From 930d332a23682202c07df0276dd665a57755b37d Mon Sep 17 00:00:00 2001 From: Jun'ichi Nomura Date: Mon, 27 Mar 2006 01:17:47 -0800 Subject: [PATCH] [PATCH] drivers/md/dm-raid1.c: Fix inconsistent mirroring after interrupted recovery dm-mirror has potential data corruption problem: while on-disk log shows that all disk contents are in-sync, actual contents of the disks are not synchronized. This problem occurs if initial recovery (synching) is interrupted and resumed. Attached patch fixes this problem. Background: rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN (in-sync), which results in the corresponding bit of clean_bits being set. This is harmful if on-disk log is used and the map is removed/suspended before the initial sync is completed. The clean_bits is written down to the on-disk log at the map removal, and, upon resume, it's read and copied to sync_bits. Since the recovery process refers to the sync_bits to find a region to be recovered, the region whose state was changed from RH_NOSYNC to RH_CLEAN is no longer recovered. If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel sometimes ago, the contents of the mirrored disk just corrupt silently. If you have, balanced read may get bogus data from out-of-sync disks. The patch keeps RH_NOSYNC state unchanged. It will be changed to RH_RECOVERING when recovery starts and get reclaimed when the recovery completes. So it doesn't leak the region hash entry. Description: Keep RH_NOSYNC state unchanged when I/O on the region completes. rh_dec() changes the region state from RH_NOSYNC (out-of-sync) to RH_CLEAN (in-sync), which results in the corresponding bit of clean_bits being set. This is harmful if on-disk log is used and the map is removed/suspended before the initial sync is completed. The clean_bits is written down to the on-disk log at the map removal, and, upon resume, it's read and copied to sync_bits. Since the recovery process refers to the sync_bits to find a region to be recovered, the region whose state was changed from RH_NOSYNC to RH_CLEAN is no longer recovered. If you haven't applied dm-raid1-read-balancing.patch proposed in dm-devel sometimes ago, the contents of the mirrored disk just corrupt silently. If you have, balanced read may get bogus data from out-of-sync disks. The RH_NOSYNC region will be changed to RH_RECOVERING when recovery starts on the region and get reclaimed when the recovery completes. So it doesn't leak the region hash entry. Alasdair said: I've analysed the relevant part of the state machine and I believe that the patch is correct. (Further work on this code is still needed - this patch has the side-effect of holding onto memory unnecessarily for long periods of time under certain workloads - but better that than corrupting data.) Signed-off-by: Jun'ichi Nomura Acked-by: Alasdair G Kergon Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/md/dm-raid1.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 4e90f231fbfb..3d90f1b37e08 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -402,9 +402,21 @@ static void rh_dec(struct region_hash *rh, region_t region) spin_lock_irqsave(&rh->region_lock, flags); if (atomic_dec_and_test(®->pending)) { + /* + * There is no pending I/O for this region. + * We can move the region to corresponding list for next action. + * At this point, the region is not yet connected to any list. + * + * If the state is RH_NOSYNC, the region should be kept off + * from clean list. + * The hash entry for RH_NOSYNC will remain in memory + * until the region is recovered or the map is reloaded. + */ + + /* do nothing for RH_NOSYNC */ if (reg->state == RH_RECOVERING) { list_add_tail(®->list, &rh->quiesced_regions); - } else { + } else if (reg->state == RH_DIRTY) { reg->state = RH_CLEAN; list_add(®->list, &rh->clean_regions); } -- 2.20.1