From 921a86e0e306e42452e16894f2cc792659ede16b Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Thu, 12 Aug 2010 23:14:07 +0200 Subject: [PATCH] Staging: Add SBE 2T3E3 WAN driver MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This is a driver for SBE Inc.'s dual port T3/E3 WAN cards. Based on their original GPLed driver. The original driver tarball is now accessible at http://userweb.kernel.org/~chris/SBE_2T3_Linux_2.0c.tgz It needs at least a new generic HDLC setup code (not yet written) before moving to drivers/net/wan. Signed-off-by: Krzysztof Hałasa Signed-off-by: Greg Kroah-Hartman --- drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/sbe-2t3e3/2t3e3.h | 894 +++++++++++++++++++++++++++ drivers/staging/sbe-2t3e3/Kconfig | 13 + drivers/staging/sbe-2t3e3/Makefile | 4 + drivers/staging/sbe-2t3e3/TODO | 6 + drivers/staging/sbe-2t3e3/cpld.c | 366 +++++++++++ drivers/staging/sbe-2t3e3/ctrl.c | 362 +++++++++++ drivers/staging/sbe-2t3e3/ctrl.h | 131 ++++ drivers/staging/sbe-2t3e3/dc.c | 502 +++++++++++++++ drivers/staging/sbe-2t3e3/exar7250.c | 217 +++++++ drivers/staging/sbe-2t3e3/exar7300.c | 182 ++++++ drivers/staging/sbe-2t3e3/intr.c | 635 +++++++++++++++++++ drivers/staging/sbe-2t3e3/io.c | 352 +++++++++++ drivers/staging/sbe-2t3e3/main.c | 171 +++++ drivers/staging/sbe-2t3e3/maps.c | 104 ++++ drivers/staging/sbe-2t3e3/module.c | 210 +++++++ drivers/staging/sbe-2t3e3/netdev.c | 142 +++++ 18 files changed, 4294 insertions(+) create mode 100644 drivers/staging/sbe-2t3e3/2t3e3.h create mode 100644 drivers/staging/sbe-2t3e3/Kconfig create mode 100644 drivers/staging/sbe-2t3e3/Makefile create mode 100644 drivers/staging/sbe-2t3e3/TODO create mode 100644 drivers/staging/sbe-2t3e3/cpld.c create mode 100644 drivers/staging/sbe-2t3e3/ctrl.c create mode 100644 drivers/staging/sbe-2t3e3/ctrl.h create mode 100644 drivers/staging/sbe-2t3e3/dc.c create mode 100644 drivers/staging/sbe-2t3e3/exar7250.c create mode 100644 drivers/staging/sbe-2t3e3/exar7300.c create mode 100644 drivers/staging/sbe-2t3e3/intr.c create mode 100644 drivers/staging/sbe-2t3e3/io.c create mode 100644 drivers/staging/sbe-2t3e3/main.c create mode 100644 drivers/staging/sbe-2t3e3/maps.c create mode 100644 drivers/staging/sbe-2t3e3/module.c create mode 100644 drivers/staging/sbe-2t3e3/netdev.c diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index c070b216e1ac..a3897c52afa0 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -155,5 +155,7 @@ source "drivers/staging/quickstart/Kconfig" source "drivers/staging/westbridge/Kconfig" +source "drivers/staging/sbe-2t3e3/Kconfig" + endif # !STAGING_EXCLUDE_BUILD endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 90d89ea47b80..3645acf8da83 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -58,3 +58,4 @@ obj-$(CONFIG_SOLO6X10) += solo6x10/ obj-$(CONFIG_TIDSPBRIDGE) += tidspbridge/ obj-$(CONFIG_ACPI_QUICKSTART) += quickstart/ obj-$(CONFIG_WESTBRIDGE_ASTORIA) += westbridge/astoria/ +obj-$(CONFIG_SBE_2T3E3) += sbe-2t3e3/ diff --git a/drivers/staging/sbe-2t3e3/2t3e3.h b/drivers/staging/sbe-2t3e3/2t3e3.h new file mode 100644 index 000000000000..fe9f086b6e7a --- /dev/null +++ b/drivers/staging/sbe-2t3e3/2t3e3.h @@ -0,0 +1,894 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#ifndef T3E3_H +#define T3E3_H + +#include +#include +#include +#include +#include +#include "ctrl.h" + +/************************************************************** + * 21143 + **************************************************************/ + +/* CSR */ +#define SBE_2T3E3_21143_REG_BUS_MODE 0 +#define SBE_2T3E3_21143_REG_TRANSMIT_POLL_DEMAND 1 +#define SBE_2T3E3_21143_REG_RECEIVE_POLL_DEMAND 2 +#define SBE_2T3E3_21143_REG_RECEIVE_LIST_BASE_ADDRESS 3 +#define SBE_2T3E3_21143_REG_TRANSMIT_LIST_BASE_ADDRESS 4 +#define SBE_2T3E3_21143_REG_STATUS 5 +#define SBE_2T3E3_21143_REG_OPERATION_MODE 6 +#define SBE_2T3E3_21143_REG_INTERRUPT_ENABLE 7 +#define SBE_2T3E3_21143_REG_MISSED_FRAMES_AND_OVERFLOW_COUNTER 8 +#define SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT 9 +#define SBE_2T3E3_21143_REG_BOOT_ROM_PROGRAMMING_ADDRESS 10 +#define SBE_2T3E3_21143_REG_GENERAL_PURPOSE_TIMER_AND_INTERRUPT_MITIGATION_CONTROL 11 +#define SBE_2T3E3_21143_REG_SIA_STATUS 12 +#define SBE_2T3E3_21143_REG_SIA_CONNECTIVITY 13 +#define SBE_2T3E3_21143_REG_SIA_TRANSMIT_AND_RECEIVE 14 +#define SBE_2T3E3_21143_REG_SIA_AND_GENERAL_PURPOSE_PORT 15 +#define SBE_2T3E3_21143_REG_MAX 16 + +/* CSR0 - BUS_MODE */ +#define SBE_2T3E3_21143_VAL_WRITE_AND_INVALIDATE_ENABLE 0x01000000 +#define SBE_2T3E3_21143_VAL_READ_LINE_ENABLE 0x00800000 +#define SBE_2T3E3_21143_VAL_READ_MULTIPLE_ENABLE 0x00200000 +#define SBE_2T3E3_21143_VAL_TRANSMIT_AUTOMATIC_POLLING_200us 0x00020000 +#define SBE_2T3E3_21143_VAL_TRANSMIT_AUTOMATIC_POLLING_DISABLED 0x00000000 +#define SBE_2T3E3_21143_VAL_CACHE_ALIGNMENT_32 0x0000c000 +#define SBE_2T3E3_21143_VAL_CACHE_ALIGNMENT_16 0x00008000 +#define SBE_2T3E3_21143_VAL_CACHE_ALIGNMENT_8 0x00004000 +#define SBE_2T3E3_21143_VAL_BUS_ARBITRATION_RR 0x00000002 +#define SBE_2T3E3_21143_VAL_SOFTWARE_RESET 0x00000001 + +/* CSR5 - STATUS */ +#define SBE_2T3E3_21143_VAL_GENERAL_PURPOSE_PORT_INTERRUPT 0x04000000 +#define SBE_2T3E3_21143_VAL_ERROR_BITS 0x03800000 +#define SBE_2T3E3_21143_VAL_PARITY_ERROR 0x00000000 +#define SBE_2T3E3_21143_VAL_MASTER_ABORT 0x00800000 +#define SBE_2T3E3_21143_VAL_TARGET_ABORT 0x01000000 +#define SBE_2T3E3_21143_VAL_TRANSMISSION_PROCESS_STATE 0x00700000 +#define SBE_2T3E3_21143_VAL_TX_STOPPED 0x00000000 +#define SBE_2T3E3_21143_VAL_TX_SUSPENDED 0x00600000 +#define SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STATE 0x000e0000 +#define SBE_2T3E3_21143_VAL_RX_STOPPED 0x00000000 +#define SBE_2T3E3_21143_VAL_RX_SUSPENDED 0x000a0000 +#define SBE_2T3E3_21143_VAL_NORMAL_INTERRUPT_SUMMARY 0x00010000 +#define SBE_2T3E3_21143_VAL_ABNORMAL_INTERRUPT_SUMMARY 0x00008000 +#define SBE_2T3E3_21143_VAL_EARLY_RECEIVE_INTERRUPT 0x00004000 +#define SBE_2T3E3_21143_VAL_FATAL_BUS_ERROR 0x00002000 +#define SBE_2T3E3_21143_VAL_GENERAL_PURPOSE_TIMER_EXPIRED 0x00000800 +#define SBE_2T3E3_21143_VAL_EARLY_TRANSMIT_INTERRUPT 0x00000400 +#define SBE_2T3E3_21143_VAL_RECEIVE_WATCHDOG_TIMEOUT 0x00000200 +#define SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STOPPED 0x00000100 +#define SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE 0x00000080 +#define SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT 0x00000040 +#define SBE_2T3E3_21143_VAL_TRANSMIT_UNDERFLOW 0x00000020 +#define SBE_2T3E3_21143_VAL_TRANSMIT_JABBER_TIMEOUT 0x00000008 +#define SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE 0x00000004 +#define SBE_2T3E3_21143_VAL_TRANSMIT_PROCESS_STOPPED 0x00000002 +#define SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT 0x00000001 + +/* CSR6 - OPERATION_MODE */ +#define SBE_2T3E3_21143_VAL_SPECIAL_CAPTURE_EFFECT_ENABLE 0x80000000 +#define SBE_2T3E3_21143_VAL_RECEIVE_ALL 0x40000000 +#define SBE_2T3E3_21143_VAL_MUST_BE_ONE 0x02000000 +#define SBE_2T3E3_21143_VAL_SCRAMBLER_MODE 0x01000000 +#define SBE_2T3E3_21143_VAL_PCS_FUNCTION 0x00800000 +#define SBE_2T3E3_21143_VAL_TRANSMIT_THRESHOLD_MODE_10Mbs 0x00400000 +#define SBE_2T3E3_21143_VAL_TRANSMIT_THRESHOLD_MODE_100Mbs 0x00000000 +#define SBE_2T3E3_21143_VAL_STORE_AND_FORWARD 0x00200000 +#define SBE_2T3E3_21143_VAL_HEARTBEAT_DISABLE 0x00080000 +#define SBE_2T3E3_21143_VAL_PORT_SELECT 0x00040000 +#define SBE_2T3E3_21143_VAL_CAPTURE_EFFECT_ENABLE 0x00020000 +#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS 0x0000c000 +#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_1 0x00000000 +#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_2 0x00004000 +#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_3 0x00008000 +#define SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_4 0x0000c000 +#define SBE_2T3E3_21143_VAL_TRANSMISSION_START 0x00002000 +#define SBE_2T3E3_21143_VAL_OPERATING_MODE 0x00000c00 +#define SBE_2T3E3_21143_VAL_LOOPBACK_OFF 0x00000000 +#define SBE_2T3E3_21143_VAL_LOOPBACK_EXTERNAL 0x00000800 +#define SBE_2T3E3_21143_VAL_LOOPBACK_INTERNAL 0x00000400 +#define SBE_2T3E3_21143_VAL_FULL_DUPLEX_MODE 0x00000200 +#define SBE_2T3E3_21143_VAL_PASS_ALL_MULTICAST 0x00000080 +#define SBE_2T3E3_21143_VAL_PROMISCUOUS_MODE 0x00000040 +#define SBE_2T3E3_21143_VAL_PASS_BAD_FRAMES 0x00000008 +#define SBE_2T3E3_21143_VAL_RECEIVE_START 0x00000002 + +/* CSR7 - INTERRUPT_ENABLE */ +#define SBE_2T3E3_21143_VAL_LINK_CHANGED_ENABLE 0x08000000 +#define SBE_2T3E3_21143_VAL_GENERAL_PURPOSE_PORT_ENABLE 0x04000000 +#define SBE_2T3E3_21143_VAL_NORMAL_INTERRUPT_SUMMARY_ENABLE 0x00010000 +#define SBE_2T3E3_21143_VAL_ABNORMAL_INTERRUPT_SUMMARY_ENABLE 0x00008000 +#define SBE_2T3E3_21143_VAL_EARLY_RECEIVE_INTERRUPT_ENABLE 0x00004000 +#define SBE_2T3E3_21143_VAL_FATAL_BUS_ERROR_ENABLE 0x00002000 +#define SBE_2T3E3_21143_VAL_LINK_FAIL_ENABLE 0x00001000 +#define SBE_2T3E3_21143_VAL_GENERAL_PURPOSE_TIMER_ENABLE 0x00000800 +#define SBE_2T3E3_21143_VAL_EARLY_TRANSMIT_INTERRUPT_ENABLE 0x00000400 +#define SBE_2T3E3_21143_VAL_RECEIVE_WATCHDOG_TIMEOUT_ENABLE 0x00000200 +#define SBE_2T3E3_21143_VAL_RECEIVE_STOPPED_ENABLE 0x00000100 +#define SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE_ENABLE 0x00000080 +#define SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT_ENABLE 0x00000040 +#define SBE_2T3E3_21143_VAL_TRANSMIT_UNDERFLOW_INTERRUPT_ENABLE 0x00000020 +#define SBE_2T3E3_21143_VAL_TRANSMIT_JABBER_TIMEOUT_ENABLE 0x00000008 +#define SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE_ENABLE 0x00000004 +#define SBE_2T3E3_21143_VAL_TRANSMIT_STOPPED_ENABLE 0x00000002 +#define SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT_ENABLE 0x00000001 + +/* CSR8 - MISSED_FRAMES_AND_OVERFLOW_COUNTER */ +#define SBE_2T3E3_21143_VAL_OVERFLOW_COUNTER_OVERFLOW 0x10000000 +#define SBE_2T3E3_21143_VAL_OVERFLOW_COUNTER 0x0ffe0000 +#define SBE_2T3E3_21143_VAL_MISSED_FRAME_OVERFLOW 0x00010000 +#define SBE_2T3E3_21143_VAL_MISSED_FRAMES_COUNTER 0x0000ffff + +/* CSR9 - BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT */ +#define SBE_2T3E3_21143_VAL_MII_MANAGEMENT_DATA_IN 0x00080000 +#define SBE_2T3E3_21143_VAL_MII_MANAGEMENT_READ_MODE 0x00040000 +#define SBE_2T3E3_21143_VAL_MII_MANAGEMENT_DATA_OUT 0x00020000 +#define SBE_2T3E3_21143_VAL_MII_MANAGEMENT_CLOCK 0x00010000 +#define SBE_2T3E3_21143_VAL_READ_OPERATION 0x00004000 +#define SBE_2T3E3_21143_VAL_WRITE_OPERATION 0x00002000 +#define SBE_2T3E3_21143_VAL_BOOT_ROM_SELECT 0x00001000 +#define SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT 0x00000800 +#define SBE_2T3E3_21143_VAL_BOOT_ROM_DATA 0x000000ff +#define SBE_2T3E3_21143_VAL_SERIAL_ROM_DATA_OUT 0x00000008 +#define SBE_2T3E3_21143_VAL_SERIAL_ROM_DATA_IN 0x00000004 +#define SBE_2T3E3_21143_VAL_SERIAL_ROM_CLOCK 0x00000002 +#define SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT 0x00000001 + +/* CSR11 - GENERAL_PURPOSE_TIMER_AND_INTERRUPT_MITIGATION_CONTROL */ +#define SBE_2T3E3_21143_VAL_CYCLE_SIZE 0x80000000 +#define SBE_2T3E3_21143_VAL_TRANSMIT_TIMER 0x78000000 +#define SBE_2T3E3_21143_VAL_NUMBER_OF_TRANSMIT_PACKETS 0x07000000 +#define SBE_2T3E3_21143_VAL_RECEIVE_TIMER 0x00f00000 +#define SBE_2T3E3_21143_VAL_NUMBER_OF_RECEIVE_PACKETS 0x000e0000 +#define SBE_2T3E3_21143_VAL_CONTINUOUS_MODE 0x00010000 +#define SBE_2T3E3_21143_VAL_TIMER_VALUE 0x0000ffff + +/* CSR12 - SIA_STATUS */ +#define SBE_2T3E3_21143_VAL_10BASE_T_RECEIVE_PORT_ACTIVITY 0x00000200 +#define SBE_2T3E3_21143_VAL_AUI_RECEIVE_PORT_ACTIVITY 0x00000100 +#define SBE_2T3E3_21143_VAL_10Mbs_LINK_STATUS 0x00000004 +#define SBE_2T3E3_21143_VAL_100Mbs_LINK_STATUS 0x00000002 +#define SBE_2T3E3_21143_VAL_MII_RECEIVE_PORT_ACTIVITY 0x00000001 + +/* CSR13 - SIA_CONNECTIVITY */ +#define SBE_2T3E3_21143_VAL_10BASE_T_OR_AUI 0x00000008 +#define SBE_2T3E3_21143_VAL_SIA_RESET 0x00000001 + +/* CSR14 - SIA_TRANSMIT_AND_RECEIVE */ +#define SBE_2T3E3_21143_VAL_100BASE_TX_FULL_DUPLEX 0x00020000 +#define SBE_2T3E3_21143_VAL_COLLISION_DETECT_ENABLE 0x00000400 +#define SBE_2T3E3_21143_VAL_COLLISION_SQUELCH_ENABLE 0x00000200 +#define SBE_2T3E3_21143_VAL_RECEIVE_SQUELCH_ENABLE 0x00000100 +#define SBE_2T3E3_21143_VAL_LINK_PULSE_SEND_ENABLE 0x00000004 +#define SBE_2T3E3_21143_VAL_ENCODER_ENABLE 0x00000001 + +/* CSR15 - SIA_AND_GENERAL_PURPOSE_PORT */ +#define SBE_2T3E3_21143_VAL_RECEIVE_WATCHDOG_DISABLE 0x00000010 +#define SBE_2T3E3_21143_VAL_AUI_BNC_MODE 0x00000008 +#define SBE_2T3E3_21143_VAL_HOST_UNJAB 0x00000002 +#define SBE_2T3E3_21143_VAL_JABBER_DISABLE 0x00000001 + +/************************************************************** + * CPLD + **************************************************************/ + +/* reg_map indexes */ +#define SBE_2T3E3_CPLD_REG_PCRA 0 +#define SBE_2T3E3_CPLD_REG_PCRB 1 +#define SBE_2T3E3_CPLD_REG_PLCR 2 +#define SBE_2T3E3_CPLD_REG_PLTR 3 +#define SBE_2T3E3_CPLD_REG_PPFR 4 +#define SBE_2T3E3_CPLD_REG_BOARD_ID 5 +#define SBE_2T3E3_CPLD_REG_FPGA_VERSION 6 +#define SBE_2T3E3_CPLD_REG_FRAMER_BASE_ADDRESS 7 +#define SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT 8 +#define SBE_2T3E3_CPLD_REG_STATIC_RESET 9 +#define SBE_2T3E3_CPLD_REG_PULSE_RESET 10 +#define SBE_2T3E3_CPLD_REG_FPGA_RECONFIGURATION 11 +#define SBE_2T3E3_CPLD_REG_LEDR 12 +#define SBE_2T3E3_CPLD_REG_PICSR 13 +#define SBE_2T3E3_CPLD_REG_PIER 14 +#define SBE_2T3E3_CPLD_REG_PCRC 15 +#define SBE_2T3E3_CPLD_REG_PBWF 16 +#define SBE_2T3E3_CPLD_REG_PBWL 17 + +#define SBE_2T3E3_CPLD_REG_MAX 18 + +/**********/ + +/* val_map indexes */ +#define SBE_2T3E3_CPLD_VAL_LIU_SELECT 0 +#define SBE_2T3E3_CPLD_VAL_DAC_SELECT 1 +#define SBE_2T3E3_CPLD_VAL_LOOP_TIMING_SOURCE 2 +#define SBE_2T3E3_CPLD_VAL_LIU_FRAMER_RESET 3 + +/* PCRA */ +#define SBE_2T3E3_CPLD_VAL_CRC32 0x40 +#define SBE_2T3E3_CPLD_VAL_TRANSPARENT_MODE 0x20 +#define SBE_2T3E3_CPLD_VAL_REAR_PANEL 0x10 +#define SBE_2T3E3_CPLD_VAL_RAW_MODE 0x08 +#define SBE_2T3E3_CPLD_VAL_ALT 0x04 +#define SBE_2T3E3_CPLD_VAL_LOOP_TIMING 0x02 +#define SBE_2T3E3_CPLD_VAL_LOCAL_CLOCK_E3 0x01 + +/* PCRB */ +#define SBE_2T3E3_CPLD_VAL_PAD_COUNT 0x30 +#define SBE_2T3E3_CPLD_VAL_PAD_COUNT_1 0x00 +#define SBE_2T3E3_CPLD_VAL_PAD_COUNT_2 0x10 +#define SBE_2T3E3_CPLD_VAL_PAD_COUNT_3 0x20 +#define SBE_2T3E3_CPLD_VAL_PAD_COUNT_4 0x30 +#define SBE_2T3E3_CPLD_VAL_SCRAMBLER_TYPE 0x02 +#define SBE_2T3E3_CPLD_VAL_SCRAMBLER_ENABLE 0x01 + +/* PCRC */ +#define SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_NONE 0x00 +#define SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_0 0x01 +#define SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_1 0x11 +#define SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_2 0x21 + +/* PLTR */ +#define SBE_2T3E3_CPLD_VAL_LCV_COUNTER 0xff + +/* SCSR */ +#define SBE_2T3E3_CPLD_VAL_EEPROM_SELECT 0x10 + +/* PICSR */ +#define SBE_2T3E3_CPLD_VAL_LOSS_OF_SIGNAL_THRESHOLD_LEVEL_1 0x80 +#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_CHANGE 0x40 +#define SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_ETHERNET_ASSERTED 0x20 +#define SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_FRAMER_ASSERTED 0x10 +#define SBE_2T3E3_CPLD_VAL_LCV_LIMIT_EXCEEDED 0x08 +#define SBE_2T3E3_CPLD_VAL_DMO_SIGNAL_DETECTED 0x04 +#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_LOCK_DETECTED 0x02 +#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_DETECTED 0x01 + +/* PIER */ +#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOS_CHANGE_ENABLE 0x40 +#define SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_ETHERNET_ENABLE 0x20 +#define SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_FRAMER_ENABLE 0x10 +#define SBE_2T3E3_CPLD_VAL_LCV_INTERRUPT_ENABLE 0x08 +#define SBE_2T3E3_CPLD_VAL_DMO_ENABLE 0x04 +#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_LOCK_ENABLE 0x02 +#define SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_ENABLE 0x01 + +/************************************************************** + * Framer + **************************************************************/ + +/* reg_map indexes */ +/* common */ +#define SBE_2T3E3_FRAMER_REG_OPERATING_MODE 0 +#define SBE_2T3E3_FRAMER_REG_IO_CONTROL 1 +#define SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_ENABLE 2 +#define SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_STATUS 3 +#define SBE_2T3E3_FRAMER_REG_PMON_LCV_EVENT_COUNT_MSB 28 +#define SBE_2T3E3_FRAMER_REG_PMON_LCV_EVENT_COUNT_LSB 29 +#define SBE_2T3E3_FRAMER_REG_PMON_FRAMING_BIT_ERROR_EVENT_COUNT_MSB 30 +#define SBE_2T3E3_FRAMER_REG_PMON_FRAMING_BIT_ERROR_EVENT_COUNT_LSB 31 +#define SBE_2T3E3_FRAMER_REG_PMON_PARITY_ERROR_EVENT_COUNT_MSB 32 +#define SBE_2T3E3_FRAMER_REG_PMON_PARITY_ERROR_EVENT_COUNT_LSB 33 +#define SBE_2T3E3_FRAMER_REG_PMON_FEBE_EVENT_COUNT_MSB 34 +#define SBE_2T3E3_FRAMER_REG_PMON_FEBE_EVENT_COUNT_LSB 35 +#define SBE_2T3E3_FRAMER_REG_PMON_CP_BIT_ERROR_EVENT_COUNT_MSB 36 +#define SBE_2T3E3_FRAMER_REG_PMON_CP_BIT_ERROR_EVENT_COUNT_LSB 37 +#define SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER 38 +#define SBE_2T3E3_FRAMER_REG_ONE_SECOND_ERROR_STATUS 39 +#define SBE_2T3E3_FRAMER_REG_LCV_ONE_SECOND_ACCUMULATOR_MSB 40 +#define SBE_2T3E3_FRAMER_REG_LCV_ONE_SECOND_ACCUMULATOR_LSB 41 +#define SBE_2T3E3_FRAMER_REG_FRAME_PARITY_ERROR_ONE_SECOND_ACCUMULATOR_MSB 42 +#define SBE_2T3E3_FRAMER_REG_FRAME_PARITY_ERROR_ONE_SECOND_ACCUMULATOR_LSB 43 +#define SBE_2T3E3_FRAMER_REG_FRAME_CP_BIT_ERROR_ONE_SECOND_ACCUMULATOR_MSB 44 +#define SBE_2T3E3_FRAMER_REG_FRAME_CP_BIT_ERROR_ONE_SECOND_ACCUMULATOR_LSB 45 +#define SBE_2T3E3_FRAMER_REG_LINE_INTERFACE_DRIVE 46 +#define SBE_2T3E3_FRAMER_REG_LINE_INTERFACE_SCAN 47 + +/* T3 */ +#define SBE_2T3E3_FRAMER_REG_T3_RX_CONFIGURATION_STATUS 4 +#define SBE_2T3E3_FRAMER_REG_T3_RX_STATUS 5 +#define SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_ENABLE 6 +#define SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_STATUS 7 +#define SBE_2T3E3_FRAMER_REG_T3_RX_SYNC_DETECT_ENABLE 8 +#define SBE_2T3E3_FRAMER_REG_T3_RX_FEAC 10 +#define SBE_2T3E3_FRAMER_REG_T3_RX_FEAC_INTERRUPT_ENABLE_STATUS 11 +#define SBE_2T3E3_FRAMER_REG_T3_RX_LAPD_CONTROL 12 +#define SBE_2T3E3_FRAMER_REG_T3_RX_LAPD_STATUS 13 +#define SBE_2T3E3_FRAMER_REG_T3_TX_CONFIGURATION 16 +#define SBE_2T3E3_FRAMER_REG_T3_TX_FEAC_CONFIGURATION_STATUS 17 +#define SBE_2T3E3_FRAMER_REG_T3_TX_FEAC 18 +#define SBE_2T3E3_FRAMER_REG_T3_TX_LAPD_CONFIGURATION 19 +#define SBE_2T3E3_FRAMER_REG_T3_TX_LAPD_STATUS 20 +#define SBE_2T3E3_FRAMER_REG_T3_TX_MBIT_MASK 21 +#define SBE_2T3E3_FRAMER_REG_T3_TX_FBIT_MASK 22 +#define SBE_2T3E3_FRAMER_REG_T3_TX_FBIT_MASK_2 23 +#define SBE_2T3E3_FRAMER_REG_T3_TX_FBIT_MASK_3 24 + +/* E3 */ +#define SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_1 4 +#define SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_2 5 +#define SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_1 6 +#define SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_2 7 +#define SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_1 8 +#define SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_2 9 +#define SBE_2T3E3_FRAMER_REG_E3_RX_LAPD_CONTROL 12 +#define SBE_2T3E3_FRAMER_REG_E3_RX_LAPD_STATUS 13 +#define SBE_2T3E3_FRAMER_REG_E3_RX_NR_BYTE 14 +#define SBE_2T3E3_FRAMER_REG_E3_RX_SERVICE_BITS 14 +#define SBE_2T3E3_FRAMER_REG_E3_RX_GC_BYTE 15 +#define SBE_2T3E3_FRAMER_REG_E3_TX_CONFIGURATION 16 +#define SBE_2T3E3_FRAMER_REG_E3_TX_LAPD_CONFIGURATION 19 +#define SBE_2T3E3_FRAMER_REG_E3_TX_LAPD_STATUS 19 +#define SBE_2T3E3_FRAMER_REG_E3_TX_GC_BYTE 21 +#define SBE_2T3E3_FRAMER_REG_E3_TX_SERVICE_BITS 21 +#define SBE_2T3E3_FRAMER_REG_E3_TX_MA_BYTE 22 +#define SBE_2T3E3_FRAMER_REG_E3_TX_NR_BYTE 23 +#define SBE_2T3E3_FRAMER_REG_E3_TX_FA1_ERROR_MASK 25 +#define SBE_2T3E3_FRAMER_REG_E3_TX_FAS_ERROR_MASK_UPPER 25 +#define SBE_2T3E3_FRAMER_REG_E3_TX_FA2_ERROR_MASK 26 +#define SBE_2T3E3_FRAMER_REG_E3_TX_FAS_ERROR_MASK_LOWER 26 +#define SBE_2T3E3_FRAMER_REG_E3_TX_BIP8_MASK 27 +#define SBE_2T3E3_FRAMER_REG_E3_TX_BIP4_MASK 27 + +#define SBE_2T3E3_FRAMER_REG_MAX 48 + +/**********/ + +/* OPERATING_MODE */ +#define SBE_2T3E3_FRAMER_VAL_LOCAL_LOOPBACK_MODE 0x80 +#define SBE_2T3E3_FRAMER_VAL_T3_E3_SELECT 0x40 +#define SBE_2T3E3_FRAMER_VAL_INTERNAL_LOS_ENABLE 0x20 +#define SBE_2T3E3_FRAMER_VAL_RESET 0x10 +#define SBE_2T3E3_FRAMER_VAL_INTERRUPT_ENABLE_RESET 0x08 +#define SBE_2T3E3_FRAMER_VAL_FRAME_FORMAT_SELECT 0x04 +#define SBE_2T3E3_FRAMER_VAL_TIMING_ASYNCH_TXINCLK 0x03 +#define SBE_2T3E3_FRAMER_VAL_E3_G751 0x00 +#define SBE_2T3E3_FRAMER_VAL_E3_G832 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_CBIT 0x40 +#define SBE_2T3E3_FRAMER_VAL_T3_M13 0x44 +#define SBE_2T3E3_FRAMER_VAL_LOOPBACK_ON 0x80 +#define SBE_2T3E3_FRAMER_VAL_LOOPBACK_OFF 0x00 + +/* IO_CONTROL */ +#define SBE_2T3E3_FRAMER_VAL_DISABLE_TX_LOSS_OF_CLOCK 0x80 +#define SBE_2T3E3_FRAMER_VAL_LOSS_OF_CLOCK_STATUS 0x40 +#define SBE_2T3E3_FRAMER_VAL_DISABLE_RX_LOSS_OF_CLOCK 0x20 +#define SBE_2T3E3_FRAMER_VAL_AMI_LINE_CODE 0x10 +#define SBE_2T3E3_FRAMER_VAL_UNIPOLAR 0x08 +#define SBE_2T3E3_FRAMER_VAL_TX_LINE_CLOCK_INVERT 0x04 +#define SBE_2T3E3_FRAMER_VAL_RX_LINE_CLOCK_INVERT 0x02 +#define SBE_2T3E3_FRAMER_VAL_REFRAME 0x01 + +/* BLOCK_INTERRUPT_ENABLE */ +#define SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_ENABLE 0x80 +#define SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_ONE_SECOND_INTERRUPT_ENABLE 0x01 + +/* BLOCK_INTERRUPT_STATUS */ +#define SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_STATUS 0x80 +#define SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_STATUS 0x02 +#define SBE_2T3E3_FRAMER_VAL_ONE_SECOND_INTERRUPT_STATUS 0x01 + +/**********/ + +/* T3_RX_CONFIGURATION_STATUS */ +#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIS 0x80 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_LOS 0x40 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE 0x20 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_OOF 0x10 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FRAMING_ON_PARITY 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_F_SYNC_ALGO 0x02 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_M_SYNC_ALGO 0x01 + +/* T3_RX_STATUS */ +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FERF 0x10 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIC 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEBE 0x07 + +/* T3_RX_INTERRUPT_ENABLE */ +#define SBE_2T3E3_FRAMER_VAL_T3_RX_CP_BIT_ERROR_INTERRUPT_ENABLE 0x80 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_ENABLE 0x40 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIS_INTERRUPT_ENABLE 0x20 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE_INTERRUPT_ENABLE 0x10 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FERF_INTERRUPT_ENABLE 0x08 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIC_INTERRUPT_ENABLE 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_P_BIT_INTERRUPT_ENABLE 0x01 + +/* T3_RX_INTERRUPT_STATUS */ +#define SBE_2T3E3_FRAMER_VAL_T3_RX_CP_BIT_ERROR_INTERRUPT_STATUS 0x80 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_STATUS 0x40 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIS_INTERRUPT_STATUS 0x20 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE_INTERRUPT_STATUS 0x10 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FERF_INTERRUPT_STATUS 0x08 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_AIC_INTERRUPT_STATUS 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_STATUS 0x02 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_P_BIT_INTERRUPT_STATUS 0x01 + +/* T3_RX_FEAC_INTERRUPT_ENABLE_STATUS */ +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_VALID 0x10 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_REMOVE_INTERRUPT_ENABLE 0x08 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_REMOVE_INTERRUPT_STATUS 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_VALID_INTERRUPT_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_VALID_INTERRUPT_STATUS 0x01 + +/* T3_RX_LAPD_CONTROL */ +#define SBE_2T3E3_FRAMER_VAL_T3_RX_LAPD_ENABLE 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_LAPD_INTERRUPT_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_LAPD_INTERRUPT_STATUS 0x01 + +/* T3_RX_LAPD_STATUS */ +#define SBE_2T3E3_FRAMER_VAL_T3_RX_ABORT 0x40 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_LAPD_TYPE 0x30 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_CR_TYPE 0x08 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FCS_ERROR 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_END_OF_MESSAGE 0x02 +#define SBE_2T3E3_FRAMER_VAL_T3_RX_FLAG_PRESENT 0x01 + +/* T3_TX_CONFIGURATION */ +#define SBE_2T3E3_FRAMER_VAL_T3_TX_YELLOW_ALARM 0x80 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_X_BIT 0x40 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_IDLE 0x20 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_AIS 0x10 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_LOS 0x08 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_FERF_ON_LOS 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_FERF_ON_OOF 0x02 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_FERF_ON_AIS 0x01 + +/* T3_TX_FEAC_CONFIGURATION_STATUS */ +#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_INTERRUPT_ENABLE 0x10 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_INTERRUPT_STATUS 0x08 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_ENABLE 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_GO 0x02 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_FEAC_BUSY 0x01 + +/* T3_TX_LAPD_STATUS */ +#define SBE_2T3E3_FRAMER_VAL_T3_TX_DL_START 0x08 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_DL_BUSY 0x04 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_LAPD_INTERRUPT_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_T3_TX_LAPD_INTERRUPT_STATUS 0x01 + +/**********/ + +/* E3_RX_CONFIGURATION_STATUS_1 */ +#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_TYPE 0xe0 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FERF_ALGO 0x10 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_T_MARK_ALGO 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_EXPECTED 0x07 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP4 0x01 + +/* E3_RX_CONFIGURATION_STATUS_2 */ +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOF_ALGO 0x80 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOF 0x40 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_OOF 0x20 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOS 0x10 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_AIS 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_UNSTABLE 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_T_MARK 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FERF 0x01 + +/* E3_RX_INTERRUPT_ENABLE_1 */ +#define SBE_2T3E3_FRAMER_VAL_E3_RX_COFA_INTERRUPT_ENABLE 0x10 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_ENABLE 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOF_INTERRUPT_ENABLE 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_AIS_INTERRUPT_ENABLE 0x01 + +/* E3_RX_INTERRUPT_ENABLE_2 */ +#define SBE_2T3E3_FRAMER_VAL_E3_RX_TTB_CHANGE_INTERRUPT_ENABLE 0x40 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FEBE_INTERRUPT_ENABLE 0x10 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FERF_INTERRUPT_ENABLE 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP8_ERROR_INTERRUPT_ENABLE 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP4_ERROR_INTERRUPT_ENABLE 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FRAMING_BYTE_ERROR_INTERRUPT_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_MISMATCH_INTERRUPT_ENABLE 0x01 + +/* E3_RX_INTERRUPT_STATUS_1 */ +#define SBE_2T3E3_FRAMER_VAL_E3_RX_COFA_INTERRUPT_STATUS 0x10 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_STATUS 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOF_INTERRUPT_STATUS 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_STATUS 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_AIS_INTERRUPT_STATUS 0x01 + +/* E3_RX_INTERRUPT_STATUS_2 */ +#define SBE_2T3E3_FRAMER_VAL_E3_RX_TTB_CHANGE_INTERRUPT_STATUS 0x40 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FEBE_INTERRUPT_STATUS 0x10 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FERF_INTERRUPT_STATUS 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP8_ERROR_INTERRUPT_STATUS 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_BIP4_ERROR_INTERRUPT_STATUS 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FRAMING_BYTE_ERROR_INTERRUPT_STATUS 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_PAYLOAD_MISMATCH_INTERRUPT_STATUS 0x01 + +/* E3_RX_LAPD_CONTROL */ +#define SBE_2T3E3_FRAMER_VAL_E3_RX_DL_FROM_NR 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LAPD_ENABLE 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LAPD_INTERRUPT_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LAPD_INTERRUPT_STATUS 0x01 + +/* E3_RX_LAPD_STATUS */ +#define SBE_2T3E3_FRAMER_VAL_E3_RX_ABORT 0x40 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_LAPD_TYPE 0x30 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_CR_TYPE 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FCS_ERROR 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_END_OF_MESSAGE 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_RX_FLAG_PRESENT 0x01 + +/* E3_TX_CONFIGURATION */ +#define SBE_2T3E3_FRAMER_VAL_E3_TX_BIP4_ENABLE 0x80 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_A_SOURCE_SELECT 0x60 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_DL_IN_NR 0x10 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_N_SOURCE_SELECT 0x18 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_AIS_ENABLE 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_LOS_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_MA_RX 0x01 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_FAS_SOURCE_SELECT 0x01 + +/* E3_TX_LAPD_CONFIGURATION */ +#define SBE_2T3E3_FRAMER_VAL_E3_TX_AUTO_RETRANSMIT 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_LAPD_MESSAGE_LENGTH 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_LAPD_ENABLE 0x01 + +/* E3_TX_LAPD_STATUS_INTERRUPT */ +#define SBE_2T3E3_FRAMER_VAL_E3_TX_DL_START 0x08 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_DL_BUSY 0x04 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_LAPD_INTERRUPT_ENABLE 0x02 +#define SBE_2T3E3_FRAMER_VAL_E3_TX_LAPD_INTERRUPT_STATUS 0x01 + + + + + + +/************************************************************** + * LIU + **************************************************************/ + +/* reg_map indexes */ +#define SBE_2T3E3_LIU_REG_REG0 0 +#define SBE_2T3E3_LIU_REG_REG1 1 +#define SBE_2T3E3_LIU_REG_REG2 2 +#define SBE_2T3E3_LIU_REG_REG3 3 +#define SBE_2T3E3_LIU_REG_REG4 4 + +#define SBE_2T3E3_LIU_REG_MAX 5 + +/**********/ + +/* REG0 */ +#define SBE_2T3E3_LIU_VAL_RECEIVE_LOSS_OF_LOCK_STATUS 0x10 +#define SBE_2T3E3_LIU_VAL_RECEIVE_LOSS_OF_SIGNAL_STATUS 0x08 +#define SBE_2T3E3_LIU_VAL_ANALOG_LOSS_OF_SIGNAL_STATUS 0x04 +#define SBE_2T3E3_LIU_VAL_DIGITAL_LOSS_OF_SIGNAL_STATUS 0x02 +#define SBE_2T3E3_LIU_VAL_DMO_STATUS 0x01 + +/* REG1 */ +#define SBE_2T3E3_LIU_VAL_TRANSMITTER_OFF 0x10 +#define SBE_2T3E3_LIU_VAL_TRANSMIT_ALL_ONES 0x08 +#define SBE_2T3E3_LIU_VAL_TRANSMIT_CLOCK_INVERT 0x04 +#define SBE_2T3E3_LIU_VAL_TRANSMIT_LEVEL_SELECT 0x02 +#define SBE_2T3E3_LIU_VAL_TRANSMIT_BINARY_DATA 0x01 + +/* REG2 */ +#define SBE_2T3E3_LIU_VAL_DECODER_DISABLE 0x10 +#define SBE_2T3E3_LIU_VAL_ENCODER_DISABLE 0x08 +#define SBE_2T3E3_LIU_VAL_ANALOG_LOSS_OF_SIGNAL_DISABLE 0x04 +#define SBE_2T3E3_LIU_VAL_DIGITAL_LOSS_OF_SIGNAL_DISABLE 0x02 +#define SBE_2T3E3_LIU_VAL_RECEIVE_EQUALIZATION_DISABLE 0x01 + +/* REG3 */ +#define SBE_2T3E3_LIU_VAL_RECEIVE_BINARY_DATA 0x10 +#define SBE_2T3E3_LIU_VAL_RECOVERED_DATA_MUTING 0x08 +#define SBE_2T3E3_LIU_VAL_RECEIVE_CLOCK_OUTPUT_2 0x04 +#define SBE_2T3E3_LIU_VAL_INVERT_RECEIVE_CLOCK_2 0x02 +#define SBE_2T3E3_LIU_VAL_INVERT_RECEIVE_CLOCK_1 0x01 + +/* REG4 */ +#define SBE_2T3E3_LIU_VAL_T3_MODE_SELECT 0x00 +#define SBE_2T3E3_LIU_VAL_E3_MODE_SELECT 0x04 +#define SBE_2T3E3_LIU_VAL_LOCAL_LOOPBACK 0x02 +#define SBE_2T3E3_LIU_VAL_REMOTE_LOOPBACK 0x01 +#define SBE_2T3E3_LIU_VAL_LOOPBACK_OFF 0x00 +#define SBE_2T3E3_LIU_VAL_LOOPBACK_REMOTE 0x01 +#define SBE_2T3E3_LIU_VAL_LOOPBACK_ANALOG 0x02 +#define SBE_2T3E3_LIU_VAL_LOOPBACK_DIGITAL 0x03 + +/********************************************************************** + * + * descriptor list and data buffer + * + **********************************************************************/ +typedef struct { + u32 rdes0; + u32 rdes1; + u32 rdes2; + u32 rdes3; +} t3e3_rx_desc_t; + +#define SBE_2T3E3_RX_DESC_RING_SIZE 64 + +/* RDES0 */ +#define SBE_2T3E3_RX_DESC_21143_OWN 0X80000000 +#define SBE_2T3E3_RX_DESC_FRAME_LENGTH 0x3fff0000 +#define SBE_2T3E3_RX_DESC_FRAME_LENGTH_SHIFT 16 +#define SBE_2T3E3_RX_DESC_ERROR_SUMMARY 0x00008000 +#define SBE_2T3E3_RX_DESC_DESC_ERROR 0x00004000 +#define SBE_2T3E3_RX_DESC_DATA_TYPE 0x00003000 +#define SBE_2T3E3_RX_DESC_RUNT_FRAME 0x00000800 +#define SBE_2T3E3_RX_DESC_FIRST_DESC 0x00000200 +#define SBE_2T3E3_RX_DESC_LAST_DESC 0x00000100 +#define SBE_2T3E3_RX_DESC_FRAME_TOO_LONG 0x00000080 +#define SBE_2T3E3_RX_DESC_COLLISION_SEEN 0x00000040 +#define SBE_2T3E3_RX_DESC_FRAME_TYPE 0x00000020 +#define SBE_2T3E3_RX_DESC_RECEIVE_WATCHDOG 0x00000010 +#define SBE_2T3E3_RX_DESC_MII_ERROR 0x00000008 +#define SBE_2T3E3_RX_DESC_DRIBBLING_BIT 0x00000004 +#define SBE_2T3E3_RX_DESC_CRC_ERROR 0x00000002 + +/* RDES1 */ +#define SBE_2T3E3_RX_DESC_END_OF_RING 0x02000000 +#define SBE_2T3E3_RX_DESC_SECOND_ADDRESS_CHAINED 0x01000000 +#define SBE_2T3E3_RX_DESC_BUFFER_2_SIZE 0x003ff800 +#define SBE_2T3E3_RX_DESC_BUFFER_1_SIZE 0x000007ff + +/*********************/ + +typedef struct { + u32 tdes0; + u32 tdes1; + u32 tdes2; + u32 tdes3; +} t3e3_tx_desc_t; + +#define SBE_2T3E3_TX_DESC_RING_SIZE 256 + +/* TDES0 */ +#define SBE_2T3E3_TX_DESC_21143_OWN 0x80000000 +#define SBE_2T3E3_TX_DESC_ERROR_SUMMARY 0x00008000 +#define SBE_2T3E3_TX_DESC_TRANSMIT_JABBER_TIMEOUT 0x00004000 +#define SBE_2T3E3_TX_DESC_LOSS_OF_CARRIER 0x00000800 +#define SBE_2T3E3_TX_DESC_NO_CARRIER 0x00000400 +#define SBE_2T3E3_TX_DESC_LINK_FAIL_REPORT 0x00000004 +#define SBE_2T3E3_TX_DESC_UNDERFLOW_ERROR 0x00000002 +#define SBE_2T3E3_TX_DESC_DEFFERED 0x00000001 + +/* TDES1 */ +#define SBE_2T3E3_TX_DESC_INTERRUPT_ON_COMPLETION 0x80000000 +#define SBE_2T3E3_TX_DESC_LAST_SEGMENT 0x40000000 +#define SBE_2T3E3_TX_DESC_FIRST_SEGMENT 0x20000000 +#define SBE_2T3E3_TX_DESC_CRC_DISABLE 0x04000000 +#define SBE_2T3E3_TX_DESC_END_OF_RING 0x02000000 +#define SBE_2T3E3_TX_DESC_SECOND_ADDRESS_CHAINED 0x01000000 +#define SBE_2T3E3_TX_DESC_DISABLE_PADDING 0x00800000 +#define SBE_2T3E3_TX_DESC_BUFFER_2_SIZE 0x003ff800 +#define SBE_2T3E3_TX_DESC_BUFFER_1_SIZE 0x000007ff + + +#define SBE_2T3E3_MTU 1600 +#define SBE_2T3E3_CRC16_LENGTH 2 +#define SBE_2T3E3_CRC32_LENGTH 4 + +#define MCLBYTES (SBE_2T3E3_MTU + 128) + +struct channel { + struct pci_dev *pdev; + struct net_device *dev; + struct card *card; + unsigned long addr; /* DECchip */ + + int leds; + + /* pci specific */ + struct { + u32 slot; /* should be 0 or 1 */ + u32 command; + u8 cache_size; + } h; + + /* statistics */ + t3e3_stats_t s; + + /* running */ + struct { + u32 flags; + } r; + + /* parameters */ + t3e3_param_t p; + + u32 liu_regs[SBE_2T3E3_LIU_REG_MAX]; /* LIU registers */ + u32 framer_regs[SBE_2T3E3_FRAMER_REG_MAX]; /* Framer registers */ + + /* Ethernet Controller */ + struct { + u_int16_t card_serial_number[3]; + + u32 reg[SBE_2T3E3_21143_REG_MAX]; /* registers i.e. CSR */ + + u32 interrupt_enable_mask; + + /* receive chain/ring */ + t3e3_rx_desc_t *rx_ring; + struct sk_buff *rx_data[SBE_2T3E3_RX_DESC_RING_SIZE]; + u32 rx_ring_current_read; + + /* transmit chain/ring */ + t3e3_tx_desc_t *tx_ring; + struct sk_buff *tx_data[SBE_2T3E3_TX_DESC_RING_SIZE]; + u32 tx_ring_current_read; + u32 tx_ring_current_write; + int tx_full; + int tx_free_cnt; + spinlock_t tx_lock; + } ether; + + int32_t interrupt_active; + int32_t rcv_count; +}; + +struct card { + spinlock_t bootrom_lock; + unsigned long bootrom_addr; + struct timer_list timer; /* for updating LEDs */ + struct channel channels[0]; +}; + +#define SBE_2T3E3_FLAG_NETWORK_UP 0x00000001 +#define SBE_2T3E3_FLAG_NO_ERROR_MESSAGES 0x00000002 + +extern const u32 cpld_reg_map[][2]; +extern const u32 cpld_val_map[][2]; +extern const u32 t3e3_framer_reg_map[]; +extern const u32 t3e3_liu_reg_map[]; + +void t3e3_init(struct channel *); +void t3e3_if_up(struct channel *); +void t3e3_if_down(struct channel *); +int t3e3_if_start_xmit(struct sk_buff *skb, struct net_device *dev); +void t3e3_if_config(struct channel *, u32, char *, + t3e3_resp_t *, int *); +void t3e3_set_frame_type(struct channel *, u32); +u32 t3e3_eeprom_read_word(struct channel *, u32); +void t3e3_read_card_serial_number(struct channel *); + +/* interrupt handlers */ +irqreturn_t t3e3_intr(int irq, void *dev_instance); +void dc_intr(struct channel *); +void dc_intr_rx(struct channel *); +void dc_intr_tx(struct channel *); +void dc_intr_tx_underflow(struct channel *); +void exar7250_intr(struct channel *); +void exar7250_E3_intr(struct channel *, u32); +void exar7250_T3_intr(struct channel *, u32); + +/* Ethernet controller */ +u32 bootrom_read(struct channel *, u32); +void bootrom_write(struct channel *, u32, u32); +void dc_init(struct channel *); +void dc_start(struct channel *); +void dc_stop(struct channel *); +void dc_start_intr(struct channel *); +void dc_stop_intr(struct channel *); +void dc_reset(struct channel *); +void dc_restart(struct channel *); +void dc_receiver_onoff(struct channel *, u32); +void dc_transmitter_onoff(struct channel *, u32); +void dc_set_loopback(struct channel *, u32); +u32 dc_init_descriptor_list(struct channel *); +void dc_clear_descriptor_list(struct channel *); +void dc_drop_descriptor_list(struct channel *); +void dc_set_output_port(struct channel *); +void t3e3_sc_init(struct channel *); + +/* CPLD */ +void cpld_init(struct channel *sc); +u32 cpld_read(struct channel *sc, u32 reg); +void cpld_set_crc(struct channel *, u32); +void cpld_start_intr(struct channel *); +void cpld_stop_intr(struct channel *); +#if 0 +void cpld_led_onoff(struct channel *, u32, u32, u32, u32); +#endif +void cpld_set_clock(struct channel *sc, u32 mode); +void cpld_set_scrambler(struct channel *, u32); +void cpld_select_panel(struct channel *, u32); +void cpld_set_frame_mode(struct channel *, u32); +void cpld_set_frame_type(struct channel *, u32); +void cpld_set_pad_count(struct channel *, u32); +void cpld_set_fractional_mode(struct channel *, u32, u32, u32); +void cpld_LOS_update(struct channel *); + +/* Framer */ +extern u32 exar7250_read(struct channel *, u32); +extern void exar7250_write(struct channel *, u32, u32); +void exar7250_init(struct channel *); +void exar7250_start_intr(struct channel *, u32); +void exar7250_stop_intr(struct channel *, u32); +void exar7250_set_frame_type(struct channel *, u32); +void exar7250_set_loopback(struct channel *, u32); +void exar7250_unipolar_onoff(struct channel *, u32); + +/* LIU */ +u32 exar7300_read(struct channel *, u32); +void exar7300_write(struct channel *, u32, u32); +void exar7300_init(struct channel *); +void exar7300_line_build_out_onoff(struct channel *, u32); +void exar7300_set_frame_type(struct channel *, u32); +void exar7300_set_loopback(struct channel *, u32); +void exar7300_transmit_all_ones_onoff(struct channel *, u32); +void exar7300_receive_equalization_onoff(struct channel *, u32); +void exar7300_unipolar_onoff(struct channel *, u32); + +void update_led(struct channel *, int); +int setup_device(struct net_device *dev, struct channel *sc); + +static inline int has_two_ports(struct pci_dev *pdev) +{ + return pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P0; +} + +#define dev_to_priv(dev) (*(struct channel **) ((hdlc_device*)(dev) + 1)) + +static inline u32 dc_read(unsigned long addr, u32 reg) +{ + return inl(addr + (reg << 3)); +} + +static inline void dc_write(unsigned long addr, u32 reg, u32 val) +{ + outl(val, addr + (reg << 3)); +} + +static inline void dc_set_bits(unsigned long addr, u32 reg, u32 bits) +{ + dc_write(addr, reg, dc_read(addr, reg) | bits); +} + +static inline void dc_clear_bits(unsigned long addr, u32 reg, u32 bits) +{ + dc_write(addr, reg, dc_read(addr, reg) & ~bits); +} + +#define CPLD_MAP_REG(reg, sc) (cpld_reg_map[(reg)][(sc)->h.slot]) + +static inline void cpld_write(struct channel *channel, unsigned reg, u32 val) +{ + unsigned long flags; + spin_lock_irqsave(&channel->card->bootrom_lock, flags); + bootrom_write(channel, CPLD_MAP_REG(reg, channel), val); + spin_unlock_irqrestore(&channel->card->bootrom_lock, flags); +} + +#define exar7250_set_bit(sc, reg, bit) \ + exar7250_write((sc), (reg), \ + exar7250_read(sc, reg) | (bit)) + +#define exar7250_clear_bit(sc, reg, bit) \ + exar7250_write((sc), (reg), \ + exar7250_read(sc, reg) & ~(bit)) + +#define exar7300_set_bit(sc, reg, bit) \ + exar7300_write((sc), (reg), \ + exar7300_read(sc, reg) | (bit)) + +#define exar7300_clear_bit(sc, reg, bit) \ + exar7300_write((sc), (reg), \ + exar7300_read(sc, reg) & ~(bit)) + + +#endif /* T3E3_H */ diff --git a/drivers/staging/sbe-2t3e3/Kconfig b/drivers/staging/sbe-2t3e3/Kconfig new file mode 100644 index 000000000000..8ec86cfc6bf8 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/Kconfig @@ -0,0 +1,13 @@ +config SBE_2T3E3 + tristate "SBE wanPMC-2T3E3 support" + depends on HDLC && PCI + help + Driver for wanPMC-2T3E3 cards by SBE Inc. + + If you have such a card, say Y here and see + . + + To compile this as a module, choose M here: the + module will be called sbe-2t3e3. + + If unsure, say N. diff --git a/drivers/staging/sbe-2t3e3/Makefile b/drivers/staging/sbe-2t3e3/Makefile new file mode 100644 index 000000000000..2c7b0978b478 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_SBE_2T3E3) += sbe-2t3e3.o + +sbe-2t3e3-objs := module.o netdev.o maps.o \ + main.o cpld.o intr.o ctrl.o io.o dc.o exar7250.o exar7300.o diff --git a/drivers/staging/sbe-2t3e3/TODO b/drivers/staging/sbe-2t3e3/TODO new file mode 100644 index 000000000000..624b20f70cf8 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/TODO @@ -0,0 +1,6 @@ +TODO: + - additional cleaning and tests + - wait for the new configuration interface in generic HDLC layer and + when available, convert the driver to it + +Please send patches to Krzysztof Halasa . \ No newline at end of file diff --git a/drivers/staging/sbe-2t3e3/cpld.c b/drivers/staging/sbe-2t3e3/cpld.c new file mode 100644 index 000000000000..b0fc2ddad329 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/cpld.c @@ -0,0 +1,366 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include +#include "2t3e3.h" +#include "ctrl.h" + +#define bootrom_set_bit(sc, reg, bit) \ + bootrom_write((sc), (reg), \ + bootrom_read((sc), (reg)) | (bit)) + +#define bootrom_clear_bit(sc, reg, bit) \ + bootrom_write((sc), (reg), \ + bootrom_read((sc), (reg)) & ~(bit)) + +static inline void cpld_set_bit(struct channel *channel, unsigned reg, u32 bit) +{ + unsigned long flags; + spin_lock_irqsave(&channel->card->bootrom_lock, flags); + bootrom_set_bit(channel, CPLD_MAP_REG(reg, channel), bit); + spin_unlock_irqrestore(&channel->card->bootrom_lock, flags); +} + +static inline void cpld_clear_bit(struct channel *channel, unsigned reg, u32 bit) +{ + unsigned long flags; + spin_lock_irqsave(&channel->card->bootrom_lock, flags); + bootrom_clear_bit(channel, CPLD_MAP_REG(reg, channel), bit); + spin_unlock_irqrestore(&channel->card->bootrom_lock, flags); +} + +void cpld_init(struct channel *sc) +{ + u32 val; +#if 0 + /* reset LIU and Framer */ + val = cpld_val_map[SBE_2T3E3_CPLD_VAL_LIU_FRAMER_RESET][sc->h.slot]; + cpld_write(sc, SBE_2T3E3_CPLD_REG_STATIC_RESET, val); + udelay(10000); /* TODO - how long? */ + val = 0; + cpld_write(sc, SBE_2T3E3_CPLD_REG_STATIC_RESET, val); +#endif + + /* PCRA */ + val = SBE_2T3E3_CPLD_VAL_CRC32 | + cpld_val_map[SBE_2T3E3_CPLD_VAL_LOOP_TIMING_SOURCE][sc->h.slot]; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PCRA, val); + + /* PCRB */ + val = 0; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PCRB, val); + + /* PCRC */ + val = 0; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PCRC, val); + + /* PBWF */ + val = 0; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PBWF, val); + + /* PBWL */ + val = 0; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PBWL, val); + + /* PLTR */ + val = SBE_2T3E3_CPLD_VAL_LCV_COUNTER; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PLTR, val); + udelay(1000); + + /* PLCR */ + val = 0; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PLCR, val); + udelay(1000); + + /* PPFR */ + val = 0x55; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PPFR, val); + /* TODO: this doesn't work!!! */ + + /* SERIAL_CHIP_SELECT */ + val = 0; + cpld_write(sc, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, val); + + /* PICSR */ + val = SBE_2T3E3_CPLD_VAL_DMO_SIGNAL_DETECTED | + SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_LOCK_DETECTED | + SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_DETECTED; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PICSR, val); + + cpld_start_intr(sc); + + udelay(1000); +} + +void cpld_start_intr(struct channel *sc) +{ + u32 val; + + /* PIER */ + val = SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_ETHERNET_ENABLE | + SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_FRAMER_ENABLE; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PIER, val); +#if 0 + /* + do you want to hang up your computer? + ENABLE REST OF INTERRUPTS !!! + you have been warned :). + */ +#endif +} + +void cpld_stop_intr(struct channel *sc) +{ + u32 val; + + /* PIER */ + val = 0; + cpld_write(sc, SBE_2T3E3_CPLD_REG_PIER, val); +} + +void cpld_set_frame_mode(struct channel *sc, u32 mode) +{ + if (sc->p.frame_mode == mode) + return; + + switch (mode) { + case SBE_2T3E3_FRAME_MODE_HDLC: + cpld_clear_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_TRANSPARENT_MODE | + SBE_2T3E3_CPLD_VAL_RAW_MODE); + exar7250_unipolar_onoff(sc, SBE_2T3E3_OFF); + exar7300_unipolar_onoff(sc, SBE_2T3E3_OFF); + break; + case SBE_2T3E3_FRAME_MODE_TRANSPARENT: + cpld_clear_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_RAW_MODE); + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_TRANSPARENT_MODE); + exar7250_unipolar_onoff(sc, SBE_2T3E3_OFF); + exar7300_unipolar_onoff(sc, SBE_2T3E3_OFF); + break; + case SBE_2T3E3_FRAME_MODE_RAW: + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_RAW_MODE); + exar7250_unipolar_onoff(sc, SBE_2T3E3_ON); + exar7300_unipolar_onoff(sc, SBE_2T3E3_ON); + break; + default: + return; + } + + sc->p.frame_mode = mode; +} + +/* set rate of the local clock */ +void cpld_set_frame_type(struct channel *sc, u32 type) +{ + switch (type) { + case SBE_2T3E3_FRAME_TYPE_E3_G751: + case SBE_2T3E3_FRAME_TYPE_E3_G832: + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_LOCAL_CLOCK_E3); + break; + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + case SBE_2T3E3_FRAME_TYPE_T3_M13: + cpld_clear_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_LOCAL_CLOCK_E3); + break; + default: + return; + } +} + +void cpld_set_scrambler(struct channel *sc, u32 mode) +{ + if (sc->p.scrambler == mode) + return; + + switch (mode) { + case SBE_2T3E3_SCRAMBLER_OFF: + cpld_clear_bit(sc, SBE_2T3E3_CPLD_REG_PCRB, + SBE_2T3E3_CPLD_VAL_SCRAMBLER_ENABLE); + break; + case SBE_2T3E3_SCRAMBLER_LARSCOM: + cpld_clear_bit(sc, SBE_2T3E3_CPLD_REG_PCRB, + SBE_2T3E3_CPLD_VAL_SCRAMBLER_TYPE); + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRB, + SBE_2T3E3_CPLD_VAL_SCRAMBLER_ENABLE); + break; + case SBE_2T3E3_SCRAMBLER_ADC_KENTROX_DIGITAL: + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRB, + SBE_2T3E3_CPLD_VAL_SCRAMBLER_TYPE); + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRB, + SBE_2T3E3_CPLD_VAL_SCRAMBLER_ENABLE); + break; + default: + return; + } + + sc->p.scrambler = mode; +} + + +void cpld_set_crc(struct channel *sc, u32 crc) +{ + if (sc->p.crc == crc) + return; + + switch (crc) { + case SBE_2T3E3_CRC_16: + cpld_clear_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_CRC32); + break; + case SBE_2T3E3_CRC_32: + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_CRC32); + break; + default: + return; + } + + sc->p.crc = crc; +} + + +void cpld_select_panel(struct channel *sc, u32 panel) +{ + if (sc->p.panel == panel) + return; + switch (panel) { + case SBE_2T3E3_PANEL_FRONT: + cpld_clear_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_REAR_PANEL); + break; + case SBE_2T3E3_PANEL_REAR: + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_REAR_PANEL); + break; + default: + return; + } + + udelay(100); + + sc->p.panel = panel; +} + + +extern void cpld_set_clock(struct channel *sc, u32 mode) +{ + if (sc->p.clock_source == mode) + return; + + switch (mode) { + case SBE_2T3E3_TIMING_LOCAL: + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_ALT); + break; + case SBE_2T3E3_TIMING_LOOP: + cpld_clear_bit(sc, SBE_2T3E3_CPLD_REG_PCRA, + SBE_2T3E3_CPLD_VAL_ALT); + break; + default: + return; + } + + sc->p.clock_source = mode; +} + +void cpld_set_pad_count(struct channel *sc, u32 count) +{ + u32 val; + + if (sc->p.pad_count == count) + return; + + switch (count) { + case SBE_2T3E3_PAD_COUNT_1: + val = SBE_2T3E3_CPLD_VAL_PAD_COUNT_1; + break; + case SBE_2T3E3_PAD_COUNT_2: + val = SBE_2T3E3_CPLD_VAL_PAD_COUNT_2; + break; + case SBE_2T3E3_PAD_COUNT_3: + val = SBE_2T3E3_CPLD_VAL_PAD_COUNT_3; + break; + case SBE_2T3E3_PAD_COUNT_4: + val = SBE_2T3E3_CPLD_VAL_PAD_COUNT_4; + break; + default: + return; + } + + cpld_clear_bit(sc, SBE_2T3E3_CPLD_REG_PCRB, + SBE_2T3E3_CPLD_VAL_PAD_COUNT); + cpld_set_bit(sc, SBE_2T3E3_CPLD_REG_PCRB, val); + sc->p.pad_count = count; +} + +void cpld_LOS_update(struct channel *sc) +{ + u_int8_t los; + + cpld_write(sc, SBE_2T3E3_CPLD_REG_PICSR, + SBE_2T3E3_CPLD_VAL_DMO_SIGNAL_DETECTED | + SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_LOCK_DETECTED | + SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_DETECTED); + los = cpld_read(sc, SBE_2T3E3_CPLD_REG_PICSR) & + SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_DETECTED; + + if (los != sc->s.LOS) + dev_info(&sc->pdev->dev, "SBE 2T3E3: LOS status: %s\n", + los ? "Loss of signal" : "Signal OK"); + sc->s.LOS = los; +} + +void cpld_set_fractional_mode(struct channel *sc, u32 mode, + u32 start, u32 stop) +{ + if (mode == SBE_2T3E3_FRACTIONAL_MODE_NONE) { + start = 0; + stop = 0; + } + + if (sc->p.fractional_mode == mode && sc->p.bandwidth_start == start && + sc->p.bandwidth_stop == stop) + return; + + switch (mode) { + case SBE_2T3E3_FRACTIONAL_MODE_NONE: + cpld_write(sc, SBE_2T3E3_CPLD_REG_PCRC, + SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_NONE); + break; + case SBE_2T3E3_FRACTIONAL_MODE_0: + cpld_write(sc, SBE_2T3E3_CPLD_REG_PCRC, + SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_0); + break; + case SBE_2T3E3_FRACTIONAL_MODE_1: + cpld_write(sc, SBE_2T3E3_CPLD_REG_PCRC, + SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_1); + break; + case SBE_2T3E3_FRACTIONAL_MODE_2: + cpld_write(sc, SBE_2T3E3_CPLD_REG_PCRC, + SBE_2T3E3_CPLD_VAL_FRACTIONAL_MODE_2); + break; + default: + printk(KERN_ERR "wrong mode in set_fractional_mode\n"); + return; + } + + cpld_write(sc, SBE_2T3E3_CPLD_REG_PBWF, start); + cpld_write(sc, SBE_2T3E3_CPLD_REG_PBWL, stop); + + sc->p.fractional_mode = mode; + sc->p.bandwidth_start = start; + sc->p.bandwidth_stop = stop; +} diff --git a/drivers/staging/sbe-2t3e3/ctrl.c b/drivers/staging/sbe-2t3e3/ctrl.c new file mode 100644 index 000000000000..d9dd216e9ae0 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/ctrl.c @@ -0,0 +1,362 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include +#include "2t3e3.h" +#include "ctrl.h" + +void t3e3_set_frame_type(struct channel *sc, u32 mode) +{ + if (sc->p.frame_type == mode) + return; + + if (sc->r.flags & SBE_2T3E3_FLAG_NETWORK_UP) { + dev_err(&sc->pdev->dev, "SBE 2T3E3: changing frame type during active connection\n"); + return; + } + + exar7300_set_frame_type(sc, mode); + exar7250_set_frame_type(sc, mode); + cpld_set_frame_type(sc, mode); + + sc->p.frame_type = mode; +} + +void t3e3_set_loopback(struct channel *sc, u32 mode) +{ + u32 tx, rx; + + if (sc->p.loopback == mode) + return; + + tx = sc->p.transmitter_on; + rx = sc->p.receiver_on; + if (tx == SBE_2T3E3_ON) + dc_transmitter_onoff(sc, SBE_2T3E3_OFF); + if (rx == SBE_2T3E3_ON) + dc_receiver_onoff(sc, SBE_2T3E3_OFF); + + /* stop current loopback if any exists */ + switch (sc->p.loopback) { + case SBE_2T3E3_LOOPBACK_NONE: + break; + case SBE_2T3E3_LOOPBACK_ETHERNET: + dc_set_loopback(sc, SBE_2T3E3_21143_VAL_LOOPBACK_OFF); + break; + case SBE_2T3E3_LOOPBACK_FRAMER: + exar7250_set_loopback(sc, SBE_2T3E3_FRAMER_VAL_LOOPBACK_OFF); + break; + case SBE_2T3E3_LOOPBACK_LIU_DIGITAL: + case SBE_2T3E3_LOOPBACK_LIU_ANALOG: + case SBE_2T3E3_LOOPBACK_LIU_REMOTE: + exar7300_set_loopback(sc, SBE_2T3E3_LIU_VAL_LOOPBACK_OFF); + break; + default: + return; + } + + switch (mode) { + case SBE_2T3E3_LOOPBACK_NONE: + break; + case SBE_2T3E3_LOOPBACK_ETHERNET: + dc_set_loopback(sc, SBE_2T3E3_21143_VAL_LOOPBACK_INTERNAL); + break; + case SBE_2T3E3_LOOPBACK_FRAMER: + exar7250_set_loopback(sc, SBE_2T3E3_FRAMER_VAL_LOOPBACK_ON); + break; + case SBE_2T3E3_LOOPBACK_LIU_DIGITAL: + exar7300_set_loopback(sc, SBE_2T3E3_LIU_VAL_LOOPBACK_DIGITAL); + break; + case SBE_2T3E3_LOOPBACK_LIU_ANALOG: + exar7300_set_loopback(sc, SBE_2T3E3_LIU_VAL_LOOPBACK_ANALOG); + break; + case SBE_2T3E3_LOOPBACK_LIU_REMOTE: + exar7300_set_loopback(sc, SBE_2T3E3_LIU_VAL_LOOPBACK_REMOTE); + break; + default: + return; + } + + sc->p.loopback = mode; + + if (tx == SBE_2T3E3_ON) + dc_transmitter_onoff(sc, SBE_2T3E3_ON); + if (rx == SBE_2T3E3_ON) + dc_receiver_onoff(sc, SBE_2T3E3_ON); +} + + +void t3e3_reg_read(struct channel *sc, u32 *reg, u32 *val) +{ + u32 i; + + *val = 0; + + switch (reg[0]) { + case SBE_2T3E3_CHIP_21143: + if (!(reg[1] & 7)) + *val = dc_read(sc->addr, reg[1] / 8); + break; + case SBE_2T3E3_CHIP_CPLD: + for (i = 0; i < SBE_2T3E3_CPLD_REG_MAX; i++) + if (cpld_reg_map[i][sc->h.slot] == reg[1]) { + *val = cpld_read(sc, i); + break; + } + break; + case SBE_2T3E3_CHIP_FRAMER: + for (i = 0; i < SBE_2T3E3_FRAMER_REG_MAX; i++) + if (t3e3_framer_reg_map[i] == reg[1]) { + *val = exar7250_read(sc, i); + break; + } + break; + case SBE_2T3E3_CHIP_LIU: + for (i = 0; i < SBE_2T3E3_LIU_REG_MAX; i++) + if (t3e3_liu_reg_map[i] == reg[1]) { + *val = exar7300_read(sc, i); + break; + } + break; + default: + break; + } +} + +void t3e3_reg_write(struct channel *sc, u32 *reg) +{ + u32 i; + + switch (reg[0]) { + case SBE_2T3E3_CHIP_21143: + dc_write(sc->addr, reg[1], reg[2]); + break; + case SBE_2T3E3_CHIP_CPLD: + for (i = 0; i < SBE_2T3E3_CPLD_REG_MAX; i++) + if (cpld_reg_map[i][sc->h.slot] == reg[1]) { + cpld_write(sc, i, reg[2]); + break; + } + break; + case SBE_2T3E3_CHIP_FRAMER: + for (i = 0; i < SBE_2T3E3_FRAMER_REG_MAX; i++) + if (t3e3_framer_reg_map[i] == reg[1]) { + exar7250_write(sc, i, reg[2]); + break; + } + break; + case SBE_2T3E3_CHIP_LIU: + for (i = 0; i < SBE_2T3E3_LIU_REG_MAX; i++) + if (t3e3_liu_reg_map[i] == reg[1]) { + exar7300_write(sc, i, reg[2]); + break; + } + break; + } +} + +void t3e3_port_get(struct channel *sc, t3e3_param_t *param) +{ + memcpy(param, &(sc->p), sizeof(t3e3_param_t)); +} + +void t3e3_port_set(struct channel *sc, t3e3_param_t *param) +{ + if (param->frame_mode != 0xff) + cpld_set_frame_mode(sc, param->frame_mode); + + if (param->fractional_mode != 0xff) + cpld_set_fractional_mode(sc, param->fractional_mode, + param->bandwidth_start, + param->bandwidth_stop); + + if (param->pad_count != 0xff) + cpld_set_pad_count(sc, param->pad_count); + + if (param->crc != 0xff) + cpld_set_crc(sc, param->crc); + + if (param->receiver_on != 0xff) + dc_receiver_onoff(sc, param->receiver_on); + + if (param->transmitter_on != 0xff) + dc_transmitter_onoff(sc, param->transmitter_on); + + if (param->frame_type != 0xff) + t3e3_set_frame_type(sc, param->frame_type); + + if (param->panel != 0xff) + cpld_select_panel(sc, param->panel); + + if (param->line_build_out != 0xff) + exar7300_line_build_out_onoff(sc, param->line_build_out); + + if (param->receive_equalization != 0xff) + exar7300_receive_equalization_onoff(sc, param->receive_equalization); + + if (param->transmit_all_ones != 0xff) + exar7300_transmit_all_ones_onoff(sc, param->transmit_all_ones); + + if (param->loopback != 0xff) + t3e3_set_loopback(sc, param->loopback); + + if (param->clock_source != 0xff) + cpld_set_clock(sc, param->clock_source); + + if (param->scrambler != 0xff) + cpld_set_scrambler(sc, param->scrambler); +} + +void t3e3_port_get_stats(struct channel *sc, + t3e3_stats_t *stats) +{ + u32 result; + + sc->s.LOC = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_IO_CONTROL) + & SBE_2T3E3_FRAMER_VAL_LOSS_OF_CLOCK_STATUS ? 1 : 0; + + switch (sc->p.frame_type) { + case SBE_2T3E3_FRAME_TYPE_E3_G751: + case SBE_2T3E3_FRAME_TYPE_E3_G832: + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_2); + sc->s.LOF = result & SBE_2T3E3_FRAMER_VAL_E3_RX_LOF ? 1 : 0; + sc->s.OOF = result & SBE_2T3E3_FRAMER_VAL_E3_RX_OOF ? 1 : 0; +#if 0 + sc->s.LOS = result & SBE_2T3E3_FRAMER_VAL_E3_RX_LOS ? 1 : 0; +#else + cpld_LOS_update(sc); +#endif + sc->s.AIS = result & SBE_2T3E3_FRAMER_VAL_E3_RX_AIS ? 1 : 0; + sc->s.FERF = result & SBE_2T3E3_FRAMER_VAL_E3_RX_FERF ? 1 : 0; + break; + + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + case SBE_2T3E3_FRAME_TYPE_T3_M13: + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_CONFIGURATION_STATUS); + sc->s.AIS = result & SBE_2T3E3_FRAMER_VAL_T3_RX_AIS ? 1 : 0; +#if 0 + sc->s.LOS = result & SBE_2T3E3_FRAMER_VAL_T3_RX_LOS ? 1 : 0; +#else + cpld_LOS_update(sc); +#endif + sc->s.IDLE = result & SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE ? 1 : 0; + sc->s.OOF = result & SBE_2T3E3_FRAMER_VAL_T3_RX_OOF ? 1 : 0; + + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_STATUS); + sc->s.FERF = result & SBE_2T3E3_FRAMER_VAL_T3_RX_FERF ? 1 : 0; + sc->s.AIC = result & SBE_2T3E3_FRAMER_VAL_T3_RX_AIC ? 1 : 0; + sc->s.FEBE_code = result & SBE_2T3E3_FRAMER_VAL_T3_RX_FEBE; + + sc->s.FEAC = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_FEAC); + break; + + default: + break; + } + + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_LCV_EVENT_COUNT_MSB) << 8; + result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER); + sc->s.LCV += result; + + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_FRAMING_BIT_ERROR_EVENT_COUNT_MSB) << 8; + result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER); + sc->s.FRAMING_BIT += result; + + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_PARITY_ERROR_EVENT_COUNT_MSB) << 8; + result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER); + sc->s.PARITY_ERROR += result; + + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_FEBE_EVENT_COUNT_MSB) << 8; + result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER); + sc->s.FEBE_count += result; + + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_CP_BIT_ERROR_EVENT_COUNT_MSB) << 8; + result += exar7250_read(sc, SBE_2T3E3_FRAMER_REG_PMON_HOLDING_REGISTER); + sc->s.CP_BIT += result; + + memcpy(stats, &(sc->s), sizeof(t3e3_stats_t)); +} + +void t3e3_port_del_stats(struct channel *sc) +{ + memset(&(sc->s), 0, sizeof(t3e3_stats_t)); +} + +void t3e3_if_config(struct channel *sc, u32 cmd, char *set, + t3e3_resp_t *ret, int *rlen) +{ + t3e3_param_t *param = (t3e3_param_t *)set; + u32 *data = (u32 *)set; + + /* turn off all interrupt */ + /* cpld_stop_intr(sc); */ + + switch (cmd) { + case SBE_2T3E3_PORT_GET: + t3e3_port_get(sc, &(ret->u.param)); + *rlen = sizeof(ret->u.param); + break; + case SBE_2T3E3_PORT_SET: + t3e3_port_set(sc, param); + *rlen = 0; + break; + case SBE_2T3E3_PORT_GET_STATS: + t3e3_port_get_stats(sc, &(ret->u.stats)); + *rlen = sizeof(ret->u.stats); + break; + case SBE_2T3E3_PORT_DEL_STATS: + t3e3_port_del_stats(sc); + *rlen = 0; + break; + case SBE_2T3E3_PORT_READ_REGS: + t3e3_reg_read(sc, data, &(ret->u.data)); + *rlen = sizeof(ret->u.data); + break; + case SBE_2T3E3_PORT_WRITE_REGS: +#if 0 + printk(KERN_DEBUG "SBE_2T3E3_PORT_WRITE_REGS, 0x%x, 0x%x, 0x%x\n", + ((int*)data)[0], ((int*)data)[1], ((int*)data)[2]); +#endif + t3e3_reg_write(sc, data); + *rlen = 0; + break; + case SBE_2T3E3_LOG_LEVEL: + *rlen = 0; + break; + default: + *rlen = 0; + break; + } + + /* turn on interrupt */ + /* cpld_start_intr(sc); */ +} + +void t3e3_sc_init(struct channel *sc) +{ + memset(sc, 0, sizeof(*sc)); + + sc->p.frame_mode = SBE_2T3E3_FRAME_MODE_HDLC; + sc->p.fractional_mode = SBE_2T3E3_FRACTIONAL_MODE_NONE; + sc->p.crc = SBE_2T3E3_CRC_32; + sc->p.receiver_on = SBE_2T3E3_OFF; + sc->p.transmitter_on = SBE_2T3E3_OFF; + sc->p.frame_type = SBE_2T3E3_FRAME_TYPE_T3_CBIT; + sc->p.panel = SBE_2T3E3_PANEL_FRONT; + sc->p.line_build_out = SBE_2T3E3_OFF; + sc->p.receive_equalization = SBE_2T3E3_OFF; + sc->p.transmit_all_ones = SBE_2T3E3_OFF; + sc->p.loopback = SBE_2T3E3_LOOPBACK_NONE; + sc->p.clock_source = SBE_2T3E3_TIMING_LOCAL; + sc->p.scrambler = SBE_2T3E3_SCRAMBLER_OFF; + sc->p.pad_count = SBE_2T3E3_PAD_COUNT_1; +} diff --git a/drivers/staging/sbe-2t3e3/ctrl.h b/drivers/staging/sbe-2t3e3/ctrl.h new file mode 100644 index 000000000000..c11a58871845 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/ctrl.h @@ -0,0 +1,131 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#ifndef CTRL_H +#define CTRL_H + +#define SBE_2T3E3_OFF 0 +#define SBE_2T3E3_ON 1 + +#define SBE_2T3E3_LED_NONE 0 +#define SBE_2T3E3_LED_GREEN 1 +#define SBE_2T3E3_LED_YELLOW 2 + +#define SBE_2T3E3_CABLE_LENGTH_LESS_THAN_255_FEET 0 +#define SBE_2T3E3_CABLE_LENGTH_GREATER_THAN_255_FEET 1 + +#define SBE_2T3E3_CRC_16 0 +#define SBE_2T3E3_CRC_32 1 + +#define SBE_2T3E3_PANEL_FRONT 0 +#define SBE_2T3E3_PANEL_REAR 1 + +#define SBE_2T3E3_FRAME_MODE_HDLC 0 +#define SBE_2T3E3_FRAME_MODE_TRANSPARENT 1 +#define SBE_2T3E3_FRAME_MODE_RAW 2 + +#define SBE_2T3E3_FRAME_TYPE_E3_G751 0 +#define SBE_2T3E3_FRAME_TYPE_E3_G832 1 +#define SBE_2T3E3_FRAME_TYPE_T3_CBIT 2 +#define SBE_2T3E3_FRAME_TYPE_T3_M13 3 + +#define SBE_2T3E3_FRACTIONAL_MODE_NONE 0 +#define SBE_2T3E3_FRACTIONAL_MODE_0 1 +#define SBE_2T3E3_FRACTIONAL_MODE_1 2 +#define SBE_2T3E3_FRACTIONAL_MODE_2 3 + +#define SBE_2T3E3_SCRAMBLER_OFF 0 +#define SBE_2T3E3_SCRAMBLER_LARSCOM 1 +#define SBE_2T3E3_SCRAMBLER_ADC_KENTROX_DIGITAL 2 + +#define SBE_2T3E3_TIMING_LOCAL 0 +#define SBE_2T3E3_TIMING_LOOP 1 + +#define SBE_2T3E3_LOOPBACK_NONE 0 +#define SBE_2T3E3_LOOPBACK_ETHERNET 1 +#define SBE_2T3E3_LOOPBACK_FRAMER 2 +#define SBE_2T3E3_LOOPBACK_LIU_DIGITAL 3 +#define SBE_2T3E3_LOOPBACK_LIU_ANALOG 4 +#define SBE_2T3E3_LOOPBACK_LIU_REMOTE 5 + +#define SBE_2T3E3_PAD_COUNT_1 1 +#define SBE_2T3E3_PAD_COUNT_2 2 +#define SBE_2T3E3_PAD_COUNT_3 3 +#define SBE_2T3E3_PAD_COUNT_4 4 + +#define SBE_2T3E3_CHIP_21143 0 +#define SBE_2T3E3_CHIP_CPLD 1 +#define SBE_2T3E3_CHIP_FRAMER 2 +#define SBE_2T3E3_CHIP_LIU 3 + +#define SBE_2T3E3_LOG_LEVEL_NONE 0 +#define SBE_2T3E3_LOG_LEVEL_ERROR 1 +#define SBE_2T3E3_LOG_LEVEL_WARNING 2 +#define SBE_2T3E3_LOG_LEVEL_INFO 3 + +/* commands */ +#define SBE_2T3E3_PORT_GET 0 +#define SBE_2T3E3_PORT_SET 1 +#define SBE_2T3E3_PORT_GET_STATS 2 +#define SBE_2T3E3_PORT_DEL_STATS 3 +#define SBE_2T3E3_PORT_READ_REGS 4 +#define SBE_2T3E3_LOG_LEVEL 5 +#define SBE_2T3E3_PORT_WRITE_REGS 6 + +#define NG_SBE_2T3E3_NODE_TYPE "sbe2T3E3" +#define NG_SBE_2T3E3_COOKIE 0x03800891 + +typedef struct t3e3_param { + u_int8_t frame_mode; /* FRAME_MODE_* */ + u_int8_t crc; /* CRC_* */ + u_int8_t receiver_on; /* ON/OFF */ + u_int8_t transmitter_on; /* ON/OFF */ + u_int8_t frame_type; /* FRAME_TYPE_* */ + u_int8_t panel; /* PANEL_* */ + u_int8_t line_build_out; /* ON/OFF */ + u_int8_t receive_equalization; /* ON/OFF */ + u_int8_t transmit_all_ones; /* ON/OFF */ + u_int8_t loopback; /* LOOPBACK_* */ + u_int8_t clock_source; /* TIMING_* */ + u_int8_t scrambler; /* SCRAMBLER_* */ + u_int8_t pad_count; /* PAD_COUNT_* */ + u_int8_t log_level; /* LOG_LEVEL_* - unused */ + u_int8_t fractional_mode; /* FRACTIONAL_MODE_* */ + u_int8_t bandwidth_start; /* 0-255 */ + u_int8_t bandwidth_stop; /* 0-255 */ +} t3e3_param_t; + +typedef struct t3e3_stats { + u_int64_t in_bytes; + u32 in_packets, in_dropped; + u32 in_errors, in_error_desc, in_error_coll, in_error_drib, + in_error_crc, in_error_mii; + u_int64_t out_bytes; + u32 out_packets, out_dropped; + u32 out_errors, out_error_jab, out_error_lost_carr, + out_error_no_carr, out_error_link_fail, out_error_underflow, + out_error_dereferred; + u_int8_t LOC, LOF, OOF, LOS, AIS, FERF, IDLE, AIC, FEAC; + u_int16_t FEBE_code; + u32 LCV, FRAMING_BIT, PARITY_ERROR, FEBE_count, CP_BIT; +} t3e3_stats_t; + + +typedef struct t3e3_resp { + union { + t3e3_param_t param; + t3e3_stats_t stats; + u32 data; + } u; +} t3e3_resp_t; + +#endif /* CTRL_H */ diff --git a/drivers/staging/sbe-2t3e3/dc.c b/drivers/staging/sbe-2t3e3/dc.c new file mode 100644 index 000000000000..126a9720c6b8 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/dc.c @@ -0,0 +1,502 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include +#include +#include +#include +#include "2t3e3.h" +#include "ctrl.h" + +void dc_init(struct channel *sc) +{ + u32 val; + + dc_stop(sc); + /*dc_reset(sc);*/ /* do not want to reset here */ + + /* + * BUS_MODE (CSR0) + */ + val = SBE_2T3E3_21143_VAL_READ_LINE_ENABLE | + SBE_2T3E3_21143_VAL_READ_MULTIPLE_ENABLE | + SBE_2T3E3_21143_VAL_TRANSMIT_AUTOMATIC_POLLING_200us | + SBE_2T3E3_21143_VAL_BUS_ARBITRATION_RR; + + if (sc->h.command & 16) + val |= SBE_2T3E3_21143_VAL_WRITE_AND_INVALIDATE_ENABLE; + + switch (sc->h.cache_size) { + case 32: + val |= SBE_2T3E3_21143_VAL_CACHE_ALIGNMENT_32; + break; + case 16: + val |= SBE_2T3E3_21143_VAL_CACHE_ALIGNMENT_16; + break; + case 8: + val |= SBE_2T3E3_21143_VAL_CACHE_ALIGNMENT_8; + break; + default: + break; + } + + dc_write(sc->addr, SBE_2T3E3_21143_REG_BUS_MODE, val); + + /* OPERATION_MODE (CSR6) */ + val = SBE_2T3E3_21143_VAL_RECEIVE_ALL | + SBE_2T3E3_21143_VAL_MUST_BE_ONE | + SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_1 | + SBE_2T3E3_21143_VAL_LOOPBACK_OFF | + SBE_2T3E3_21143_VAL_PASS_ALL_MULTICAST | + SBE_2T3E3_21143_VAL_PROMISCUOUS_MODE | + SBE_2T3E3_21143_VAL_PASS_BAD_FRAMES; + dc_write(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, val); + if (sc->p.loopback == SBE_2T3E3_LOOPBACK_ETHERNET) + sc->p.loopback = SBE_2T3E3_LOOPBACK_NONE; + +#if 0 /* No need to clear this register - and it may be in use */ + /* + * BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT (CSR9) + */ + val = 0; + dc_write(sc->addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, val); +#endif + + /* + * GENERAL_PURPOSE_TIMER_AND_INTERRUPT_MITIGATION_CONTROL (CSR11) + */ + val = SBE_2T3E3_21143_VAL_CYCLE_SIZE | + SBE_2T3E3_21143_VAL_TRANSMIT_TIMER | + SBE_2T3E3_21143_VAL_NUMBER_OF_TRANSMIT_PACKETS | + SBE_2T3E3_21143_VAL_RECEIVE_TIMER | + SBE_2T3E3_21143_VAL_NUMBER_OF_RECEIVE_PACKETS; + dc_write(sc->addr, SBE_2T3E3_21143_REG_GENERAL_PURPOSE_TIMER_AND_INTERRUPT_MITIGATION_CONTROL, val); + + /* prepare descriptors and data for receive and transmit procecsses */ + if (dc_init_descriptor_list(sc) != 0) + return; + + /* clear ethernet interrupts status */ + dc_write(sc->addr, SBE_2T3E3_21143_REG_STATUS, 0xFFFFFFFF); + + /* SIA mode registers */ + dc_set_output_port(sc); +} + +void dc_start(struct channel *sc) +{ + u32 val; + + if (!(sc->r.flags & SBE_2T3E3_FLAG_NETWORK_UP)) + return; + + dc_init(sc); + + /* get actual LOS and OOF status */ + switch (sc->p.frame_type) { + case SBE_2T3E3_FRAME_TYPE_E3_G751: + case SBE_2T3E3_FRAME_TYPE_E3_G832: + val = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_2); + dev_dbg(&sc->pdev->dev, "Start Framer Rx Status = %02X\n", val); + sc->s.OOF = val & SBE_2T3E3_FRAMER_VAL_E3_RX_OOF ? 1 : 0; + break; + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + case SBE_2T3E3_FRAME_TYPE_T3_M13: + val = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_CONFIGURATION_STATUS); + dev_dbg(&sc->pdev->dev, "Start Framer Rx Status = %02X\n", val); + sc->s.OOF = val & SBE_2T3E3_FRAMER_VAL_T3_RX_OOF ? 1 : 0; + break; + default: + break; + } + cpld_LOS_update(sc); + + /* start receive and transmit processes */ + dc_transmitter_onoff(sc, SBE_2T3E3_ON); + dc_receiver_onoff(sc, SBE_2T3E3_ON); + + /* start interrupts */ + dc_start_intr(sc); +} + +#define MAX_INT_WAIT_CNT 12000 +void dc_stop(struct channel *sc) +{ + int wcnt; + + /* stop receive and transmit processes */ + dc_receiver_onoff(sc, SBE_2T3E3_OFF); + dc_transmitter_onoff(sc, SBE_2T3E3_OFF); + + /* turn off ethernet interrupts */ + dc_stop_intr(sc); + + /* wait to ensure the interrupts have been completed */ + for (wcnt = 0; wcnt < MAX_INT_WAIT_CNT; wcnt++) { + udelay(5); + if (!sc->interrupt_active) + break; + } + if (wcnt >= MAX_INT_WAIT_CNT) + dev_warn(&sc->pdev->dev, "SBE 2T3E3: Interrupt active too long\n"); + + /* clear all receive/transmit data */ + dc_drop_descriptor_list(sc); +} + +void dc_start_intr(struct channel *sc) +{ + if (sc->p.loopback == SBE_2T3E3_LOOPBACK_NONE && sc->s.OOF) + return; + + if (sc->p.receiver_on || sc->p.transmitter_on) { + if (!sc->ether.interrupt_enable_mask) + dc_write(sc->addr, SBE_2T3E3_21143_REG_STATUS, 0xFFFFFFFF); + + sc->ether.interrupt_enable_mask = + SBE_2T3E3_21143_VAL_NORMAL_INTERRUPT_SUMMARY_ENABLE | + SBE_2T3E3_21143_VAL_ABNORMAL_INTERRUPT_SUMMARY_ENABLE | + SBE_2T3E3_21143_VAL_RECEIVE_STOPPED_ENABLE | + SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE_ENABLE | + SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT_ENABLE | + SBE_2T3E3_21143_VAL_TRANSMIT_UNDERFLOW_INTERRUPT_ENABLE | + SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE_ENABLE | + SBE_2T3E3_21143_VAL_TRANSMIT_STOPPED_ENABLE | + SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT_ENABLE; + + dc_write(sc->addr, SBE_2T3E3_21143_REG_INTERRUPT_ENABLE, + sc->ether.interrupt_enable_mask); + } +} + +void dc_stop_intr(struct channel *sc) +{ + sc->ether.interrupt_enable_mask = 0; + dc_write(sc->addr, SBE_2T3E3_21143_REG_INTERRUPT_ENABLE, 0); +} + +void dc_reset(struct channel *sc) +{ + /* turn off ethernet interrupts */ + dc_write(sc->addr, SBE_2T3E3_21143_REG_INTERRUPT_ENABLE, 0); + dc_write(sc->addr, SBE_2T3E3_21143_REG_STATUS, 0xFFFFFFFF); + + /* software reset */ + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_BUS_MODE, + SBE_2T3E3_21143_VAL_SOFTWARE_RESET); + udelay(4); /* 50 PCI cycles < 2us */ + + /* clear hardware configuration */ + dc_write(sc->addr, SBE_2T3E3_21143_REG_BUS_MODE, 0); + + /* clear software configuration */ + dc_write(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, 0); + + /* turn off SIA reset */ + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_SIA_CONNECTIVITY, + SBE_2T3E3_21143_VAL_SIA_RESET); + dc_write(sc->addr, SBE_2T3E3_21143_REG_SIA_TRANSMIT_AND_RECEIVE, 0); + dc_write(sc->addr, SBE_2T3E3_21143_REG_SIA_AND_GENERAL_PURPOSE_PORT, 0); +} + + +void dc_receiver_onoff(struct channel *sc, u32 mode) +{ + u32 i, state = 0; + + if (sc->p.receiver_on == mode) + return; + + switch (mode) { + case SBE_2T3E3_OFF: + if (dc_read(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE) & + SBE_2T3E3_21143_VAL_RECEIVE_START) { + dc_clear_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_RECEIVE_START); + + for (i = 0; i < 16; i++) { + state = dc_read(sc->addr, SBE_2T3E3_21143_REG_STATUS) & + SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STATE; + if (state == SBE_2T3E3_21143_VAL_RX_STOPPED) + break; + udelay(5); + } + if (state != SBE_2T3E3_21143_VAL_RX_STOPPED) + dev_warn(&sc->pdev->dev, "SBE 2T3E3: Rx failed to stop\n"); + else + dev_info(&sc->pdev->dev, "SBE 2T3E3: Rx off\n"); + } + break; + case SBE_2T3E3_ON: + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_RECEIVE_START); + udelay(100); + dc_write(sc->addr, SBE_2T3E3_21143_REG_RECEIVE_POLL_DEMAND, 0xFFFFFFFF); + break; + default: + return; + } + + sc->p.receiver_on = mode; +} + +void dc_transmitter_onoff(struct channel *sc, u32 mode) +{ + u32 i, state = 0; + + if (sc->p.transmitter_on == mode) + return; + + switch (mode) { + case SBE_2T3E3_OFF: + if (dc_read(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE) & + SBE_2T3E3_21143_VAL_TRANSMISSION_START) { + dc_clear_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_TRANSMISSION_START); + + for (i = 0; i < 16; i++) { + state = dc_read(sc->addr, SBE_2T3E3_21143_REG_STATUS) & + SBE_2T3E3_21143_VAL_TRANSMISSION_PROCESS_STATE; + if (state == SBE_2T3E3_21143_VAL_TX_STOPPED) + break; + udelay(5); + } + if (state != SBE_2T3E3_21143_VAL_TX_STOPPED) + dev_warn(&sc->pdev->dev, "SBE 2T3E3: Tx failed to stop\n"); + } + break; + case SBE_2T3E3_ON: + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_TRANSMISSION_START); + udelay(100); + dc_write(sc->addr, SBE_2T3E3_21143_REG_TRANSMIT_POLL_DEMAND, 0xFFFFFFFF); + break; + default: + return; + } + + sc->p.transmitter_on = mode; +} + + + +void dc_set_loopback(struct channel *sc, u32 mode) +{ + u32 val; + + switch (mode) { + case SBE_2T3E3_21143_VAL_LOOPBACK_OFF: + case SBE_2T3E3_21143_VAL_LOOPBACK_INTERNAL: + break; + default: + return; + } + +#if 0 + /* restart SIA */ + dc_clear_bits(sc->addr, SBE_2T3E3_21143_REG_SIA_CONNECTIVITY, + SBE_2T3E3_21143_VAL_SIA_RESET); + udelay(1000); + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_SIA_CONNECTIVITY, + SBE_2T3E3_21143_VAL_SIA_RESET); +#endif + + /* select loopback mode */ + val = dc_read(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE) & + ~SBE_2T3E3_21143_VAL_OPERATING_MODE; + val |= mode; + dc_write(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, val); + + if (mode == SBE_2T3E3_21143_VAL_LOOPBACK_OFF) + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_FULL_DUPLEX_MODE); + else + dc_clear_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_FULL_DUPLEX_MODE); +} + +u32 dc_init_descriptor_list(struct channel *sc) +{ + u32 i, j; + struct sk_buff *m; + + if (sc->ether.rx_ring == NULL) + sc->ether.rx_ring = kzalloc(SBE_2T3E3_RX_DESC_RING_SIZE * + sizeof(t3e3_rx_desc_t), GFP_KERNEL); + if (sc->ether.rx_ring == NULL) { + dev_err(&sc->pdev->dev, "SBE 2T3E3: no buffer space for RX ring\n"); + return ENOMEM; + } + + if (sc->ether.tx_ring == NULL) + sc->ether.tx_ring = kzalloc(SBE_2T3E3_TX_DESC_RING_SIZE * + sizeof(t3e3_tx_desc_t), GFP_KERNEL); + if (sc->ether.tx_ring == NULL) { +#ifdef T3E3_USE_CONTIGMALLOC + t3e3_contigmemory_size = SBE_2T3E3_RX_DESC_RING_SIZE * + sizeof(t3e3_rx_desc_t); +#endif + kfree(sc->ether.rx_ring); + sc->ether.rx_ring = NULL; + dev_err(&sc->pdev->dev, "SBE 2T3E3: no buffer space for RX ring\n"); + return ENOMEM; + } + + + /* + * Receive ring + */ + for (i = 0; i < SBE_2T3E3_RX_DESC_RING_SIZE; i++) { + sc->ether.rx_ring[i].rdes0 = SBE_2T3E3_RX_DESC_21143_OWN; + sc->ether.rx_ring[i].rdes1 = + SBE_2T3E3_RX_DESC_SECOND_ADDRESS_CHAINED | SBE_2T3E3_MTU; + + if (sc->ether.rx_data[i] == NULL) { + if (!(m = dev_alloc_skb(MCLBYTES))) { + for (j = 0; j < i; j++) { + dev_kfree_skb_any(sc->ether.rx_data[j]); + sc->ether.rx_data[j] = NULL; + } +#ifdef T3E3_USE_CONTIGMALLOC + t3e3_contigmemory_size = SBE_2T3E3_RX_DESC_RING_SIZE * + sizeof(t3e3_rx_desc_t); +#endif + kfree(sc->ether.rx_ring); + sc->ether.rx_ring = NULL; +#ifdef T3E3_USE_CONTIGMALLOC + t3e3_contigmemory_size = SBE_2T3E3_TX_DESC_RING_SIZE * + sizeof(t3e3_tx_desc_t); +#endif + kfree(sc->ether.tx_ring); + sc->ether.tx_ring = NULL; + dev_err(&sc->pdev->dev, "SBE 2T3E3: token_alloc err:" + " no buffer space for RX ring\n"); + return ENOBUFS; + } + sc->ether.rx_data[i] = m; + } + sc->ether.rx_ring[i].rdes2 = virt_to_phys(sc->ether.rx_data[i]->data); + + sc->ether.rx_ring[i].rdes3 = virt_to_phys( + &sc->ether.rx_ring[(i + 1) % SBE_2T3E3_RX_DESC_RING_SIZE]); + } + sc->ether.rx_ring[SBE_2T3E3_RX_DESC_RING_SIZE - 1].rdes1 |= + SBE_2T3E3_RX_DESC_END_OF_RING; + sc->ether.rx_ring_current_read = 0; + + dc_write(sc->addr, SBE_2T3E3_21143_REG_RECEIVE_LIST_BASE_ADDRESS, + virt_to_phys(&sc->ether.rx_ring[0])); + + /* + * Transmit ring + */ + for (i = 0; i < SBE_2T3E3_TX_DESC_RING_SIZE; i++) { + sc->ether.tx_ring[i].tdes0 = 0; + sc->ether.tx_ring[i].tdes1 = SBE_2T3E3_TX_DESC_SECOND_ADDRESS_CHAINED | + SBE_2T3E3_TX_DESC_DISABLE_PADDING; + + sc->ether.tx_ring[i].tdes2 = 0; + sc->ether.tx_data[i] = NULL; + + sc->ether.tx_ring[i].tdes3 = virt_to_phys( + &sc->ether.tx_ring[(i + 1) % SBE_2T3E3_TX_DESC_RING_SIZE]); + } + sc->ether.tx_ring[SBE_2T3E3_TX_DESC_RING_SIZE - 1].tdes1 |= + SBE_2T3E3_TX_DESC_END_OF_RING; + + dc_write(sc->addr, SBE_2T3E3_21143_REG_TRANSMIT_LIST_BASE_ADDRESS, + virt_to_phys(&sc->ether.tx_ring[0])); + sc->ether.tx_ring_current_read = 0; + sc->ether.tx_ring_current_write = 0; + sc->ether.tx_free_cnt = SBE_2T3E3_TX_DESC_RING_SIZE; + spin_lock_init(&sc->ether.tx_lock); + + return 0; +} + +void dc_clear_descriptor_list(struct channel *sc) +{ + u32 i; + + /* clear CSR3 and CSR4 */ + dc_write(sc->addr, SBE_2T3E3_21143_REG_RECEIVE_LIST_BASE_ADDRESS, 0); + dc_write(sc->addr, SBE_2T3E3_21143_REG_TRANSMIT_LIST_BASE_ADDRESS, 0); + + /* free all data buffers on TX ring */ + for (i = 0; i < SBE_2T3E3_TX_DESC_RING_SIZE; i++) { + if (sc->ether.tx_data[i] != NULL) { + dev_kfree_skb_any(sc->ether.tx_data[i]); + sc->ether.tx_data[i] = NULL; + } + } +} + +void dc_drop_descriptor_list(struct channel *sc) +{ + u32 i; + + dc_clear_descriptor_list(sc); + + /* free all data buffers on RX ring */ + for (i = 0; i < SBE_2T3E3_RX_DESC_RING_SIZE; i++) { + if (sc->ether.rx_data[i] != NULL) { + dev_kfree_skb_any(sc->ether.rx_data[i]); + sc->ether.rx_data[i] = NULL; + } + } + + if (sc->ether.rx_ring != NULL) { +#ifdef T3E3_USE_CONTIGMALLOC + t3e3_contigmemory_size = SBE_2T3E3_RX_DESC_RING_SIZE * + sizeof(t3e3_rx_desc_t); +#endif + kfree(sc->ether.rx_ring); + sc->ether.rx_ring = NULL; + } + + if (sc->ether.tx_ring != NULL) { +#ifdef T3E3_USE_CONTIGMALLOC + t3e3_contigmemory_size = SBE_2T3E3_TX_DESC_RING_SIZE * + sizeof(t3e3_tx_desc_t); +#endif + kfree(sc->ether.tx_ring); + sc->ether.tx_ring = NULL; + } +} + + +void dc_set_output_port(struct channel *sc) +{ + dc_clear_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_PORT_SELECT); + + dc_write(sc->addr, SBE_2T3E3_21143_REG_SIA_STATUS, 0x00000301); + dc_write(sc->addr, SBE_2T3E3_21143_REG_SIA_CONNECTIVITY, 0); + dc_write(sc->addr, SBE_2T3E3_21143_REG_SIA_TRANSMIT_AND_RECEIVE, 0); + dc_write(sc->addr, SBE_2T3E3_21143_REG_SIA_AND_GENERAL_PURPOSE_PORT, 0x08000011); + + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_TRANSMIT_THRESHOLD_MODE_100Mbs | + SBE_2T3E3_21143_VAL_HEARTBEAT_DISABLE | + SBE_2T3E3_21143_VAL_PORT_SELECT | + SBE_2T3E3_21143_VAL_FULL_DUPLEX_MODE); +} + +void dc_restart(struct channel *sc) +{ + dev_warn(&sc->pdev->dev, "SBE 2T3E3: 21143 restart\n"); + + dc_stop(sc); + dc_reset(sc); + dc_init(sc); /* stop + reset + init */ + dc_start(sc); +} diff --git a/drivers/staging/sbe-2t3e3/exar7250.c b/drivers/staging/sbe-2t3e3/exar7250.c new file mode 100644 index 000000000000..809f446bdc3a --- /dev/null +++ b/drivers/staging/sbe-2t3e3/exar7250.c @@ -0,0 +1,217 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include "2t3e3.h" +#include "ctrl.h" + +void exar7250_init(struct channel *sc) +{ + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_OPERATING_MODE, + SBE_2T3E3_FRAMER_VAL_T3_CBIT | + SBE_2T3E3_FRAMER_VAL_INTERRUPT_ENABLE_RESET | + SBE_2T3E3_FRAMER_VAL_TIMING_ASYNCH_TXINCLK); + + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_IO_CONTROL, + SBE_2T3E3_FRAMER_VAL_DISABLE_TX_LOSS_OF_CLOCK | + SBE_2T3E3_FRAMER_VAL_DISABLE_RX_LOSS_OF_CLOCK | + SBE_2T3E3_FRAMER_VAL_AMI_LINE_CODE | + SBE_2T3E3_FRAMER_VAL_RX_LINE_CLOCK_INVERT); + + exar7250_set_frame_type(sc, SBE_2T3E3_FRAME_TYPE_T3_CBIT); +} + +void exar7250_set_frame_type(struct channel *sc, u32 type) +{ + u32 val; + + switch (type) { + case SBE_2T3E3_FRAME_TYPE_E3_G751: + case SBE_2T3E3_FRAME_TYPE_E3_G832: + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + case SBE_2T3E3_FRAME_TYPE_T3_M13: + break; + default: + return; + } + + exar7250_stop_intr(sc, type); + + val = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_OPERATING_MODE); + val &= ~(SBE_2T3E3_FRAMER_VAL_LOCAL_LOOPBACK_MODE | + SBE_2T3E3_FRAMER_VAL_T3_E3_SELECT | + SBE_2T3E3_FRAMER_VAL_FRAME_FORMAT_SELECT); + switch (type) { + case SBE_2T3E3_FRAME_TYPE_E3_G751: + val |= SBE_2T3E3_FRAMER_VAL_E3_G751; + break; + case SBE_2T3E3_FRAME_TYPE_E3_G832: + val |= SBE_2T3E3_FRAMER_VAL_E3_G832; + break; + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + val |= SBE_2T3E3_FRAMER_VAL_T3_CBIT; + break; + case SBE_2T3E3_FRAME_TYPE_T3_M13: + val |= SBE_2T3E3_FRAMER_VAL_T3_M13; + break; + default: + return; + } + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_OPERATING_MODE, val); + exar7250_start_intr(sc, type); +} + + +void exar7250_start_intr(struct channel *sc, u32 type) +{ + u32 val; + + switch (type) { + case SBE_2T3E3_FRAME_TYPE_E3_G751: + case SBE_2T3E3_FRAME_TYPE_E3_G832: + val = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_2); +#if 0 + sc->s.LOS = val & SBE_2T3E3_FRAMER_VAL_E3_RX_LOS ? 1 : 0; +#else + cpld_LOS_update(sc); +#endif + sc->s.OOF = val & SBE_2T3E3_FRAMER_VAL_E3_RX_OOF ? 1 : 0; + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_1); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_1, + SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_ENABLE); +#if 0 + /*SBE_2T3E3_FRAMER_VAL_E3_RX_COFA_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_LOF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_AIS_INTERRUPT_ENABLE);*/ +#endif + + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_2); +#if 0 + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_2, + SBE_2T3E3_FRAMER_VAL_E3_RX_FEBE_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_FERF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_FRAMING_BYTE_ERROR_INTERRUPT_ENABLE); +#endif + break; + + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + case SBE_2T3E3_FRAME_TYPE_T3_M13: + val = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_CONFIGURATION_STATUS); +#if 0 + sc->s.LOS = val & SBE_2T3E3_FRAMER_VAL_T3_RX_LOS ? 1 : 0; +#else + cpld_LOS_update(sc); +#endif + sc->s.OOF = val & SBE_2T3E3_FRAMER_VAL_T3_RX_OOF ? 1 : 0; + + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_STATUS); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_ENABLE, + SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_ENABLE); +#if 0 + /* SBE_2T3E3_FRAMER_VAL_T3_RX_CP_BIT_ERROR_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_AIS_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_FERF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_AIC_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_P_BIT_INTERRUPT_ENABLE);*/ +#endif + + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_FEAC_INTERRUPT_ENABLE_STATUS); +#if 0 + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_RX_FEAC_INTERRUPT_ENABLE_STATUS, + SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_REMOVE_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_VALID_INTERRUPT_ENABLE); +#endif + + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_RX_LAPD_CONTROL, 0); + break; + + default: + return; + } + + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_STATUS); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_ENABLE, + SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_ENABLE); +} + + +void exar7250_stop_intr(struct channel *sc, u32 type) +{ + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_ENABLE, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_STATUS); + + switch (type) { + case SBE_2T3E3_FRAME_TYPE_E3_G751: + case SBE_2T3E3_FRAME_TYPE_E3_G832: + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_1, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_1); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_2, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_2); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_E3_RX_LAPD_CONTROL, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_LAPD_CONTROL); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_E3_TX_LAPD_STATUS, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_TX_LAPD_STATUS); + break; + + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + case SBE_2T3E3_FRAME_TYPE_T3_M13: + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_ENABLE, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_STATUS); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_RX_FEAC_INTERRUPT_ENABLE_STATUS, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_FEAC_INTERRUPT_ENABLE_STATUS); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_RX_LAPD_CONTROL, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_LAPD_CONTROL); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_TX_FEAC_CONFIGURATION_STATUS, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_TX_FEAC_CONFIGURATION_STATUS); + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_TX_LAPD_STATUS, 0); + exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_TX_LAPD_STATUS); + break; + } +} + + + + +void exar7250_unipolar_onoff(struct channel *sc, u32 mode) +{ + switch (mode) { + case SBE_2T3E3_OFF: + exar7300_clear_bit(sc, SBE_2T3E3_FRAMER_REG_IO_CONTROL, + SBE_2T3E3_FRAMER_VAL_UNIPOLAR); + break; + case SBE_2T3E3_ON: + exar7300_set_bit(sc, SBE_2T3E3_FRAMER_REG_IO_CONTROL, + SBE_2T3E3_FRAMER_VAL_UNIPOLAR); + break; + } +} + +void exar7250_set_loopback(struct channel *sc, u32 mode) +{ + switch (mode) { + case SBE_2T3E3_FRAMER_VAL_LOOPBACK_OFF: + exar7300_clear_bit(sc, SBE_2T3E3_FRAMER_REG_OPERATING_MODE, + SBE_2T3E3_FRAMER_VAL_LOCAL_LOOPBACK_MODE); + break; + case SBE_2T3E3_FRAMER_VAL_LOOPBACK_ON: + exar7300_set_bit(sc, SBE_2T3E3_FRAMER_REG_OPERATING_MODE, + SBE_2T3E3_FRAMER_VAL_LOCAL_LOOPBACK_MODE); + break; + } +} diff --git a/drivers/staging/sbe-2t3e3/exar7300.c b/drivers/staging/sbe-2t3e3/exar7300.c new file mode 100644 index 000000000000..d10d696cf6fb --- /dev/null +++ b/drivers/staging/sbe-2t3e3/exar7300.c @@ -0,0 +1,182 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include "2t3e3.h" +#include "ctrl.h" + +void exar7300_init(struct channel *sc) +{ + exar7300_write(sc, SBE_2T3E3_LIU_REG_REG1, 0); + + /* enable line decodeer and encoder */ + exar7300_write(sc, SBE_2T3E3_LIU_REG_REG2, 0); + exar7300_write(sc, SBE_2T3E3_LIU_REG_REG3, 0); + exar7300_write(sc, SBE_2T3E3_LIU_REG_REG4, + SBE_2T3E3_LIU_VAL_T3_MODE_SELECT | + SBE_2T3E3_LIU_VAL_LOOPBACK_OFF); +} + +void exar7300_set_loopback(struct channel *sc, u32 mode) +{ + u32 val; + + switch (mode) { + case SBE_2T3E3_LIU_VAL_LOOPBACK_OFF: + case SBE_2T3E3_LIU_VAL_LOOPBACK_REMOTE: + case SBE_2T3E3_LIU_VAL_LOOPBACK_ANALOG: + case SBE_2T3E3_LIU_VAL_LOOPBACK_DIGITAL: + break; + default: + return; + } + + val = exar7300_read(sc, SBE_2T3E3_LIU_REG_REG4); + val &= ~(SBE_2T3E3_LIU_VAL_LOCAL_LOOPBACK | SBE_2T3E3_LIU_VAL_REMOTE_LOOPBACK); + val |= mode; + exar7300_write(sc, SBE_2T3E3_LIU_REG_REG4, val); + +#if 0 + /* TODO - is it necessary? idea from 2T3E3_HW_Test_code */ + switch (mode) { + case SBE_2T3E3_LIU_VAL_LOOPBACK_OFF: + break; + case SBE_2T3E3_LIU_VAL_LOOPBACK_REMOTE: + exar7300_receive_equalization_onoff(sc, SBE_2T3E3_ON); + break; + case SBE_2T3E3_LIU_VAL_LOOPBACK_ANALOG: + exar7300_receive_equalization_onoff(sc, SBE_2T3E3_OFF); + break; + case SBE_2T3E3_LIU_VAL_LOOPBACK_DIGITAL: + exar7300_receive_equalization_onoff(sc, SBE_2T3E3_ON); + break; + } +#endif +} + +void exar7300_set_frame_type(struct channel *sc, u32 type) +{ + u32 val; + + switch (type) { + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + case SBE_2T3E3_FRAME_TYPE_T3_M13: + case SBE_2T3E3_FRAME_TYPE_E3_G751: + case SBE_2T3E3_FRAME_TYPE_E3_G832: + break; + default: + return; + } + + val = exar7300_read(sc, SBE_2T3E3_LIU_REG_REG4); + val &= ~(SBE_2T3E3_LIU_VAL_T3_MODE_SELECT | + SBE_2T3E3_LIU_VAL_E3_MODE_SELECT); + + switch (type) { + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + case SBE_2T3E3_FRAME_TYPE_T3_M13: + val |= SBE_2T3E3_LIU_VAL_T3_MODE_SELECT; + break; + case SBE_2T3E3_FRAME_TYPE_E3_G751: + case SBE_2T3E3_FRAME_TYPE_E3_G832: + val |= SBE_2T3E3_LIU_VAL_E3_MODE_SELECT; + break; + default: + return; + } + + exar7300_write(sc, SBE_2T3E3_LIU_REG_REG4, val); +} + + +void exar7300_transmit_all_ones_onoff(struct channel *sc, u32 mode) +{ + if (sc->p.transmit_all_ones == mode) + return; + + switch (mode) { + case SBE_2T3E3_ON: + exar7300_set_bit(sc, SBE_2T3E3_LIU_REG_REG1, + SBE_2T3E3_LIU_VAL_TRANSMIT_ALL_ONES); + break; + case SBE_2T3E3_OFF: + exar7300_clear_bit(sc, SBE_2T3E3_LIU_REG_REG1, + SBE_2T3E3_LIU_VAL_TRANSMIT_ALL_ONES); + break; + default: + return; + } + + sc->p.transmit_all_ones = mode; +} + +void exar7300_receive_equalization_onoff(struct channel *sc, u32 mode) +{ + if (sc->p.receive_equalization == mode) + return; + + switch (mode) { + case SBE_2T3E3_OFF: + exar7300_set_bit(sc, SBE_2T3E3_LIU_REG_REG2, + SBE_2T3E3_LIU_VAL_RECEIVE_EQUALIZATION_DISABLE); + break; + case SBE_2T3E3_ON: + exar7300_clear_bit(sc, SBE_2T3E3_LIU_REG_REG2, + SBE_2T3E3_LIU_VAL_RECEIVE_EQUALIZATION_DISABLE); + break; + default: + return; + } + + sc->p.receive_equalization = mode; +} + +void exar7300_line_build_out_onoff(struct channel *sc, u32 mode) +{ + if (sc->p.line_build_out == mode) + return; + + switch (mode) { + case SBE_2T3E3_OFF: + exar7300_set_bit(sc, SBE_2T3E3_LIU_REG_REG1, + SBE_2T3E3_LIU_VAL_TRANSMIT_LEVEL_SELECT); + exar7300_receive_equalization_onoff(sc, SBE_2T3E3_OFF); + break; + case SBE_2T3E3_ON: + exar7300_clear_bit(sc, SBE_2T3E3_LIU_REG_REG1, + SBE_2T3E3_LIU_VAL_TRANSMIT_LEVEL_SELECT); + exar7300_receive_equalization_onoff(sc, SBE_2T3E3_ON); + break; + default: + return; + } + + sc->p.line_build_out = mode; +} + +/* TODO - what about encoder in raw mode??? disable it too? */ +void exar7300_unipolar_onoff(struct channel *sc, u32 mode) +{ + switch (mode) { + case SBE_2T3E3_OFF: + exar7300_clear_bit(sc, SBE_2T3E3_LIU_REG_REG3, + SBE_2T3E3_LIU_VAL_DECODER_DISABLE); + exar7300_clear_bit(sc, SBE_2T3E3_LIU_REG_REG1, + SBE_2T3E3_LIU_VAL_TRANSMIT_BINARY_DATA); + break; + case SBE_2T3E3_ON: + exar7300_set_bit(sc, SBE_2T3E3_LIU_REG_REG3, + SBE_2T3E3_LIU_VAL_DECODER_DISABLE); + exar7300_set_bit(sc, SBE_2T3E3_LIU_REG_REG1, + SBE_2T3E3_LIU_VAL_TRANSMIT_BINARY_DATA); + break; + } +} diff --git a/drivers/staging/sbe-2t3e3/intr.c b/drivers/staging/sbe-2t3e3/intr.c new file mode 100644 index 000000000000..7ad1a8382037 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/intr.c @@ -0,0 +1,635 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include +#include +#include +#include "2t3e3.h" + +irqreturn_t t3e3_intr(int irq, void *dev_instance) +{ + struct channel *sc = dev_to_priv(dev_instance); + u32 val; + irqreturn_t ret = IRQ_NONE; + + sc->interrupt_active = 1; + + val = cpld_read(sc, SBE_2T3E3_CPLD_REG_PICSR); + + if (val & SBE_2T3E3_CPLD_VAL_RECEIVE_LOSS_OF_SIGNAL_CHANGE) { + dev_dbg(&sc->pdev->dev, + "Rx LOS Chng Int r=%02x (LOS|OOF=%02x)\n", + val, (sc->s.LOS << 4) | sc->s.OOF); + cpld_LOS_update(sc); + ret = IRQ_HANDLED; + } + + if (val & SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_ETHERNET_ASSERTED) { + dc_intr(sc); + ret = IRQ_HANDLED; + } + + if (val & SBE_2T3E3_CPLD_VAL_INTERRUPT_FROM_FRAMER_ASSERTED) { + exar7250_intr(sc); + ret = IRQ_HANDLED; + } + + /* + we don't care about other interrupt sources (DMO, LOS, LCV) because + they are handled by Framer too + */ + + sc->interrupt_active = 0; + return ret; +} + +void dc_intr(struct channel *sc) +{ + u32 val; + + /* disable ethernet interrupts */ + /* grrr this clears interrupt summary bits !!! */ + dc_write(sc->addr, SBE_2T3E3_21143_REG_INTERRUPT_ENABLE, 0); + + while ((val = dc_read(sc->addr, SBE_2T3E3_21143_REG_STATUS)) & + (SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STOPPED | + SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE | + SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT | + SBE_2T3E3_21143_VAL_TRANSMIT_UNDERFLOW | + SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE | + SBE_2T3E3_21143_VAL_TRANSMIT_PROCESS_STOPPED | + SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT)) { + dc_write(sc->addr, SBE_2T3E3_21143_REG_STATUS, val); + + dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Ethernet controller interrupt! (CSR5 = %08X)\n", + val); + + if (val & (SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT | + SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE | + SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STOPPED)) { + if (val & SBE_2T3E3_21143_VAL_RECEIVE_INTERRUPT) + dev_dbg(&sc->pdev->dev, + "Receive interrupt (LOS=%d, OOF=%d)\n", + sc->s.LOS, sc->s.OOF); + if (val & SBE_2T3E3_21143_VAL_RECEIVE_BUFFER_UNAVAILABLE) + dev_dbg(&sc->pdev->dev, + "Receive buffer unavailable\n"); + if (val & SBE_2T3E3_21143_VAL_RECEIVE_PROCESS_STOPPED) + dev_dbg(&sc->pdev->dev, + "Receive process stopped\n"); + dc_intr_rx(sc); + } + + if (val & SBE_2T3E3_21143_VAL_TRANSMIT_UNDERFLOW) { + dev_dbg(&sc->pdev->dev, "Transmit underflow\n"); + dc_intr_tx_underflow(sc); + } + + if (val & (SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE | + SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT | + SBE_2T3E3_21143_VAL_TRANSMIT_PROCESS_STOPPED)) { + if (val & SBE_2T3E3_21143_VAL_TRANSMIT_INTERRUPT) + dev_dbg(&sc->pdev->dev, "Transmit interrupt\n"); + if (val & SBE_2T3E3_21143_VAL_TRANSMIT_BUFFER_UNAVAILABLE) + dev_dbg(&sc->pdev->dev, + "Transmit buffer unavailable\n"); + if (val & SBE_2T3E3_21143_VAL_TRANSMIT_PROCESS_STOPPED) + dev_dbg(&sc->pdev->dev, + "Transmit process stopped\n"); + dc_intr_tx(sc); + } + } + + /* enable ethernet interrupts */ + dc_write(sc->addr, SBE_2T3E3_21143_REG_INTERRUPT_ENABLE, + sc->ether.interrupt_enable_mask); +} + +void dc_intr_rx(struct channel *sc) +{ + u32 current_read; + u32 error_mask, error; + t3e3_rx_desc_t *current_desc; + struct sk_buff *m, *m2; + unsigned rcv_len; + + sc->rcv_count++; /* for the activity LED */ + + current_read = sc->ether.rx_ring_current_read; + dev_dbg(&sc->pdev->dev, "intr_rx current_read = %d\n", current_read); + + /* when ethernet loopback is set, ignore framer signals */ + if ((sc->p.loopback != SBE_2T3E3_LOOPBACK_ETHERNET) && sc->s.OOF) { + while (!(sc->ether.rx_ring[current_read].rdes0 & + SBE_2T3E3_RX_DESC_21143_OWN)) { + current_desc = &sc->ether.rx_ring[current_read]; + current_desc->rdes1 &= SBE_2T3E3_RX_DESC_END_OF_RING | + SBE_2T3E3_RX_DESC_SECOND_ADDRESS_CHAINED; + current_desc->rdes1 |= SBE_2T3E3_MTU; + current_desc->rdes0 = SBE_2T3E3_RX_DESC_21143_OWN; + current_read = (current_read + 1) % SBE_2T3E3_RX_DESC_RING_SIZE; + } + sc->ether.rx_ring_current_read = current_read; + return; + } + + while (!(sc->ether.rx_ring[current_read].rdes0 & + SBE_2T3E3_RX_DESC_21143_OWN)) { + current_desc = &sc->ether.rx_ring[current_read]; + + dev_dbg(&sc->pdev->dev, "rdes0: %08X rdes1: %08X\n", + current_desc->rdes0, current_desc->rdes1); + + m = sc->ether.rx_data[current_read]; + rcv_len = (current_desc->rdes0 & SBE_2T3E3_RX_DESC_FRAME_LENGTH) >> + SBE_2T3E3_RX_DESC_FRAME_LENGTH_SHIFT; + + dev_dbg(&sc->pdev->dev, "mbuf was received (mbuf len = %d)\n", + rcv_len); + + switch (sc->p.crc) { + case SBE_2T3E3_CRC_16: + rcv_len -= SBE_2T3E3_CRC16_LENGTH; + break; + case SBE_2T3E3_CRC_32: + rcv_len -= SBE_2T3E3_CRC32_LENGTH; + break; + default: + break; + } + + if (current_desc->rdes0 & SBE_2T3E3_RX_DESC_LAST_DESC) { + + /* TODO: is collision possible? */ + error_mask = SBE_2T3E3_RX_DESC_DESC_ERROR | + SBE_2T3E3_RX_DESC_COLLISION_SEEN | + SBE_2T3E3_RX_DESC_DRIBBLING_BIT; + + switch (sc->p.frame_mode) { + case SBE_2T3E3_FRAME_MODE_HDLC: + error_mask |= SBE_2T3E3_RX_DESC_MII_ERROR; + if (sc->p.crc == SBE_2T3E3_CRC_32) + error_mask |= SBE_2T3E3_RX_DESC_CRC_ERROR; + break; + case SBE_2T3E3_FRAME_MODE_TRANSPARENT: + case SBE_2T3E3_FRAME_MODE_RAW: + break; + default: + error_mask = 0; + } + + if (sc->s.LOS) { + error_mask &= ~(SBE_2T3E3_RX_DESC_DRIBBLING_BIT || + SBE_2T3E3_RX_DESC_MII_ERROR); + } + + error = current_desc->rdes0 & error_mask; + if (error) { + sc->s.in_errors++; + dev_dbg(&sc->pdev->dev, + "error interrupt: NO_ERROR_MESSAGE = %d\n", + sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES ? 1 : 0); + + current_desc->rdes1 &= SBE_2T3E3_RX_DESC_END_OF_RING | + SBE_2T3E3_RX_DESC_SECOND_ADDRESS_CHAINED; + current_desc->rdes1 |= SBE_2T3E3_MTU; + current_desc->rdes0 = SBE_2T3E3_RX_DESC_21143_OWN; + + if (error & SBE_2T3E3_RX_DESC_DESC_ERROR) { + if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES)) + dev_err(&sc->pdev->dev, + "SBE 2T3E3: descriptor error\n"); + sc->s.in_error_desc++; + } + + if (error & SBE_2T3E3_RX_DESC_COLLISION_SEEN) { + if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES)) + dev_err(&sc->pdev->dev, + "SBE 2T3E3: collision seen\n"); + sc->s.in_error_coll++; + } else { + if (error & SBE_2T3E3_RX_DESC_DRIBBLING_BIT) { + if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES)) + dev_err(&sc->pdev->dev, + "SBE 2T3E3: dribbling bits error\n"); + sc->s.in_error_drib++; + } + + if (error & SBE_2T3E3_RX_DESC_CRC_ERROR) { + if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES)) + dev_err(&sc->pdev->dev, + "SBE 2T3E3: crc error\n"); + sc->s.in_error_crc++; + } + } + + if (error & SBE_2T3E3_RX_DESC_MII_ERROR) { + if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES)) + dev_err(&sc->pdev->dev, "SBE 2T3E3: mii error\n"); + sc->s.in_error_mii++; + } + + current_read = (current_read + 1) % SBE_2T3E3_RX_DESC_RING_SIZE; + sc->r.flags |= SBE_2T3E3_FLAG_NO_ERROR_MESSAGES; + continue; + } + } + + current_desc->rdes1 &= SBE_2T3E3_RX_DESC_END_OF_RING | + SBE_2T3E3_RX_DESC_SECOND_ADDRESS_CHAINED; + current_desc->rdes1 |= SBE_2T3E3_MTU; + + if (rcv_len > 1600) { + sc->s.in_errors++; + sc->s.in_dropped++; + if (!(sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES)) + dev_err(&sc->pdev->dev, "SBE 2T3E3: oversized rx: rdes0 = %08X\n", + current_desc->rdes0); + } else { + m2 = dev_alloc_skb(MCLBYTES); + if (m2 != NULL) { + current_desc->rdes2 = virt_to_phys(m2->data); + sc->ether.rx_data[current_read] = m2; + sc->s.in_packets++; + sc->s.in_bytes += rcv_len; + m->dev = sc->dev; + skb_put(m, rcv_len); + skb_reset_mac_header(m); + m->protocol = hdlc_type_trans(m, m->dev); + netif_rx(m); + + /* good packet was received so we will show error messages again... */ + if (sc->r.flags & SBE_2T3E3_FLAG_NO_ERROR_MESSAGES) { + dev_dbg(&sc->pdev->dev, + "setting ERROR_MESSAGES->0\n"); + sc->r.flags &= ~SBE_2T3E3_FLAG_NO_ERROR_MESSAGES; + } + + } else { + sc->s.in_errors++; + sc->s.in_dropped++; + } + } + current_desc->rdes0 = SBE_2T3E3_RX_DESC_21143_OWN; + current_read = (current_read + 1) % SBE_2T3E3_RX_DESC_RING_SIZE; + } + + sc->ether.rx_ring_current_read = current_read; + + dc_write(sc->addr, SBE_2T3E3_21143_REG_RECEIVE_POLL_DEMAND, 0xFFFFFFFF); +} + +void dc_intr_tx(struct channel *sc) +{ + u32 current_read, current_write; + u32 last_segment, error; + t3e3_tx_desc_t *current_desc; + + spin_lock(&sc->ether.tx_lock); + + current_read = sc->ether.tx_ring_current_read; + current_write = sc->ether.tx_ring_current_write; + + while (current_read != current_write) { + current_desc = &sc->ether.tx_ring[current_read]; + + if (current_desc->tdes0 & SBE_2T3E3_RX_DESC_21143_OWN) + break; + + dev_dbg(&sc->pdev->dev, + "txeof: tdes0 = %08X tdes1 = %08X\n", + current_desc->tdes0, current_desc->tdes1); + + error = current_desc->tdes0 & (SBE_2T3E3_TX_DESC_ERROR_SUMMARY | + SBE_2T3E3_TX_DESC_TRANSMIT_JABBER_TIMEOUT | + SBE_2T3E3_TX_DESC_LOSS_OF_CARRIER | + SBE_2T3E3_TX_DESC_NO_CARRIER | + SBE_2T3E3_TX_DESC_LINK_FAIL_REPORT | + SBE_2T3E3_TX_DESC_UNDERFLOW_ERROR | + SBE_2T3E3_TX_DESC_DEFFERED); + + last_segment = current_desc->tdes1 & SBE_2T3E3_TX_DESC_LAST_SEGMENT; + + current_desc->tdes0 = 0; + current_desc->tdes1 &= SBE_2T3E3_TX_DESC_END_OF_RING | + SBE_2T3E3_TX_DESC_SECOND_ADDRESS_CHAINED; + current_desc->tdes2 = 0; + sc->ether.tx_free_cnt++; + + if (last_segment != SBE_2T3E3_TX_DESC_LAST_SEGMENT) { + current_read = (current_read + 1) % SBE_2T3E3_TX_DESC_RING_SIZE; + continue; + } + + + if (sc->ether.tx_data[current_read]) { + sc->s.out_packets++; + sc->s.out_bytes += sc->ether.tx_data[current_read]->len; + dev_kfree_skb_any(sc->ether.tx_data[current_read]); + sc->ether.tx_data[current_read] = NULL; + } + + if (error > 0) { + sc->s.out_errors++; + + if (error & SBE_2T3E3_TX_DESC_TRANSMIT_JABBER_TIMEOUT) { + dev_err(&sc->pdev->dev, "SBE 2T3E3: transmit jabber timeout\n"); + sc->s.out_error_jab++; + } + + if (sc->p.loopback != SBE_2T3E3_LOOPBACK_ETHERNET) { + if (error & SBE_2T3E3_TX_DESC_LOSS_OF_CARRIER) { + dev_err(&sc->pdev->dev, "SBE 2T3E3: loss of carrier\n"); + sc->s.out_error_lost_carr++; + } + + if (error & SBE_2T3E3_TX_DESC_NO_CARRIER) { + dev_err(&sc->pdev->dev, "SBE 2T3E3: no carrier\n"); + sc->s.out_error_no_carr++; + } + } + + if (error & SBE_2T3E3_TX_DESC_LINK_FAIL_REPORT) { + dev_err(&sc->pdev->dev, "SBE 2T3E3: link fail report\n"); + sc->s.out_error_link_fail++; + } + + if (error & SBE_2T3E3_TX_DESC_UNDERFLOW_ERROR) { + dev_err(&sc->pdev->dev, "SBE 2T3E3:" + " transmission underflow error\n"); + sc->s.out_error_underflow++; + spin_unlock(&sc->ether.tx_lock); + + dc_restart(sc); + return; + } + + if (error & SBE_2T3E3_TX_DESC_DEFFERED) { + dev_err(&sc->pdev->dev, "SBE 2T3E3: transmission deferred\n"); + sc->s.out_error_dereferred++; + } + } + + current_read = (current_read + 1) % SBE_2T3E3_TX_DESC_RING_SIZE; + } + + sc->ether.tx_ring_current_read = current_read; + + /* Relieve flow control when the TX queue is drained at least half way */ + if (sc->ether.tx_full && + (sc->ether.tx_free_cnt >= (SBE_2T3E3_TX_DESC_RING_SIZE / 2))) { + sc->ether.tx_full = 0; + netif_wake_queue(sc->dev); + } + spin_unlock(&sc->ether.tx_lock); +} + + +void dc_intr_tx_underflow(struct channel *sc) +{ + u32 val; + + dc_transmitter_onoff(sc, SBE_2T3E3_OFF); + + val = dc_read(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE); + dc_clear_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS); + + switch (val & SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS) { + case SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_1: + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_2); + break; + case SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_2: + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_3); + break; + case SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_3: + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_4); + break; + case SBE_2T3E3_21143_VAL_THRESHOLD_CONTROL_BITS_4: + default: + dc_set_bits(sc->addr, SBE_2T3E3_21143_REG_OPERATION_MODE, + SBE_2T3E3_21143_VAL_STORE_AND_FORWARD); + break; + } + + dc_transmitter_onoff(sc, SBE_2T3E3_ON); +} + + + + +void exar7250_intr(struct channel *sc) +{ + u32 status, old_OOF; + +#if 0 + /* disable interrupts */ + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_ENABLE, 0); +#endif + + old_OOF = sc->s.OOF; + + status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_STATUS); + dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Framer interrupt! (REG[0x05] = %02X)\n", status); + + switch (sc->p.frame_type) { + case SBE_2T3E3_FRAME_TYPE_E3_G751: + case SBE_2T3E3_FRAME_TYPE_E3_G832: + exar7250_E3_intr(sc, status); + break; + + case SBE_2T3E3_FRAME_TYPE_T3_CBIT: + case SBE_2T3E3_FRAME_TYPE_T3_M13: + exar7250_T3_intr(sc, status); + break; + + default: + break; + } + + if (sc->s.OOF != old_OOF) { + if (sc->s.OOF) { + if (sc->p.loopback == SBE_2T3E3_LOOPBACK_NONE) { + dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Disabling eth interrupts\n"); + /* turn off ethernet interrupts */ + dc_stop_intr(sc); + } + } else if (sc->r.flags & SBE_2T3E3_FLAG_NETWORK_UP) { + dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Enabling eth interrupts\n"); + /* start interrupts */ + sc->s.OOF = 1; + dc_intr_rx(sc); + sc->s.OOF = 0; + if (sc->p.receiver_on) { + dc_receiver_onoff(sc, SBE_2T3E3_OFF); + dc_receiver_onoff(sc, SBE_2T3E3_ON); + } + dc_start_intr(sc); + } + } +#if 0 + /* reenable interrupts */ + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_BLOCK_INTERRUPT_ENABLE, + SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_ENABLE + ); +#endif +} + + +void exar7250_T3_intr(struct channel *sc, u32 block_status) +{ + u32 status, result; + + if (block_status & SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_STATUS) { + status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_STATUS); + + if (status) { + dev_dbg(&sc->pdev->dev, + "Framer interrupt T3 RX (REG[0x13] = %02X)\n", + status); + + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_CONFIGURATION_STATUS); + +#if 0 + if (status & SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_STATUS) { + dev_dbg(&sc->pdev->dev, + "Framer interrupt T3: LOS\n"); + sc->s.LOS = result & SBE_2T3E3_FRAMER_VAL_T3_RX_LOS ? 1 : 0; + + } +#else + cpld_LOS_update(sc); +#endif + if (status & SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_STATUS) { + sc->s.OOF = result & SBE_2T3E3_FRAMER_VAL_T3_RX_OOF ? 1 : 0; + dev_dbg(&sc->pdev->dev, + "Framer interrupt T3: OOF (%d)\n", + sc->s.OOF); + } + + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_RX_INTERRUPT_ENABLE, + SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_ENABLE); +#if 0 + SBE_2T3E3_FRAMER_VAL_T3_RX_CP_BIT_ERROR_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_LOS_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_AIS_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_IDLE_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_FERF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_AIC_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_OOF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_P_BIT_INTERRUPT_ENABLE +#endif + } + + status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_FEAC_INTERRUPT_ENABLE_STATUS); + if (status) { + dev_dbg(&sc->pdev->dev, + "Framer interrupt T3 RX (REG[0x17] = %02X)\n", + status); +#if 0 + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_T3_RX_FEAC_INTERRUPT_ENABLE_STATUS, + SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_REMOVE_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_T3_RX_FEAC_VALID_INTERRUPT_ENABLE + ); +#endif + } + + status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_RX_LAPD_CONTROL); + if (status) + dev_dbg(&sc->pdev->dev, + "Framer interrupt T3 RX (REG[0x18] = %02X)\n", + status); + } + + + if (block_status & SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_STATUS) { + status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_TX_FEAC_CONFIGURATION_STATUS); + dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Framer interrupt T3 TX (REG[0x31] = %02X)\n", + status); + + status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_T3_TX_LAPD_STATUS); + dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Framer interrupt T3 TX (REG[0x34] = %02X)\n", + status); + } +} + + +void exar7250_E3_intr(struct channel *sc, u32 block_status) +{ + u32 status, result; + + if (block_status & SBE_2T3E3_FRAMER_VAL_RX_INTERRUPT_STATUS) { + status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_1); + + if (status) { + dev_dbg(&sc->pdev->dev, + "Framer interrupt E3 RX (REG[0x14] = %02X)\n", + status); + + result = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_CONFIGURATION_STATUS_2); + +#if 0 + if (status & SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_STATUS) { + dev_dbg(&sc->pdev->dev, + "Framer interrupt E3: LOS\n"); + sc->s.LOS = result & SBE_2T3E3_FRAMER_VAL_E3_RX_LOS ? 1 : 0; + } +#else + cpld_LOS_update(sc); +#endif + if (status & SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_STATUS) { + sc->s.OOF = result & SBE_2T3E3_FRAMER_VAL_E3_RX_OOF ? 1 : 0; + dev_dbg(&sc->pdev->dev, + "Framer interrupt E3: OOF (%d)\n", + sc->s.OOF); + } + + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_1, + SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_ENABLE + ); +#if 0 + SBE_2T3E3_FRAMER_VAL_E3_RX_COFA_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_OOF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_LOF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_LOS_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_AIS_INTERRUPT_ENABLE +#endif + } + + status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_STATUS_2); + if (status) { + dev_dbg(&sc->pdev->dev, + "Framer interrupt E3 RX (REG[0x15] = %02X)\n", + status); + +#if 0 + exar7250_write(sc, SBE_2T3E3_FRAMER_REG_E3_RX_INTERRUPT_ENABLE_2, + SBE_2T3E3_FRAMER_VAL_E3_RX_FEBE_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_FERF_INTERRUPT_ENABLE | + SBE_2T3E3_FRAMER_VAL_E3_RX_FRAMING_BYTE_ERROR_INTERRUPT_ENABLE); +#endif + } + + } + + if (block_status & SBE_2T3E3_FRAMER_VAL_TX_INTERRUPT_STATUS) { + status = exar7250_read(sc, SBE_2T3E3_FRAMER_REG_E3_TX_LAPD_STATUS); + dev_dbg(&sc->pdev->dev, "SBE 2T3E3: Framer interrupt E3 TX (REG[0x34] = %02X)\n", + status); + } +} diff --git a/drivers/staging/sbe-2t3e3/io.c b/drivers/staging/sbe-2t3e3/io.c new file mode 100644 index 000000000000..b458ff034067 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/io.c @@ -0,0 +1,352 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include +#include +#include "2t3e3.h" +#include "ctrl.h" + +/* All access to registers done via the 21143 on port 0 must be + * protected via the card->bootrom_lock. */ + +/* priviate define to be used here only - must be protected by card->bootrom_lock */ +#define cpld_write_nolock(channel, reg, val) \ + bootrom_write((channel), CPLD_MAP_REG(reg, channel), val) + +u32 cpld_read(struct channel *channel, u32 reg) +{ + unsigned long flags; + u32 val; + + spin_lock_irqsave(&channel->card->bootrom_lock, flags); + val = bootrom_read((channel), CPLD_MAP_REG(reg, channel)); + spin_unlock_irqrestore(&channel->card->bootrom_lock, flags); + return val; +} + +/**************************************** + * Access via BootROM port + ****************************************/ + +u32 bootrom_read(struct channel *channel, u32 reg) +{ + unsigned long addr = channel->card->bootrom_addr; + u32 result; + + /* select BootROM address */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_PROGRAMMING_ADDRESS, reg & 0x3FFFF); + + /* select reading from BootROM */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_READ_OPERATION | + SBE_2T3E3_21143_VAL_BOOT_ROM_SELECT); + + udelay(2); /* 20 PCI cycles */ + + /* read from BootROM */ + result = dc_read(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT) & 0xff; + + /* reset CSR9 */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0); + + return result; +} + +void bootrom_write(struct channel *channel, u32 reg, u32 val) +{ + unsigned long addr = channel->card->bootrom_addr; + + /* select BootROM address */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_PROGRAMMING_ADDRESS, reg & 0x3FFFF); + + /* select writting to BootROM */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_WRITE_OPERATION | + SBE_2T3E3_21143_VAL_BOOT_ROM_SELECT | + (val & 0xff)); + + udelay(2); /* 20 PCI cycles */ + + /* reset CSR9 */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0); +} + + +/**************************************** + * Access via Serial I/O port + ****************************************/ + +static u32 serialrom_read_bit(struct channel *channel) +{ + unsigned long addr = channel->card->bootrom_addr; + u32 bit; + + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_READ_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CLOCK | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock high */ + + bit = (dc_read(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT) & + SBE_2T3E3_21143_VAL_SERIAL_ROM_DATA_OUT) > 0 ? 1 : 0; + + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_READ_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */ + + return bit; +} + +static void serialrom_write_bit(struct channel *channel, u32 bit) +{ + unsigned long addr = channel->card->bootrom_addr; + u32 lastbit = -1; + + bit &= 1; + + if (bit != lastbit) { + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_WRITE_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT | + (bit << 2)); /* clock low */ + + lastbit = bit; + } + + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_WRITE_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CLOCK | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT | + (bit << 2)); /* clock high */ + + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_WRITE_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT | + (bit << 2)); /* clock low */ +} + +/**************************************** + * Access to SerialROM (eeprom) + ****************************************/ + +u32 t3e3_eeprom_read_word(struct channel *channel, u32 address) +{ + unsigned long addr = channel->card->bootrom_addr; + u32 i, val; + unsigned long flags; + + address &= 0x3f; + + spin_lock_irqsave(&channel->card->bootrom_lock, flags); + + /* select correct Serial Chip */ + cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, + SBE_2T3E3_CPLD_VAL_EEPROM_SELECT); + + /* select reading from Serial I/O Bus */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_READ_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */ + + /* select read operation */ + serialrom_write_bit(channel, 0); + serialrom_write_bit(channel, 1); + serialrom_write_bit(channel, 1); + serialrom_write_bit(channel, 0); + + for (i = 0x20; i; i >>= 1) + serialrom_write_bit(channel, address & i ? 1 : 0); + + val = 0; + for (i = 0x8000; i; i >>= 1) + val |= (serialrom_read_bit(channel) ? i : 0); + + /* Reset 21143's CSR9 */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_READ_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0); + + /* Unselect Serial Chip */ + cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, 0); + + spin_unlock_irqrestore(&channel->card->bootrom_lock, flags); + + return ntohs(val); +} + + +/**************************************** + * Access to Framer + ****************************************/ + +u32 exar7250_read(struct channel *channel, u32 reg) +{ + u32 result; + unsigned long flags; + +#if 0 + switch (reg) { + case SBE_2T3E3_FRAMER_REG_OPERATING_MODE: + return channel->framer_regs[reg]; + break; + default: + } +#endif + + spin_lock_irqsave(&channel->card->bootrom_lock, flags); + + result = bootrom_read(channel, cpld_reg_map[SBE_2T3E3_CPLD_REG_FRAMER_BASE_ADDRESS] + [channel->h.slot] + (t3e3_framer_reg_map[reg] << 2)); + + spin_unlock_irqrestore(&channel->card->bootrom_lock, flags); + + return result; +} + +void exar7250_write(struct channel *channel, u32 reg, u32 val) +{ + unsigned long flags; + + val &= 0xff; + channel->framer_regs[reg] = val; + + spin_lock_irqsave(&channel->card->bootrom_lock, flags); + + bootrom_write(channel, cpld_reg_map[SBE_2T3E3_CPLD_REG_FRAMER_BASE_ADDRESS] + [channel->h.slot] + (t3e3_framer_reg_map[reg] << 2), val); + + spin_unlock_irqrestore(&channel->card->bootrom_lock, flags); +} + + +/**************************************** + * Access to LIU + ****************************************/ + +u32 exar7300_read(struct channel *channel, u32 reg) +{ + unsigned long addr = channel->card->bootrom_addr, flags; + u32 i, val; + +#if 0 + switch (reg) { + case SBE_2T3E3_LIU_REG_REG1: + case SBE_2T3E3_LIU_REG_REG2: + case SBE_2T3E3_LIU_REG_REG3: + case SBE_2T3E3_LIU_REG_REG4: + return channel->liu_regs[reg]; + break; + default: + } +#endif + + /* select correct Serial Chip */ + + spin_lock_irqsave(&channel->card->bootrom_lock, flags); + + cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, + cpld_val_map[SBE_2T3E3_CPLD_VAL_LIU_SELECT][channel->h.slot]); + + /* select reading from Serial I/O Bus */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_READ_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */ + + /* select read operation */ + serialrom_write_bit(channel, 1); + + /* Exar7300 register address is 4 bit long */ + reg = t3e3_liu_reg_map[reg]; + for (i = 0; i < 4; i++, reg >>= 1) /* 4 bits of SerialROM address */ + serialrom_write_bit(channel, reg & 1); + for (i = 0; i < 3; i++) /* remaining 3 bits of SerialROM address */ + serialrom_write_bit(channel, 0); + + val = 0; /* Exar7300 register value is 5 bit long */ + for (i = 0; i < 8; i++) /* 8 bits of SerialROM value */ + val += (serialrom_read_bit(channel) << i); + + /* Reset 21143's CSR9 */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_READ_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0); + + /* Unselect Serial Chip */ + cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, 0); + + spin_unlock_irqrestore(&channel->card->bootrom_lock, flags); + + return val; +} + +void exar7300_write(struct channel *channel, u32 reg, u32 val) +{ + unsigned long addr = channel->card->bootrom_addr, flags; + u32 i; + + channel->liu_regs[reg] = val; + + /* select correct Serial Chip */ + + spin_lock_irqsave(&channel->card->bootrom_lock, flags); + + cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, + cpld_val_map[SBE_2T3E3_CPLD_VAL_LIU_SELECT][channel->h.slot]); + + /* select writting to Serial I/O Bus */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_WRITE_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */ + + /* select write operation */ + serialrom_write_bit(channel, 0); + + /* Exar7300 register address is 4 bit long */ + reg = t3e3_liu_reg_map[reg]; + for (i = 0; i < 4; i++) { /* 4 bits */ + serialrom_write_bit(channel, reg & 1); + reg >>= 1; + } + for (i = 0; i < 3; i++) /* remaining 3 bits of SerialROM address */ + serialrom_write_bit(channel, 0); + + /* Exar7300 register value is 5 bit long */ + for (i = 0; i < 5; i++) { + serialrom_write_bit(channel, val & 1); + val >>= 1; + } + for (i = 0; i < 3; i++) /* remaining 3 bits of SerialROM value */ + serialrom_write_bit(channel, 0); + + /* Reset 21143_CSR9 */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, + SBE_2T3E3_21143_VAL_WRITE_OPERATION | + SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT | + SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT); /* clock low */ + dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0); + + /* Unselect Serial Chip */ + cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, 0); + + spin_unlock_irqrestore(&channel->card->bootrom_lock, flags); +} diff --git a/drivers/staging/sbe-2t3e3/main.c b/drivers/staging/sbe-2t3e3/main.c new file mode 100644 index 000000000000..f3dbef6b0eef --- /dev/null +++ b/drivers/staging/sbe-2t3e3/main.c @@ -0,0 +1,171 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include +#include +#include "2t3e3.h" + +void t3e3_init(struct channel *sc) +{ + cpld_init(sc); + dc_reset(sc); + dc_init(sc); + exar7250_init(sc); + exar7300_init(sc); +} + +int t3e3_if_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct channel *sc = dev_to_priv(dev); + u32 current_write, last_write; + unsigned long flags; + struct sk_buff *skb2; + + if (skb == NULL) { + sc->s.out_errors++; + return 0; + } + + if (sc->p.transmitter_on != SBE_2T3E3_ON) { + sc->s.out_errors++; + sc->s.out_dropped++; + dev_kfree_skb_any(skb); + return 0; + } + + if (sc->s.OOF && sc->p.loopback == SBE_2T3E3_LOOPBACK_NONE) { + sc->s.out_dropped++; + dev_kfree_skb_any(skb); + return 0; + } + + spin_lock_irqsave(&sc->ether.tx_lock, flags); + + current_write = sc->ether.tx_ring_current_write; + for (skb2 = skb; skb2 != NULL; skb2 = NULL) { + if (skb2->len) { + if ((sc->ether.tx_ring[current_write].tdes1 & + SBE_2T3E3_TX_DESC_BUFFER_1_SIZE) > 0) + break; + current_write = (current_write + 1) % SBE_2T3E3_TX_DESC_RING_SIZE; + /* + * Leave at least 1 tx desc free so that dc_intr_tx() can + * identify empty list + */ + if (current_write == sc->ether.tx_ring_current_read) + break; + } + } + if (skb2 != NULL) { + netif_stop_queue(sc->dev); + sc->ether.tx_full = 1; + dev_dbg(&sc->pdev->dev, "SBE 2T3E3: out of descriptors\n"); + spin_unlock_irqrestore(&sc->ether.tx_lock, flags); + return NETDEV_TX_BUSY; + } + + current_write = last_write = sc->ether.tx_ring_current_write; + dev_dbg(&sc->pdev->dev, "sending mbuf (current_write = %d)\n", + current_write); + + for (skb2 = skb; skb2 != NULL; skb2 = NULL) { + if (skb2->len) { + dev_dbg(&sc->pdev->dev, + "sending mbuf (len = %d, next = %p)\n", + skb2->len, NULL); + + sc->ether.tx_free_cnt--; + sc->ether.tx_ring[current_write].tdes0 = 0; + sc->ether.tx_ring[current_write].tdes1 &= + SBE_2T3E3_TX_DESC_END_OF_RING | + SBE_2T3E3_TX_DESC_SECOND_ADDRESS_CHAINED; +/* DISABLE_PADDING sometimes gets lost somehow, hands off... */ + sc->ether.tx_ring[current_write].tdes1 |= + SBE_2T3E3_TX_DESC_DISABLE_PADDING | skb2->len; + + if (current_write == sc->ether.tx_ring_current_write) { + sc->ether.tx_ring[current_write].tdes1 |= + SBE_2T3E3_TX_DESC_FIRST_SEGMENT; + } else { + sc->ether.tx_ring[current_write].tdes0 = + SBE_2T3E3_TX_DESC_21143_OWN; + } + + sc->ether.tx_ring[current_write].tdes2 = virt_to_phys(skb2->data); + sc->ether.tx_data[current_write] = NULL; + + last_write = current_write; + current_write = (current_write + 1) % SBE_2T3E3_TX_DESC_RING_SIZE; + } + } + + sc->ether.tx_data[last_write] = skb; + sc->ether.tx_ring[last_write].tdes1 |= + SBE_2T3E3_TX_DESC_LAST_SEGMENT | + SBE_2T3E3_TX_DESC_INTERRUPT_ON_COMPLETION; + sc->ether.tx_ring[sc->ether.tx_ring_current_write].tdes0 |= + SBE_2T3E3_TX_DESC_21143_OWN; + sc->ether.tx_ring_current_write = current_write; + + dev_dbg(&sc->pdev->dev, "txput: tdes0 = %08X tdes1 = %08X\n", + sc->ether.tx_ring[last_write].tdes0, + sc->ether.tx_ring[last_write].tdes1); + + dc_write(sc->addr, SBE_2T3E3_21143_REG_TRANSMIT_POLL_DEMAND, + 0xffffffff); + + spin_unlock_irqrestore(&sc->ether.tx_lock, flags); + return 0; +} + + +void t3e3_read_card_serial_number(struct channel *sc) +{ + u32 i; + + for (i = 0; i < 3; i++) + sc->ether.card_serial_number[i] = t3e3_eeprom_read_word(sc, 10 + i); + + printk(KERN_INFO "SBE wanPMC-2T3E3 serial number: %04X%04X%04X\n", + sc->ether.card_serial_number[0], sc->ether.card_serial_number[1], + sc->ether.card_serial_number[2]); +} + +/* + bit 0 led1 (green) + bit 1 led1 (yellow) + + bit 2 led2 (green) + bit 3 led2 (yellow) + + bit 4 led3 (green) + bit 5 led3 (yellow) + + bit 6 led4 (green) + bit 7 led4 (yellow) +*/ + +void update_led(struct channel *sc, int blinker) +{ + int leds; + if (sc->s.LOS) + leds = 0; /* led1 = off */ + else if (sc->s.OOF) + leds = 2; /* led1 = yellow */ + else if ((blinker & 1) && sc->rcv_count) { + leds = 0; /* led1 = off */ + sc->rcv_count = 0; + } else + leds = 1; /* led1 = green */ + cpld_write(sc, SBE_2T3E3_CPLD_REG_LEDR, leds); + sc->leds = leds; +} diff --git a/drivers/staging/sbe-2t3e3/maps.c b/drivers/staging/sbe-2t3e3/maps.c new file mode 100644 index 000000000000..7084fbe7b794 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/maps.c @@ -0,0 +1,104 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include +#include "2t3e3.h" + +const u32 cpld_reg_map[][2] = +{ + { 0x0000, 0x0080 }, /* 0 - Port Control Register A (PCRA) */ + { 0x0004, 0x0084 }, /* 1 - Port Control Register B (PCRB) */ + { 0x0008, 0x0088 }, /* 2 - LCV Count Register (PLCR) */ + { 0x000c, 0x008c }, /* 3 - LCV Threshold register (PLTR) */ + { 0x0010, 0x0090 }, /* 4 - Payload Fill Register (PPFR) */ + { 0x0200, 0x0200 }, /* 5 - Board ID / FPGA Programming Status Register */ + { 0x0204, 0x0204 }, /* 6 - FPGA Version Register */ + { 0x0800, 0x1000 }, /* 7 - Framer Registers Base Address */ + { 0x2000, 0x2000 }, /* 8 - Serial Chip Select Register */ + { 0x2004, 0x2004 }, /* 9 - Static Reset Register */ + { 0x2008, 0x2008 }, /* 10 - Pulse Reset Register */ + { 0x200c, 0x200c }, /* 11 - FPGA Reconfiguration Register */ + { 0x2010, 0x2014 }, /* 12 - LED Register (LEDR) */ + { 0x2018, 0x201c }, /* 13 - LIU Control and Status Register (PISCR) */ + { 0x2020, 0x2024 }, /* 14 - Interrupt Enable Register (PIER) */ + { 0x0068, 0x00e8 }, /* 15 - Port Control Register C (PCRC) */ + { 0x006c, 0x00ec }, /* 16 - Port Bandwidth Start (PBWF) */ + { 0x0070, 0x00f0 }, /* 17 - Port Bandwidth Stop (PBWL) */ +}; + +const u32 cpld_val_map[][2] = +{ + { 0x01, 0x02 }, /* LIU1 / LIU2 select for Serial Chip Select */ + { 0x04, 0x08 }, /* DAC1 / DAC2 select for Serial Chip Select */ + { 0x00, 0x04 }, /* LOOP1 / LOOP2 - select of loop timing source */ + { 0x01, 0x02 } /* PORT1 / PORT2 - select LIU and Framer for reset */ +}; + +const u32 t3e3_framer_reg_map[] = { + 0x00, /* 0 - OPERATING_MODE */ + 0x01, /* 1 - IO_CONTROL */ + 0x04, /* 2 - BLOCK_INTERRUPT_ENABLE */ + 0x05, /* 3 - BLOCK_INTERRUPT_STATUS */ + 0x10, /* 4 - T3_RX_CONFIGURATION_STATUS, E3_RX_CONFIGURATION_STATUS_1 */ + 0x11, /* 5 - T3_RX_STATUS, E3_RX_CONFIGURATION_STATUS_2 */ + 0x12, /* 6 - T3_RX_INTERRUPT_ENABLE, E3_RX_INTERRUPT_ENABLE_1 */ + 0x13, /* 7 - T3_RX_INTERRUPT_STATUS, E3_RX_INTERRUPT_ENABLE_2 */ + 0x14, /* 8 - T3_RX_SYNC_DETECT_ENABLE, E3_RX_INTERRUPT_STATUS_1 */ + 0x15, /* 9 - E3_RX_INTERRUPT_STATUS_2 */ + 0x16, /* 10 - T3_RX_FEAC */ + 0x17, /* 11 - T3_RX_FEAC_INTERRUPT_ENABLE_STATUS */ + 0x18, /* 12 - T3_RX_LAPD_CONTROL, E3_RX_LAPD_CONTROL */ + 0x19, /* 13 - T3_RX_LAPD_STATUS, E3_RX_LAPD_STATUS */ + 0x1a, /* 14 - E3_RX_NR_BYTE, E3_RX_SERVICE_BITS */ + 0x1b, /* 15 - E3_RX_GC_BYTE */ + 0x30, /* 16 - T3_TX_CONFIGURATION, E3_TX_CONFIGURATION */ + 0x31, /* 17 - T3_TX_FEAC_CONFIGURATION_STATUS */ + 0x32, /* 18 - T3_TX_FEAC */ + 0x33, /* 19 - T3_TX_LAPD_CONFIGURATION, E3_TX_LAPD_CONFIGURATION */ + 0x34, /* 20 - T3_TX_LAPD_STATUS, E3_TX_LAPD_STATUS_INTERRUPT */ + 0x35, /* 21 - T3_TX_MBIT_MASK, E3_TX_GC_BYTE, E3_TX_SERVICE_BITS */ + 0x36, /* 22 - T3_TX_FBIT_MASK, E3_TX_MA_BYTE */ + 0x37, /* 23 - T3_TX_FBIT_MASK_2, E3_TX_NR_BYTE */ + 0x38, /* 24 - T3_TX_FBIT_MASK_3 */ + 0x48, /* 25 - E3_TX_FA1_ERROR_MASK, E3_TX_FAS_ERROR_MASK_UPPER */ + 0x49, /* 26 - E3_TX_FA2_ERROR_MASK, E3_TX_FAS_ERROR_MASK_LOWER */ + 0x4a, /* 27 - E3_TX_BIP8_MASK, E3_TX_BIP4_MASK */ + 0x50, /* 28 - PMON_LCV_EVENT_COUNT_MSB */ + 0x51, /* 29 - PMON_LCV_EVENT_COUNT_LSB */ + 0x52, /* 30 - PMON_FRAMING_BIT_ERROR_EVENT_COUNT_MSB */ + 0x53, /* 31 - PMON_FRAMING_BIT_ERROR_EVENT_COUNT_LSB */ + 0x54, /* 32 - PMON_PARITY_ERROR_EVENT_COUNT_MSB */ + 0x55, /* 33 - PMON_PARITY_ERROR_EVENT_COUNT_LSB */ + 0x56, /* 34 - PMON_FEBE_EVENT_COUNT_MSB */ + 0x57, /* 35 - PMON_FEBE_EVENT_COUNT_LSB */ + 0x58, /* 36 - PMON_CP_BIT_ERROR_EVENT_COUNT_MSB */ + 0x59, /* 37 - PMON_CP_BIT_ERROR_EVENT_COUNT_LSB */ + 0x6c, /* 38 - PMON_HOLDING_REGISTER */ + 0x6d, /* 39 - ONE_SECOND_ERROR_STATUS */ + 0x6e, /* 40 - LCV_ONE_SECOND_ACCUMULATOR_MSB */ + 0x6f, /* 41 - LCV_ONE_SECOND_ACCUMULATOR_LSB */ + 0x70, /* 42 - FRAME_PARITY_ERROR_ONE_SECOND_ACCUMULATOR_MSB */ + 0x71, /* 43 - FRAME_PARITY_ERROR_ONE_SECOND_ACCUMULATOR_LSB */ + 0x72, /* 44 - FRAME_CP_BIT_ERROR_ONE_SECOND_ACCUMULATOR_MSB */ + 0x73, /* 45 - FRAME_CP_BIT_ERROR_ONE_SECOND_ACCUMULATOR_LSB */ + 0x80, /* 46 - LINE_INTERFACE_DRIVE */ + 0x81 /* 47 - LINE_INTERFACE_SCAN */ +}; + +const u32 t3e3_liu_reg_map[] = +{ + 0x00, /* REG0 */ + 0x01, /* REG1 */ + 0x02, /* REG2 */ + 0x03, /* REG3 */ + 0x04 /* REG4 */ +}; diff --git a/drivers/staging/sbe-2t3e3/module.c b/drivers/staging/sbe-2t3e3/module.c new file mode 100644 index 000000000000..e87fe81f6bb3 --- /dev/null +++ b/drivers/staging/sbe-2t3e3/module.c @@ -0,0 +1,210 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "2t3e3.h" + +static void check_leds(unsigned long arg) +{ + struct card *card = (struct card *)arg; + struct channel *channel0 = &card->channels[0]; + static int blinker; + + update_led(channel0, ++blinker); + if (has_two_ports(channel0->pdev)) + update_led(&card->channels[1], blinker); + + card->timer.expires = jiffies + HZ / 10; + add_timer(&card->timer); +} + +static void t3e3_remove_channel(struct channel *channel) +{ + struct pci_dev *pdev = channel->pdev; + struct net_device *dev = channel->dev; + + /* system hangs if board asserts irq while module is unloaded */ + cpld_stop_intr(channel); + free_irq(dev->irq, dev); + dc_drop_descriptor_list(channel); + unregister_hdlc_device(dev); + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static int __devinit t3e3_init_channel(struct channel *channel, struct pci_dev *pdev, struct card *card) +{ + struct net_device *dev; + unsigned int val; + int err; + + err = pci_enable_device(pdev); + if (err) + return err; + + err = pci_request_regions(pdev, "SBE 2T3E3"); + if (err) + goto disable; + + dev = alloc_hdlcdev(channel); + if (!dev) { + printk(KERN_ERR "SBE 2T3E3" ": Out of memory\n"); + goto free_regions; + } + + t3e3_sc_init(channel); + dev_to_priv(dev) = channel; + + channel->pdev = pdev; + channel->dev = dev; + channel->card = card; + channel->addr = pci_resource_start(pdev, 0); + if (pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P1) + channel->h.slot = 1; + else + channel->h.slot = 0; + + if (setup_device(dev, channel)) + goto free_regions; + + pci_read_config_dword(channel->pdev, 0x40, &val); /* mask sleep mode */ + pci_write_config_dword(channel->pdev, 0x40, val & 0x3FFFFFFF); + + pci_read_config_byte(channel->pdev, PCI_CACHE_LINE_SIZE, &channel->h.cache_size); + pci_read_config_dword(channel->pdev, PCI_COMMAND, &channel->h.command); + t3e3_init(channel); + + if (request_irq(dev->irq, &t3e3_intr, IRQF_SHARED, dev->name, dev)) { + printk(KERN_WARNING "%s: could not get irq: %d\n", dev->name, dev->irq); + goto free_regions; + } + + pci_set_drvdata(pdev, channel); + return 0; + +free_regions: + pci_release_regions(pdev); +disable: + pci_disable_device(pdev); + return err; +} + +static void __devexit t3e3_remove_card(struct pci_dev *pdev) +{ + struct channel *channel0 = pci_get_drvdata(pdev); + struct card *card = channel0->card; + + del_timer(&card->timer); + if (has_two_ports(channel0->pdev)) { + t3e3_remove_channel(&card->channels[1]); + pci_dev_put(card->channels[1].pdev); + } + t3e3_remove_channel(channel0); + kfree(card); +} + +static int __devinit t3e3_init_card(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + /* pdev points to channel #0 */ + struct pci_dev *pdev1 = NULL; + struct card *card; + int channels = 1, err; + + if (has_two_ports(pdev)) { + while ((pdev1 = pci_get_subsys(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, + PCI_VENDOR_ID_SBE, PCI_SUBDEVICE_ID_SBE_2T3E3_P1, + pdev1))) + if (pdev1->bus == pdev->bus && + pdev1->devfn == pdev->devfn + 8 /* next device on the same bus */) + break; /* found the second channel */ + + if (!pdev1) { + printk(KERN_ERR "SBE 2T3E3" ": Can't find the second channel\n"); + return -EFAULT; + } + channels = 2; + /* holds the reference for pdev1 */ + } + + card = kzalloc(sizeof(struct card) + channels * sizeof(struct channel), GFP_KERNEL); + if (!card) { + printk(KERN_ERR "SBE 2T3E3" ": Out of memory\n"); + return -ENOBUFS; + } + + spin_lock_init(&card->bootrom_lock); + card->bootrom_addr = pci_resource_start(pdev, 0); + + err = t3e3_init_channel(&card->channels[0], pdev, card); + if (err) + goto free_card; + + if (channels == 2) { + err = t3e3_init_channel(&card->channels[1], pdev1, card); + if (err) { + t3e3_remove_channel(&card->channels[0]); + goto free_card; + } + } + + /* start LED timer */ + init_timer(&card->timer); + card->timer.function = check_leds; + card->timer.expires = jiffies + HZ / 10; + card->timer.data = (unsigned long)card; + add_timer(&card->timer); + return 0; + +free_card: + kfree(card); + return err; +} + +static struct pci_device_id t3e3_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, + PCI_VENDOR_ID_SBE, PCI_SUBDEVICE_ID_SBE_T3E3, 0, 0, 0 }, + { PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, + PCI_VENDOR_ID_SBE, PCI_SUBDEVICE_ID_SBE_2T3E3_P0, 0, 0, 0 }, + /* channel 1 will be initialized after channel 0 */ + { 0, } +}; + +static struct pci_driver t3e3_pci_driver = { + .name = "SBE T3E3", + .id_table = t3e3_pci_tbl, + .probe = t3e3_init_card, + .remove = t3e3_remove_card, +}; + +static int __init t3e3_init_module(void) +{ + return pci_register_driver(&t3e3_pci_driver); +} + +static void __exit t3e3_cleanup_module(void) +{ + pci_unregister_driver(&t3e3_pci_driver); +} + +module_init(t3e3_init_module); +module_exit(t3e3_cleanup_module); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, t3e3_pci_tbl); diff --git a/drivers/staging/sbe-2t3e3/netdev.c b/drivers/staging/sbe-2t3e3/netdev.c new file mode 100644 index 000000000000..c7b5e8bb04ff --- /dev/null +++ b/drivers/staging/sbe-2t3e3/netdev.c @@ -0,0 +1,142 @@ +/* + * SBE 2T3E3 synchronous serial card driver for Linux + * + * Copyright (C) 2009-2010 Krzysztof Halasa + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License + * as published by the Free Software Foundation. + * + * This code is based on a driver written by SBE Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "2t3e3.h" + +int t3e3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct channel *sc = dev_to_priv(dev); + int cmd_2t3e3, len, rlen; + t3e3_param_t param; + t3e3_resp_t resp; + void *data = ifr->ifr_data + sizeof(cmd_2t3e3) + sizeof(len); + + if (cmd == SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + if (cmd != SIOCDEVPRIVATE + 15) + return -EINVAL; + + if (copy_from_user(&cmd_2t3e3, ifr->ifr_data, sizeof(cmd_2t3e3))) + return -EFAULT; + if (copy_from_user(&len, ifr->ifr_data + sizeof(cmd_2t3e3), sizeof(len))) + return -EFAULT; + + if (len > sizeof(param)) + return -EFAULT; + + if (len) + if (copy_from_user(¶m, data, len)) + return -EFAULT; + + t3e3_if_config(sc, cmd_2t3e3, (char *)¶m, &resp, &rlen); + + if (rlen) + if (copy_to_user(data, &resp, rlen)) + return -EFAULT; + + return 0; +} + +static struct net_device_stats* t3e3_get_stats(struct net_device *dev) +{ + struct net_device_stats *nstats = &dev->stats; + struct channel *sc = dev_to_priv(dev); + t3e3_stats_t *stats = &sc->s; + + memset(nstats, 0, sizeof(struct net_device_stats)); + nstats->rx_packets = stats->in_packets; + nstats->tx_packets = stats->out_packets; + nstats->rx_bytes = stats->in_bytes; + nstats->tx_bytes = stats->out_bytes; + + nstats->rx_errors = stats->in_errors; + nstats->tx_errors = stats->out_errors; + nstats->rx_crc_errors = stats->in_error_crc; + + + nstats->rx_dropped = stats->in_dropped; + nstats->tx_dropped = stats->out_dropped; + nstats->tx_carrier_errors = stats->out_error_lost_carr + + stats->out_error_no_carr; + + return nstats; +} + +int t3e3_open(struct net_device *dev) +{ + struct channel *sc = dev_to_priv(dev); + int ret = hdlc_open(dev); + + if (ret) + return ret; + + sc->r.flags |= SBE_2T3E3_FLAG_NETWORK_UP; + dc_start(dev_to_priv(dev)); + netif_start_queue(dev); + try_module_get(THIS_MODULE); + return 0; +} + +int t3e3_close(struct net_device *dev) +{ + struct channel *sc = dev_to_priv(dev); + hdlc_close(dev); + netif_stop_queue(dev); + dc_stop(sc); + sc->r.flags &= ~SBE_2T3E3_FLAG_NETWORK_UP; + module_put(THIS_MODULE); + return 0; +} + +static int t3e3_attach(struct net_device *dev, unsigned short foo1, + unsigned short foo2) +{ + return 0; +} + +static const struct net_device_ops t3e3_ops = { + .ndo_open = t3e3_open, + .ndo_stop = t3e3_close, + .ndo_change_mtu = hdlc_change_mtu, + .ndo_start_xmit = hdlc_start_xmit, + .ndo_do_ioctl = t3e3_ioctl, + .ndo_get_stats = t3e3_get_stats, +}; + +int setup_device(struct net_device *dev, struct channel *sc) +{ + hdlc_device *hdlc = dev_to_hdlc(dev); + int retval; + + dev->base_addr = pci_resource_start(sc->pdev, 0); + dev->irq = sc->pdev->irq; + dev->netdev_ops = &t3e3_ops; + dev->tx_queue_len = 100; + hdlc->xmit = t3e3_if_start_xmit; + hdlc->attach = t3e3_attach; + if ((retval = register_hdlc_device(dev))) { + dev_err(&sc->pdev->dev, "error registering HDLC device\n"); + return retval; + } + return 0; +} -- 2.20.1