s32) r.u / 4; vwrq->fixed = 1; /* radio is not turned of - * btw: how is possible to turn off only the radio + * btw: how is possible to turn off only the radio */ vwrq->disabled = 0; @@ -2354,17 +2353,17 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, handle_request(priv, mlme, oid); send_formatted_event(priv, "Authenticate request (ex)", mlme, 1); - if (priv->iw_mode != IW_MODE_MASTER + if (priv->iw_mode != IW_MODE_MASTER && mlmeex->state != DOT11_STATE_AUTHING) break; confirm = kmalloc(sizeof(struct obj_mlmeex) + 6, GFP_ATOMIC); - if (!confirm) + if (!confirm) break; memcpy(&confirm->address, mlmeex->address, ETH_ALEN); - printk(KERN_DEBUG "Authenticate from: address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + printk(KERN_DEBUG "Authenticate from: address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", mlmeex->address[0], mlmeex->address[1], mlmeex->address[2], @@ -2398,10 +2397,10 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, handle_request(priv, mlme, oid); send_formatted_event(priv, "Associate request (ex)", mlme, 1); - if (priv->iw_mode != IW_MODE_MASTER + if (priv->iw_mode != IW_MODE_MASTER && mlmeex->state != DOT11_STATE_ASSOCING) break; - + confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC); if (!confirm) @@ -2417,7 +2416,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, if (!wpa_ie_len) { printk(KERN_DEBUG "No WPA IE found from " - "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", mlmeex->address[0], mlmeex->address[1], mlmeex->address[2], @@ -2435,14 +2434,14 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, mgt_set_varlen(priv, oid, confirm, wpa_ie_len); kfree(confirm); - + break; case DOT11_OID_REASSOCIATEEX: handle_request(priv, mlme, oid); send_formatted_event(priv, "Reassociate request (ex)", mlme, 1); - if (priv->iw_mode != IW_MODE_MASTER + if (priv->iw_mode != IW_MODE_MASTER && mlmeex->state != DOT11_STATE_ASSOCING) break; @@ -2461,7 +2460,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, if (!wpa_ie_len) { printk(KERN_DEBUG "No WPA IE found from " - "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", + "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n", mlmeex->address[0], mlmeex->address[1], mlmeex->address[2], @@ -2473,13 +2472,13 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid, break; } - confirm->size = wpa_ie_len; + confirm->size = wpa_ie_len; memcpy(&confirm->data, wpa_ie, wpa_ie_len); mgt_set_varlen(priv, oid, confirm, wpa_ie_len); kfree(confirm); - + break; default: @@ -2545,10 +2544,10 @@ enum { #define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \ ((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data)) -/* Maximum length for algorithm names (-1 for nul termination) +/* Maximum length for algorithm names (-1 for nul termination) * used in ioctl() */ #define HOSTAP_CRYPT_ALG_NAME_LEN 16 - + struct prism2_hostapd_param { u32 cmd; u8 sta_addr[ETH_ALEN]; @@ -2621,7 +2620,7 @@ prism2_ioctl_set_encryption(struct net_device *dev, &key); } /* - * If a valid key is set, encryption should be enabled + * If a valid key is set, encryption should be enabled * (user may turn it off later). * This is also how "iwconfig ethX key on" works */ @@ -2643,7 +2642,7 @@ prism2_ioctl_set_encryption(struct net_device *dev, } /* now read the flags */ if (param->u.crypt.flags & IW_ENCODE_DISABLED) { - /* Encoding disabled, + /* Encoding disabled, * authen = DOT11_AUTH_OS; * invoke = 0; * exunencrypt = 0; */ @@ -2710,7 +2709,7 @@ prism2_ioctl_set_generic_element(struct net_device *ndev, ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, len); - if (ret == 0) + if (ret == 0) printk(KERN_DEBUG "%s: WPA IE Attachment was set\n", ndev->name); } @@ -2870,7 +2869,7 @@ prism54_set_wpa(struct net_device *ndev, struct iw_request_info *info, mlme = DOT11_MLME_AUTO; printk("%s: Disabling WPA\n", ndev->name); break; - case 2: + case 2: case 1: /* WPA */ printk("%s: Enabling WPA\n", ndev->name); break; diff --git a/drivers/net/wireless/prism54/isl_ioctl.h b/drivers/net/wireless/prism54/isl_ioctl.h index 65f33acd0a42..e8183d30c52e 100644 --- a/drivers/net/wireless/prism54/isl_ioctl.h +++ b/drivers/net/wireless/prism54/isl_ioctl.h @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * (C) 2003 Aurelien Alleaume * (C) 2003 Luis R. Rodriguez diff --git a/drivers/net/wireless/prism54/isl_oid.h b/drivers/net/wireless/prism54/isl_oid.h index 419edf7ccf1a..ab5322768a4a 100644 --- a/drivers/net/wireless/prism54/isl_oid.h +++ b/drivers/net/wireless/prism54/isl_oid.h @@ -1,6 +1,4 @@ /* - * - * * Copyright (C) 2003 Herbert Valerio Riedel * Copyright (C) 2004 Luis R. Rodriguez * Copyright (C) 2004 Aurelien Alleaume @@ -23,7 +21,7 @@ #if !defined(_ISL_OID_H) #define _ISL_OID_H -/* +/* * MIB related constant and structure definitions for communicating * with the device firmware */ @@ -99,7 +97,7 @@ struct obj_attachment { char data[0]; } __attribute__((packed)); -/* +/* * in case everything's ok, the inlined function below will be * optimized away by the compiler... */ @@ -154,13 +152,13 @@ enum dot11_priv_t { /* Prism "Nitro" / Frameburst / "Packet Frame Grouping" * Value is in microseconds. Represents the # microseconds - * the firmware will take to group frames before sending out then out + * the firmware will take to group frames before sending out then out * together with a CSMA contention. Without this all frames are - * sent with a CSMA contention. - * Bibliography: + * sent with a CSMA contention. + * Bibliography: * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html */ -enum dot11_maxframeburst_t { +enum dot11_maxframeburst_t { /* Values for DOT11_OID_MAXFRAMEBURST */ DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */ DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */ @@ -176,9 +174,9 @@ enum dot11_maxframeburst_t { /* Support for 802.11 long and short frame preambles. * Long preamble uses 128-bit sync field, 8-bit CRC * Short preamble uses 56-bit sync field, 16-bit CRC - * + * * 802.11a -- not sure, both optionally ? - * 802.11b supports long and optionally short + * 802.11b supports long and optionally short * 802.11g supports both */ enum dot11_preamblesettings_t { DOT11_PREAMBLESETTING_LONG = 0, @@ -194,7 +192,7 @@ enum dot11_preamblesettings_t { * Long uses 802.11a slot timing (9 usec ?) * Short uses 802.11b slot timing (20 use ?) */ enum dot11_slotsettings_t { - DOT11_SLOTSETTINGS_LONG = 0, + DOT11_SLOTSETTINGS_LONG = 0, /* Allows *only* long 802.11b slot timing */ DOT11_SLOTSETTINGS_SHORT = 1, /* Allows *only* long 802.11a slot timing */ @@ -203,7 +201,7 @@ enum dot11_slotsettings_t { }; /* All you need to know, ERP is "Extended Rate PHY". - * An Extended Rate PHY (ERP) STA or AP shall support three different + * An Extended Rate PHY (ERP) STA or AP shall support three different * preamble and header formats: * Long preamble (refer to above) * Short preamble (refer to above) @@ -221,7 +219,7 @@ enum do11_nonerpstatus_t { /* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-* * The key here is DOT11 NON ERP NEVER protects against * NON ERP STA's. You *don't* want this unless - * you know what you are doing. It means you will only + * you know what you are doing. It means you will only * get Extended Rate capabilities */ enum dot11_nonerpprotection_t { DOT11_NONERP_NEVER = 0, @@ -229,13 +227,13 @@ enum dot11_nonerpprotection_t { DOT11_NONERP_DYNAMIC = 2 }; -/* Preset OID configuration for 802.11 modes - * Note: DOT11_OID_CW[MIN|MAX] hold the values of the +/* Preset OID configuration for 802.11 modes + * Note: DOT11_OID_CW[MIN|MAX] hold the values of the * DCS MIN|MAX backoff used */ enum dot11_profile_t { /* And set/allowed values */ /* Allowed values for DOT11_OID_PROFILES */ DOT11_PROFILE_B_ONLY = 0, - /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps + /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC * DOT11_OID_CWMIN: 31 * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC @@ -275,7 +273,7 @@ enum oid_inl_conformance_t { OID_INL_CONFORMANCE_NONE = 0, /* Perform active scanning */ OID_INL_CONFORMANCE_STRICT = 1, /* Strictly adhere to 802.11d */ OID_INL_CONFORMANCE_FLEXIBLE = 2, /* Use passed 802.11d info to - * determine channel AND/OR just make assumption that active + * determine channel AND/OR just make assumption that active * channels are valid channels */ }; diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c index ec1c00f19eb3..1e0603ca436c 100644 --- a/drivers/net/wireless/prism54/islpci_dev.c +++ b/drivers/net/wireless/prism54/islpci_dev.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003 Herbert Valerio Riedel * Copyright (C) 2003 Luis R. Rodriguez @@ -413,7 +412,7 @@ prism54_bring_down(islpci_private *priv) islpci_set_state(priv, PRV_STATE_PREBOOT); /* disable all device interrupts in case they weren't */ - isl38xx_disable_interrupts(priv->device_base); + isl38xx_disable_interrupts(priv->device_base); /* For safety reasons, we may want to ensure that no DMA transfer is * currently in progress by emptying the TX and RX queues. */ @@ -480,7 +479,7 @@ islpci_reset_if(islpci_private *priv) DEFINE_WAIT(wait); prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE); - + /* now the last step is to reset the interface */ isl38xx_interface_reset(priv->device_base, priv->device_host_address); islpci_set_state(priv, PRV_STATE_PREINIT); @@ -488,7 +487,7 @@ islpci_reset_if(islpci_private *priv) for(count = 0; count < 2 && result; count++) { /* The software reset acknowledge needs about 220 msec here. * Be conservative and wait for up to one second. */ - + remaining = schedule_timeout_uninterruptible(HZ); if(remaining > 0) { @@ -496,7 +495,7 @@ islpci_reset_if(islpci_private *priv) break; } - /* If we're here it's because our IRQ hasn't yet gone through. + /* If we're here it's because our IRQ hasn't yet gone through. * Retry a bit more... */ printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n", @@ -514,7 +513,7 @@ islpci_reset_if(islpci_private *priv) /* Now that the device is 100% up, let's allow * for the other interrupts -- - * NOTE: this is not *yet* true since we've only allowed the + * NOTE: this is not *yet* true since we've only allowed the * INIT interrupt on the IRQ line. We can perhaps poll * the IRQ line until we know for sure the reset went through */ isl38xx_enable_common_interrupts(priv->device_base); @@ -716,7 +715,7 @@ islpci_alloc_memory(islpci_private *priv) prism54_acl_init(&priv->acl); prism54_wpa_bss_ie_init(priv); - if (mgt_init(priv)) + if (mgt_init(priv)) goto out_free; return 0; diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h index 2f7e525d0cf6..a9aa1662eaa4 100644 --- a/drivers/net/wireless/prism54/islpci_dev.h +++ b/drivers/net/wireless/prism54/islpci_dev.h @@ -1,6 +1,5 @@ /* - * - * Copyright (C) 2002 Intersil Americas Inc. + * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003 Herbert Valerio Riedel * Copyright (C) 2003 Luis R. Rodriguez * Copyright (C) 2003 Aurelien Alleaume @@ -72,12 +71,12 @@ struct islpci_bss_wpa_ie { u8 bssid[ETH_ALEN]; u8 wpa_ie[MAX_WPA_IE_LEN]; size_t wpa_ie_len; - + }; typedef struct { spinlock_t slock; /* generic spinlock; */ - + u32 priv_oid; /* our mib cache */ @@ -85,7 +84,7 @@ typedef struct { struct rw_semaphore mib_sem; void **mib; char nickname[IW_ESSID_MAX_SIZE+1]; - + /* Take care of the wireless stats */ struct work_struct stats_work; struct semaphore stats_sem; @@ -120,7 +119,7 @@ typedef struct { struct net_device *ndev; /* device queue interface members */ - struct isl38xx_cb *control_block; /* device control block + struct isl38xx_cb *control_block; /* device control block (== driver_mem_address!) */ /* Each queue has three indexes: diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index bfbafe99b94a..676d83813dc8 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2004 Aurelien Alleaume * This program is free software; you can redistribute it and/or modify @@ -48,7 +47,7 @@ islpci_eth_cleanup_transmit(islpci_private *priv, /* read the index of the first fragment to be freed */ index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE; - /* check for holes in the arrays caused by multi fragment frames + /* check for holes in the arrays caused by multi fragment frames * searching for the last fragment of a frame */ if (priv->pci_map_tx_address[index] != (dma_addr_t) NULL) { /* entry is the last fragment of a frame @@ -285,7 +284,7 @@ islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb) (struct avs_80211_1_header *) skb_push(*skb, sizeof (struct avs_80211_1_header)); - + avs->version = cpu_to_be32(P80211CAPTURE_VERSION); avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header)); avs->mactime = cpu_to_be64(le64_to_cpu(clock)); @@ -391,7 +390,7 @@ islpci_eth_receive(islpci_private *priv) struct rx_annex_header *annex = (struct rx_annex_header *) skb->data; wstats.level = annex->rfmon.rssi; - /* The noise value can be a bit outdated if nobody's + /* The noise value can be a bit outdated if nobody's * reading wireless stats... */ wstats.noise = priv->local_iwstatistics.qual.noise; wstats.qual = wstats.level - wstats.noise; diff --git a/drivers/net/wireless/prism54/islpci_eth.h b/drivers/net/wireless/prism54/islpci_eth.h index bc9d7a60b8d6..26789454067c 100644 --- a/drivers/net/wireless/prism54/islpci_eth.h +++ b/drivers/net/wireless/prism54/islpci_eth.h @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index f692dccf0d07..f6354b1cbc28 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003 Herbert Valerio Riedel * @@ -40,8 +39,8 @@ static int init_pcitm = 0; module_param(init_pcitm, int, 0); /* In this order: vendor, device, subvendor, subdevice, class, class_mask, - * driver_data - * If you have an update for this please contact prism54-devel@prism54.org + * driver_data + * If you have an update for this please contact prism54-devel@prism54.org * The latest list can be found at http://prism54.org/supported_cards.php */ static const struct pci_device_id prism54_id_tbl[] = { /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ @@ -132,15 +131,15 @@ prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT) * 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT) - * The RETRY_TIMEOUT is used to set the number of retries that the core, as a - * Master, will perform before abandoning a cycle. The default value for - * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new - * devices. A write of zero to the RETRY_TIMEOUT register disables this - * function to allow use with any non-compliant legacy devices that may - * execute more retries. + * The RETRY_TIMEOUT is used to set the number of retries that the core, as a + * Master, will perform before abandoning a cycle. The default value for + * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new + * devices. A write of zero to the RETRY_TIMEOUT register disables this + * function to allow use with any non-compliant legacy devices that may + * execute more retries. * - * Writing zero to both these two registers will disable both timeouts and - * *can* solve problems caused by devices that are slow to respond. + * Writing zero to both these two registers will disable both timeouts and + * *can* solve problems caused by devices that are slow to respond. * Make this configurable - MSW */ if ( init_pcitm >= 0 ) { @@ -241,7 +240,7 @@ prism54_remove(struct pci_dev *pdev) isl38xx_disable_interrupts(priv->device_base); islpci_set_state(priv, PRV_STATE_OFF); /* This bellow causes a lockup at rmmod time. It might be - * because some interrupts still linger after rmmod time, + * because some interrupts still linger after rmmod time, * see bug #17 */ /* pci_set_power_state(pdev, 3);*/ /* try to power-off */ } diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c index 2e061a80b294..036a875054c9 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.c +++ b/drivers/net/wireless/prism54/islpci_mgt.c @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright 2004 Jens Maurer * @@ -502,7 +501,7 @@ islpci_mgt_transaction(struct net_device *ndev, printk(KERN_WARNING "%s: timeout waiting for mgmt response\n", ndev->name); - /* TODO: we should reset the device here */ + /* TODO: we should reset the device here */ out: finish_wait(&priv->mgmt_wqueue, &wait); up(&priv->mgmt_sem); diff --git a/drivers/net/wireless/prism54/islpci_mgt.h b/drivers/net/wireless/prism54/islpci_mgt.h index 2982be3363ef..fc53b587b722 100644 --- a/drivers/net/wireless/prism54/islpci_mgt.h +++ b/drivers/net/wireless/prism54/islpci_mgt.h @@ -1,5 +1,4 @@ /* - * * Copyright (C) 2002 Intersil Americas Inc. * Copyright (C) 2003 Luis R. Rodriguez * @@ -36,8 +35,8 @@ extern int pc_debug; /* General driver definitions */ -#define PCIDEVICE_LATENCY_TIMER_MIN 0x40 -#define PCIDEVICE_LATENCY_TIMER_VAL 0x50 +#define PCIDEVICE_LATENCY_TIMER_MIN 0x40 +#define PCIDEVICE_LATENCY_TIMER_VAL 0x50 /* Debugging verbose definitions */ #define SHOW_NOTHING 0x00 /* overrules everything */ diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c index ebb238785839..fbc52b6a3024 100644 --- a/drivers/net/wireless/prism54/oid_mgt.c +++ b/drivers/net/wireless/prism54/oid_mgt.c @@ -1,4 +1,4 @@ -/* +/* * Copyright (C) 2003,2004 Aurelien Alleaume * * This program is free software; you can redistribute it and/or modify @@ -503,7 +503,7 @@ mgt_set_varlen(islpci_private *priv, enum oid_num_t n, void *data, int extra_len } if (ret || response_op == PIMFOR_OP_ERROR) ret = -EIO; - } else + } else ret = -EIO; /* re-set given data to what it was */ @@ -727,7 +727,7 @@ mgt_commit(islpci_private *priv) * MEDIUMLIMIT,BEACONPERIOD,DTIMPERIOD,ATIMWINDOW,LISTENINTERVAL * FREQUENCY,EXTENDEDRATES. * - * The way to do this is to set ESSID. Note though that they may get + * The way to do this is to set ESSID. Note though that they may get * unlatch before though by setting another OID. */ #if 0 void diff --git a/drivers/net/wireless/prism54/prismcompat.h b/drivers/net/wireless/prism54/prismcompat.h index d71eca55a302..aa1d1747784f 100644 --- a/drivers/net/wireless/prism54/prismcompat.h +++ b/drivers/net/wireless/prism54/prismcompat.h @@ -1,4 +1,4 @@ -/* +/* * (C) 2004 Margit Schubert-While * * This program is free software; you can redistribute it and/or modify @@ -16,7 +16,7 @@ * */ -/* +/* * Compatibility header file to aid support of different kernel versions */ -- 2.20.1