From 9169827b7ad7d4dcae635a051d32cc7421ed8202 Mon Sep 17 00:00:00 2001 From: Stefan Assmann Date: Mon, 27 Jun 2016 15:03:43 +0200 Subject: [PATCH] i40e: add missing link advertise setting Adding the missing link advertise for some X710 NICs. This can be observed by simply calling ethtool on the interface. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: Not reported [...] With fix applied. root@rhel7:~ # ethtool eth0 Settings for eth0: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: Symmetric Supports auto-negotiation: No Advertised link modes: 10000baseT/Full [...] Signed-off-by: Stefan Assmann Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_ethtool.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index 0cfde30e642b..c912e041d102 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -461,6 +461,7 @@ static void i40e_get_settings_link_up(struct i40e_hw *hw, case I40E_PHY_TYPE_10GBASE_SFPP_CU: case I40E_PHY_TYPE_10GBASE_AOC: ecmd->supported = SUPPORTED_10000baseT_Full; + ecmd->advertising = SUPPORTED_10000baseT_Full; break; case I40E_PHY_TYPE_SGMII: ecmd->supported = SUPPORTED_Autoneg | -- 2.20.1