From 927112696654f4c96a85aa8a494866cbc6ccfbe6 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 24 Feb 2012 03:40:53 -0800 Subject: [PATCH] hwmon: (adm1275) Add support for ADM1075 Signed-off-by: Guenter Roeck --- Documentation/hwmon/adm1275 | 30 +++++++++--- drivers/hwmon/pmbus/Kconfig | 4 +- drivers/hwmon/pmbus/adm1275.c | 88 +++++++++++++++++++++++++++++++++-- 3 files changed, 109 insertions(+), 13 deletions(-) diff --git a/Documentation/hwmon/adm1275 b/Documentation/hwmon/adm1275 index ab70d96d2dfd..535ad23ea704 100644 --- a/Documentation/hwmon/adm1275 +++ b/Documentation/hwmon/adm1275 @@ -2,6 +2,10 @@ Kernel driver adm1275 ===================== Supported chips: + * Analog Devices ADM1075 + Prefix: 'adm1075' + Addresses scanned: - + Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf * Analog Devices ADM1275 Prefix: 'adm1275' Addresses scanned: - @@ -17,13 +21,13 @@ Author: Guenter Roeck Description ----------- -This driver supports hardware montoring for Analog Devices ADM1275 and ADM1276 -Hot-Swap Controller and Digital Power Monitor. +This driver supports hardware montoring for Analog Devices ADM1075, ADM1275, +and ADM1276 Hot-Swap Controller and Digital Power Monitor. -ADM1275 and ADM1276 are hot-swap controllers that allow a circuit board to be -removed from or inserted into a live backplane. They also feature current and -voltage readback via an integrated 12-bit analog-to-digital converter (ADC), -accessed using a PMBus interface. +ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit +board to be removed from or inserted into a live backplane. They also feature +current and voltage readback via an integrated 12-bit analog-to-digital +converter (ADC), accessed using a PMBus interface. The driver is a client driver to the core PMBus driver. Please see Documentation/hwmon/pmbus for details on PMBus client drivers. @@ -36,6 +40,10 @@ This driver does not auto-detect devices. You will have to instantiate the devices explicitly. Please see Documentation/i2c/instantiating-devices for details. +The ADM1075, unlike many other PMBus devices, does not support internal voltage +or current scaling. Reported voltages, currents, and power are raw measurements, +and will typically have to be scaled. + Platform data support --------------------- @@ -51,7 +59,8 @@ The following attributes are supported. Limits are read-write, history reset attributes are write-only, all other attributes are read-only. in1_label "vin1" or "vout1" depending on chip variant and - configuration. + configuration. On ADM1075, vout1 reports the voltage on + the VAUX pin. in1_input Measured voltage. in1_min Minumum Voltage. in1_max Maximum voltage. @@ -74,3 +83,10 @@ curr1_crit Critical maximum current. Depending on the chip curr1_crit_alarm Critical current high alarm. curr1_highest Historical maximum current. curr1_reset_history Write any value to reset history. + +power1_label "pin1" +power1_input Input power. +power1_reset_history Write any value to reset history. + + Power attributes are supported on ADM1075 and ADM1276 + only. diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig index 1f0d0110b6b8..9246d0154f74 100644 --- a/drivers/hwmon/pmbus/Kconfig +++ b/drivers/hwmon/pmbus/Kconfig @@ -31,8 +31,8 @@ config SENSORS_ADM1275 default n help If you say yes here you get hardware monitoring support for Analog - Devices ADM1275 and ADM1276 Hot-Swap Controller and Digital Power - Monitor. + Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital + Power Monitors. This driver can also be built as a module. If so, the module will be called adm1275. diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c index 5e4421e57eb0..60aad9570f01 100644 --- a/drivers/hwmon/pmbus/adm1275.c +++ b/drivers/hwmon/pmbus/adm1275.c @@ -23,7 +23,7 @@ #include #include "pmbus.h" -enum chips { adm1275, adm1276 }; +enum chips { adm1075, adm1275, adm1276 }; #define ADM1275_PEAK_IOUT 0xd0 #define ADM1275_PEAK_VIN 0xd1 @@ -32,6 +32,9 @@ enum chips { adm1275, adm1276 }; #define ADM1275_VIN_VOUT_SELECT (1 << 6) #define ADM1275_VRANGE (1 << 5) +#define ADM1075_IRANGE_50 (1 << 4) +#define ADM1075_IRANGE_25 (1 << 3) +#define ADM1075_IRANGE_MASK ((1 << 3) | (1 << 4)) #define ADM1275_IOUT_WARN2_LIMIT 0xd7 #define ADM1275_DEVICE_CONFIG 0xd8 @@ -42,6 +45,14 @@ enum chips { adm1275, adm1276 }; #define ADM1275_MFR_STATUS_IOUT_WARN2 (1 << 0) +#define ADM1075_READ_VAUX 0xdd +#define ADM1075_VAUX_OV_WARN_LIMIT 0xde +#define ADM1075_VAUX_UV_WARN_LIMIT 0xdf +#define ADM1075_VAUX_STATUS 0xf6 + +#define ADM1075_VAUX_OV_WARN (1<<7) +#define ADM1075_VAUX_UV_WARN (1<<6) + struct adm1275_data { int id; bool have_oc_fault; @@ -74,6 +85,29 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) } ret = pmbus_read_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT); break; + case PMBUS_VOUT_OV_WARN_LIMIT: + if (data->id != adm1075) { + ret = -ENODATA; + break; + } + ret = pmbus_read_word_data(client, 0, + ADM1075_VAUX_OV_WARN_LIMIT); + break; + case PMBUS_VOUT_UV_WARN_LIMIT: + if (data->id != adm1075) { + ret = -ENODATA; + break; + } + ret = pmbus_read_word_data(client, 0, + ADM1075_VAUX_UV_WARN_LIMIT); + break; + case PMBUS_READ_VOUT: + if (data->id != adm1075) { + ret = -ENODATA; + break; + } + ret = pmbus_read_word_data(client, 0, ADM1075_READ_VAUX); + break; case PMBUS_VIRT_READ_IOUT_MAX: ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_IOUT); break; @@ -84,7 +118,7 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) ret = pmbus_read_word_data(client, 0, ADM1275_PEAK_VIN); break; case PMBUS_VIRT_READ_PIN_MAX: - if (data->id != adm1276) { + if (data->id == adm1275) { ret = -ENXIO; break; } @@ -95,7 +129,7 @@ static int adm1275_read_word_data(struct i2c_client *client, int page, int reg) case PMBUS_VIRT_RESET_VIN_HISTORY: break; case PMBUS_VIRT_RESET_PIN_HISTORY: - if (data->id != adm1276) + if (data->id == adm1275) ret = -ENXIO; break; default: @@ -163,6 +197,19 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg) PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT; } break; + case PMBUS_STATUS_VOUT: + if (data->id != adm1075) { + ret = -ENODATA; + break; + } + ret = 0; + mfr_status = pmbus_read_byte_data(client, 0, + ADM1075_VAUX_STATUS); + if (mfr_status & ADM1075_VAUX_OV_WARN) + ret |= PB_VOLTAGE_OV_WARNING; + if (mfr_status & ADM1075_VAUX_UV_WARN) + ret |= PB_VOLTAGE_UV_WARNING; + break; default: ret = -ENODATA; break; @@ -171,6 +218,7 @@ static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg) } static const struct i2c_device_id adm1275_id[] = { + { "adm1075", adm1075 }, { "adm1275", adm1275 }, { "adm1276", adm1276 }, { } @@ -251,7 +299,14 @@ static int adm1275_probe(struct i2c_client *client, info->read_byte_data = adm1275_read_byte_data; info->write_word_data = adm1275_write_word_data; - if (config & ADM1275_VRANGE) { + if (data->id == adm1075) { + info->m[PSC_VOLTAGE_IN] = 27169; + info->b[PSC_VOLTAGE_IN] = 0; + info->R[PSC_VOLTAGE_IN] = -1; + info->m[PSC_VOLTAGE_OUT] = 27169; + info->b[PSC_VOLTAGE_OUT] = 0; + info->R[PSC_VOLTAGE_OUT] = -1; + } else if (config & ADM1275_VRANGE) { info->m[PSC_VOLTAGE_IN] = 19199; info->b[PSC_VOLTAGE_IN] = 0; info->R[PSC_VOLTAGE_IN] = -2; @@ -271,6 +326,31 @@ static int adm1275_probe(struct i2c_client *client, data->have_oc_fault = true; switch (data->id) { + case adm1075: + info->format[PSC_POWER] = direct; + info->b[PSC_POWER] = 0; + info->R[PSC_POWER] = -1; + switch (config & ADM1075_IRANGE_MASK) { + case ADM1075_IRANGE_25: + info->m[PSC_POWER] = 8549; + info->m[PSC_CURRENT_OUT] = 806; + break; + case ADM1075_IRANGE_50: + info->m[PSC_POWER] = 4279; + info->m[PSC_CURRENT_OUT] = 404; + break; + default: + dev_err(&client->dev, "Invalid input current range"); + info->m[PSC_POWER] = 0; + info->m[PSC_CURRENT_OUT] = 0; + break; + } + info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN + | PMBUS_HAVE_STATUS_INPUT; + if (config & ADM1275_VIN_VOUT_SELECT) + info->func[0] |= + PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; + break; case adm1275: if (config & ADM1275_VIN_VOUT_SELECT) info->func[0] |= -- 2.20.1