From 9374549428820be10f01e217cec1b34cb3e3de6d Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 6 Feb 2007 10:45:43 -0800 Subject: [PATCH] sky2: Yukon Extreme support This is basic support for the new Yukon Extreme chip, extracted from the new vendor driver 10.0.4.3. Since this is untested hardware, it has a big fat warning for now. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/sky2.c | 49 ++++++++++++++++++++++++++++++---------- drivers/net/sky2.h | 56 ++++++++++++++++++++++++++++++++++++++++++---- 2 files changed, 89 insertions(+), 16 deletions(-) diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c96362dae800..8cd38eb4b925 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -140,7 +140,7 @@ static const u32 portirq_msk[] = { Y2_IS_PORT_1, Y2_IS_PORT_2 }; static const char *yukon2_name[] = { "XL", /* 0xb3 */ "EC Ultra", /* 0xb4 */ - "UNKNOWN", /* 0xb5 */ + "Extreme", /* 0xb5 */ "EC", /* 0xb6 */ "FE", /* 0xb7 */ }; @@ -211,7 +211,7 @@ static void sky2_power_on(struct sky2_hw *hw) else sky2_write8(hw, B2_Y2_CLK_GATE, 0); - if (hw->chip_id == CHIP_ID_YUKON_EC_U) { + if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) { u32 reg1; sky2_pci_write32(hw, PCI_DEV_REG3, 0); @@ -289,8 +289,10 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) struct sky2_port *sky2 = netdev_priv(hw->dev[port]); u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg; - if (sky2->autoneg == AUTONEG_ENABLE && - !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) { + if (sky2->autoneg == AUTONEG_ENABLE + && !(hw->chip_id == CHIP_ID_YUKON_XL + || hw->chip_id == CHIP_ID_YUKON_EC_U + || hw->chip_id == CHIP_ID_YUKON_EX)) { u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | @@ -317,8 +319,10 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* enable automatic crossover */ ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO); - if (sky2->autoneg == AUTONEG_ENABLE && - (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) { + if (sky2->autoneg == AUTONEG_ENABLE + && (hw->chip_id == CHIP_ID_YUKON_XL + || hw->chip_id == CHIP_ID_YUKON_EC_U + || hw->chip_id == CHIP_ID_YUKON_EX)) { ctrl &= ~PHY_M_PC_DSC_MSK; ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA; } @@ -473,7 +477,9 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* restore page register */ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); break; + case CHIP_ID_YUKON_EC_U: + case CHIP_ID_YUKON_EX: pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); /* select page 3 to access LED control register */ @@ -515,7 +521,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port) /* set page register to 0 */ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg); - } else { + } else if (hw->chip_id != CHIP_ID_YUKON_EX) { gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) { @@ -727,7 +733,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port) sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); - if (hw->chip_id == CHIP_ID_YUKON_EC_U) { + if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) { sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8); sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8); if (hw->dev[port]->mtu > ETH_DATA_LEN) { @@ -1687,7 +1693,9 @@ static void sky2_link_up(struct sky2_port *sky2) sky2_write8(hw, SK_REG(port, LNK_LED_REG), LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF); - if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) { + if (hw->chip_id == CHIP_ID_YUKON_XL + || hw->chip_id == CHIP_ID_YUKON_EC_U + || hw->chip_id == CHIP_ID_YUKON_EX) { u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR); u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */ @@ -1780,14 +1788,16 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux) sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; /* Pause bits are offset (9..8) */ - if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) + if (hw->chip_id == CHIP_ID_YUKON_XL + || hw->chip_id == CHIP_ID_YUKON_EC_U + || hw->chip_id == CHIP_ID_YUKON_EX) aux >>= 6; sky2->flow_status = sky2_flow(aux & PHY_M_PS_RX_P_EN, aux & PHY_M_PS_TX_P_EN); if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000 - && hw->chip_id != CHIP_ID_YUKON_EC_U) + && !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX)) sky2->flow_status = FC_NONE; if (aux & PHY_M_PS_RX_P_EN) @@ -2442,6 +2452,7 @@ static inline u32 sky2_mhz(const struct sky2_hw *hw) switch (hw->chip_id) { case CHIP_ID_YUKON_EC: case CHIP_ID_YUKON_EC_U: + case CHIP_ID_YUKON_EX: return 125; /* 125 Mhz */ case CHIP_ID_YUKON_FE: return 100; /* 100 Mhz */ @@ -2474,6 +2485,14 @@ static int __devinit sky2_init(struct sky2_hw *hw) return -EOPNOTSUPP; } + if (hw->chip_id == CHIP_ID_YUKON_EX) + dev_warn(&hw->pdev->dev, "this driver not yet tested on this chip type\n" + "Please report success or failure to \n"); + + /* Make sure and enable all clocks */ + if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U) + sky2_pci_write32(hw, PCI_DEV_REG3, 0); + hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4; /* This rev is really old, and requires untested workarounds */ @@ -2502,7 +2521,13 @@ static void sky2_reset(struct sky2_hw *hw) /* disable ASF */ if (hw->chip_id <= CHIP_ID_YUKON_EC) { - sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); + if (hw->chip_id == CHIP_ID_YUKON_EX) { + status = sky2_read16(hw, HCU_CCSR); + status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE | + HCU_CCSR_UC_STATE_MSK); + sky2_write16(hw, HCU_CCSR, status); + } else + sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET); sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE); } diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index a84584835ee1..3b0189569d52 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -371,12 +371,9 @@ enum { /* B2_CHIP_ID 8 bit Chip Identification Number */ enum { - CHIP_ID_GENESIS = 0x0a, /* Chip ID for GENESIS */ - CHIP_ID_YUKON = 0xb0, /* Chip ID for YUKON */ - CHIP_ID_YUKON_LITE = 0xb1, /* Chip ID for YUKON-Lite (Rev. A1-A3) */ - CHIP_ID_YUKON_LP = 0xb2, /* Chip ID for YUKON-LP */ CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */ CHIP_ID_YUKON_EC_U = 0xb4, /* Chip ID for YUKON-2 EC Ultra */ + CHIP_ID_YUKON_EX = 0xb5, /* Chip ID for YUKON-2 Extreme */ CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */ CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */ @@ -768,6 +765,24 @@ enum { POLL_LIST_ADDR_HI= 0x0e2c,/* 32 bit Poll. List Start Addr (high) */ }; +enum { + SMB_CFG = 0x0e40, /* 32 bit SMBus Config Register */ + SMB_CSR = 0x0e44, /* 32 bit SMBus Control/Status Register */ +}; + +enum { + CPU_WDOG = 0x0e48, /* 32 bit Watchdog Register */ + CPU_CNTR = 0x0e4C, /* 32 bit Counter Register */ + CPU_TIM = 0x0e50,/* 32 bit Timer Compare Register */ + CPU_AHB_ADDR = 0x0e54, /* 32 bit CPU AHB Debug Register */ + CPU_AHB_WDATA = 0x0e58, /* 32 bit CPU AHB Debug Register */ + CPU_AHB_RDATA = 0x0e5C, /* 32 bit CPU AHB Debug Register */ + HCU_MAP_BASE = 0x0e60, /* 32 bit Reset Mapping Base */ + CPU_AHB_CTRL = 0x0e64, /* 32 bit CPU AHB Debug Register */ + HCU_CCSR = 0x0e68, /* 32 bit CPU Control and Status Register */ + HCU_HCSR = 0x0e6C, /* 32 bit Host Control and Status Register */ +}; + /* ASF Subsystem Registers (Yukon-2 only) */ enum { B28_Y2_SMB_CONFIG = 0x0e40,/* 32 bit ASF SMBus Config Register */ @@ -1649,6 +1664,39 @@ enum { Y2_ASF_CLR_ASFI = 1<<1, /* Clear host IRQ */ Y2_ASF_HOST_IRQ = 1<<0, /* Issue an IRQ to HOST system */ }; +/* HCU_CCSR CPU Control and Status Register */ +enum { + HCU_CCSR_SMBALERT_MONITOR= 1<<27, /* SMBALERT pin monitor */ + HCU_CCSR_CPU_SLEEP = 1<<26, /* CPU sleep status */ + /* Clock Stretching Timeout */ + HCU_CCSR_CS_TO = 1<<25, + HCU_CCSR_WDOG = 1<<24, /* Watchdog Reset */ + + HCU_CCSR_CLR_IRQ_HOST = 1<<17, /* Clear IRQ_HOST */ + HCU_CCSR_SET_IRQ_HCU = 1<<16, /* Set IRQ_HCU */ + + HCU_CCSR_AHB_RST = 1<<9, /* Reset AHB bridge */ + HCU_CCSR_CPU_RST_MODE = 1<<8, /* CPU Reset Mode */ + + HCU_CCSR_SET_SYNC_CPU = 1<<5, + HCU_CCSR_CPU_CLK_DIVIDE_MSK = 3<<3,/* CPU Clock Divide */ + HCU_CCSR_CPU_CLK_DIVIDE_BASE= 1<<3, + HCU_CCSR_OS_PRSNT = 1<<2, /* ASF OS Present */ +/* Microcontroller State */ + HCU_CCSR_UC_STATE_MSK = 3, + HCU_CCSR_UC_STATE_BASE = 1<<0, + HCU_CCSR_ASF_RESET = 0, + HCU_CCSR_ASF_HALTED = 1<<1, + HCU_CCSR_ASF_RUNNING = 1<<0, +}; + +/* HCU_HCSR Host Control and Status Register */ +enum { + HCU_HCSR_SET_IRQ_CPU = 1<<16, /* Set IRQ_CPU */ + + HCU_HCSR_CLR_IRQ_HCU = 1<<1, /* Clear IRQ_HCU */ + HCU_HCSR_SET_IRQ_HOST = 1<<0, /* Set IRQ_HOST */ +}; /* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */ enum { -- 2.20.1