From 90e9311a34e7b88f246a6d741ef70e3fdba15a34 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Thu, 23 Jun 2016 17:34:39 +0100 Subject: [PATCH] MIPS; KVM: Convert exception entry to uasm MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Convert the whole of locore.S (assembly to enter guest and handle exception entry) to be generated dynamically with uasm. This is done with minimal changes to the resulting code. The main changes are: - Some constants are generated by uasm using LUI+ADDIU instead of LUI+ORI. - Loading of lo and hi are swapped around in vcpu_run but not when resuming the guest after an exit. Both bits of logic are now generated by the same code. - Register MOVEs in uasm use different ADDU operand ordering to GNU as, putting zero register into rs instead of rt. - The JALR.HB to call the C exit handler is switched to JALR, since the hazard barrier would appear to be unnecessary. This will allow further optimisation in the future to dynamically handle the capabilities of the CPU. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: Radim KrÄmář Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini --- arch/mips/include/asm/kvm_host.h | 8 +- arch/mips/kvm/Kconfig | 1 + arch/mips/kvm/Makefile | 2 +- arch/mips/kvm/entry.c | 622 +++++++++++++++++++++++++++++++ arch/mips/kvm/interrupt.h | 4 - arch/mips/kvm/locore.S | 602 ------------------------------ arch/mips/kvm/mips.c | 37 +- 7 files changed, 642 insertions(+), 634 deletions(-) create mode 100644 arch/mips/kvm/entry.c delete mode 100644 arch/mips/kvm/locore.S diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index b0773c6d622f..2e76e899079c 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -533,8 +533,12 @@ int kvm_mips_emulation_init(struct kvm_mips_callbacks **install_callbacks); /* Debug: dump vcpu state */ int kvm_arch_vcpu_dump_regs(struct kvm_vcpu *vcpu); -/* Trampoline ASM routine to start running in "Guest" context */ -extern int __kvm_mips_vcpu_run(struct kvm_run *run, struct kvm_vcpu *vcpu); +extern int kvm_mips_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu); + +/* Building of entry/exception code */ +void *kvm_mips_build_vcpu_run(void *addr); +void *kvm_mips_build_exception(void *addr); +void *kvm_mips_build_exit(void *addr); /* FPU/MSA context management */ void __kvm_save_fpu(struct kvm_vcpu_arch *vcpu); diff --git a/arch/mips/kvm/Kconfig b/arch/mips/kvm/Kconfig index 2ae12825529f..7c56d6b124d1 100644 --- a/arch/mips/kvm/Kconfig +++ b/arch/mips/kvm/Kconfig @@ -17,6 +17,7 @@ if VIRTUALIZATION config KVM tristate "Kernel-based Virtual Machine (KVM) support" depends on HAVE_KVM + select EXPORT_UASM select PREEMPT_NOTIFIERS select ANON_INODES select KVM_MMIO diff --git a/arch/mips/kvm/Makefile b/arch/mips/kvm/Makefile index 0aabe40fcac9..847429de780d 100644 --- a/arch/mips/kvm/Makefile +++ b/arch/mips/kvm/Makefile @@ -7,7 +7,7 @@ EXTRA_CFLAGS += -Ivirt/kvm -Iarch/mips/kvm common-objs-$(CONFIG_CPU_HAS_MSA) += msa.o -kvm-objs := $(common-objs-y) mips.o emulate.o locore.o \ +kvm-objs := $(common-objs-y) mips.o emulate.o entry.o \ interrupt.o stats.o commpage.o \ dyntrans.o trap_emul.o fpu.o kvm-objs += mmu.o diff --git a/arch/mips/kvm/entry.c b/arch/mips/kvm/entry.c new file mode 100644 index 000000000000..9a18b4939b35 --- /dev/null +++ b/arch/mips/kvm/entry.c @@ -0,0 +1,622 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Generation of main entry point for the guest, exception handling. + * + * Copyright (C) 2012 MIPS Technologies, Inc. + * Authors: Sanjay Lal + * + * Copyright (C) 2016 Imagination Technologies Ltd. + */ + +#include +#include +#include +#include + +/* Register names */ +#define ZERO 0 +#define AT 1 +#define V0 2 +#define V1 3 +#define A0 4 +#define A1 5 + +#if _MIPS_SIM == _MIPS_SIM_ABI32 +#define T0 8 +#define T1 9 +#define T2 10 +#define T3 11 +#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ + +#if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 +#define T0 12 +#define T1 13 +#define T2 14 +#define T3 15 +#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 || _MIPS_SIM == _MIPS_SIM_NABI32 */ + +#define S0 16 +#define S1 17 +#define T9 25 +#define K0 26 +#define K1 27 +#define GP 28 +#define SP 29 +#define RA 31 + +/* Some CP0 registers */ +#define C0_HWRENA 7, 0 +#define C0_BADVADDR 8, 0 +#define C0_ENTRYHI 10, 0 +#define C0_STATUS 12, 0 +#define C0_CAUSE 13, 0 +#define C0_EPC 14, 0 +#define C0_EBASE 15, 1 +#define C0_CONFIG3 16, 3 +#define C0_CONFIG5 16, 5 +#define C0_DDATA_LO 28, 3 +#define C0_ERROREPC 30, 0 + +#define CALLFRAME_SIZ 32 + +enum label_id { + label_fpu_1 = 1, + label_msa_1, + label_return_to_host, + label_kernel_asid, +}; + +UASM_L_LA(_fpu_1) +UASM_L_LA(_msa_1) +UASM_L_LA(_return_to_host) +UASM_L_LA(_kernel_asid) + +static void *kvm_mips_build_enter_guest(void *addr); +static void *kvm_mips_build_ret_from_exit(void *addr); +static void *kvm_mips_build_ret_to_guest(void *addr); +static void *kvm_mips_build_ret_to_host(void *addr); + +/** + * kvm_mips_build_vcpu_run() - Assemble function to start running a guest VCPU. + * @addr: Address to start writing code. + * + * Assemble the start of the vcpu_run function to run a guest VCPU. The function + * conforms to the following prototype: + * + * int vcpu_run(struct kvm_run *run, struct kvm_vcpu *vcpu); + * + * The exit from the guest and return to the caller is handled by the code + * generated by kvm_mips_build_ret_to_host(). + * + * Returns: Next address after end of written function. + */ +void *kvm_mips_build_vcpu_run(void *addr) +{ + u32 *p = addr; + unsigned int i; + + /* + * A0: run + * A1: vcpu + */ + + /* k0/k1 not being used in host kernel context */ + uasm_i_addiu(&p, K1, SP, -(int)sizeof(struct pt_regs)); + for (i = 16; i < 32; ++i) { + if (i == 24) + i = 28; + UASM_i_SW(&p, i, offsetof(struct pt_regs, regs[i]), K1); + } + + /* Save hi/lo */ + uasm_i_mflo(&p, V0); + UASM_i_SW(&p, V0, offsetof(struct pt_regs, lo), K1); + uasm_i_mfhi(&p, V1); + UASM_i_SW(&p, V1, offsetof(struct pt_regs, hi), K1); + + /* Save host status */ + uasm_i_mfc0(&p, V0, C0_STATUS); + UASM_i_SW(&p, V0, offsetof(struct pt_regs, cp0_status), K1); + + /* Save DDATA_LO, will be used to store pointer to vcpu */ + uasm_i_mfc0(&p, V1, C0_DDATA_LO); + UASM_i_SW(&p, V1, offsetof(struct pt_regs, cp0_epc), K1); + + /* DDATA_LO has pointer to vcpu */ + uasm_i_mtc0(&p, A1, C0_DDATA_LO); + + /* Offset into vcpu->arch */ + uasm_i_addiu(&p, K1, A1, offsetof(struct kvm_vcpu, arch)); + + /* + * Save the host stack to VCPU, used for exception processing + * when we exit from the Guest + */ + UASM_i_SW(&p, SP, offsetof(struct kvm_vcpu_arch, host_stack), K1); + + /* Save the kernel gp as well */ + UASM_i_SW(&p, GP, offsetof(struct kvm_vcpu_arch, host_gp), K1); + + /* + * Setup status register for running the guest in UM, interrupts + * are disabled + */ + UASM_i_LA(&p, K0, ST0_EXL | KSU_USER | ST0_BEV); + uasm_i_mtc0(&p, K0, C0_STATUS); + uasm_i_ehb(&p); + + /* load up the new EBASE */ + UASM_i_LW(&p, K0, offsetof(struct kvm_vcpu_arch, guest_ebase), K1); + uasm_i_mtc0(&p, K0, C0_EBASE); + + /* + * Now that the new EBASE has been loaded, unset BEV, set + * interrupt mask as it was but make sure that timer interrupts + * are enabled + */ + uasm_i_addiu(&p, K0, ZERO, ST0_EXL | KSU_USER | ST0_IE); + uasm_i_andi(&p, V0, V0, ST0_IM); + uasm_i_or(&p, K0, K0, V0); + uasm_i_mtc0(&p, K0, C0_STATUS); + uasm_i_ehb(&p); + + p = kvm_mips_build_enter_guest(p); + + return p; +} + +/** + * kvm_mips_build_enter_guest() - Assemble code to resume guest execution. + * @addr: Address to start writing code. + * + * Assemble the code to resume guest execution. This code is common between the + * initial entry into the guest from the host, and returning from the exit + * handler back to the guest. + * + * Returns: Next address after end of written function. + */ +static void *kvm_mips_build_enter_guest(void *addr) +{ + u32 *p = addr; + unsigned int i; + struct uasm_label labels[2]; + struct uasm_reloc relocs[2]; + struct uasm_label *l = labels; + struct uasm_reloc *r = relocs; + + memset(labels, 0, sizeof(labels)); + memset(relocs, 0, sizeof(relocs)); + + /* Set Guest EPC */ + UASM_i_LW(&p, T0, offsetof(struct kvm_vcpu_arch, pc), K1); + uasm_i_mtc0(&p, T0, C0_EPC); + + /* Set the ASID for the Guest Kernel */ + UASM_i_LW(&p, T0, offsetof(struct kvm_vcpu_arch, cop0), K1); + UASM_i_LW(&p, T0, offsetof(struct mips_coproc, reg[MIPS_CP0_STATUS][0]), + T0); + uasm_i_andi(&p, T0, T0, KSU_USER | ST0_ERL | ST0_EXL); + uasm_i_xori(&p, T0, T0, KSU_USER); + uasm_il_bnez(&p, &r, T0, label_kernel_asid); + uasm_i_addiu(&p, T1, K1, + offsetof(struct kvm_vcpu_arch, guest_kernel_asid)); + /* else user */ + uasm_i_addiu(&p, T1, K1, + offsetof(struct kvm_vcpu_arch, guest_user_asid)); + uasm_l_kernel_asid(&l, p); + + /* t1: contains the base of the ASID array, need to get the cpu id */ + /* smp_processor_id */ + UASM_i_LW(&p, T2, offsetof(struct thread_info, cpu), GP); + /* x4 */ + uasm_i_sll(&p, T2, T2, 2); + UASM_i_ADDU(&p, T3, T1, T2); + UASM_i_LW(&p, K0, 0, T3); +#ifdef CONFIG_MIPS_ASID_BITS_VARIABLE + /* x sizeof(struct cpuinfo_mips)/4 */ + uasm_i_addiu(&p, T3, ZERO, sizeof(struct cpuinfo_mips)/4); + uasm_i_mul(&p, T2, T2, T3); + + UASM_i_LA_mostly(&p, AT, (long)&cpu_data[0].asid_mask); + UASM_i_ADDU(&p, AT, AT, T2); + UASM_i_LW(&p, T2, uasm_rel_lo((long)&cpu_data[0].asid_mask), AT); + uasm_i_and(&p, K0, K0, T2); +#else + uasm_i_andi(&p, K0, K0, MIPS_ENTRYHI_ASID); +#endif + uasm_i_mtc0(&p, K0, C0_ENTRYHI); + uasm_i_ehb(&p); + + /* Disable RDHWR access */ + uasm_i_mtc0(&p, ZERO, C0_HWRENA); + + /* load the guest context from VCPU and return */ + for (i = 1; i < 32; ++i) { + /* Guest k0/k1 loaded later */ + if (i == K0 || i == K1) + continue; + UASM_i_LW(&p, i, offsetof(struct kvm_vcpu_arch, gprs[i]), K1); + } + + /* Restore hi/lo */ + UASM_i_LW(&p, K0, offsetof(struct kvm_vcpu_arch, hi), K1); + uasm_i_mthi(&p, K0); + + UASM_i_LW(&p, K0, offsetof(struct kvm_vcpu_arch, lo), K1); + uasm_i_mtlo(&p, K0); + + /* Restore the guest's k0/k1 registers */ + UASM_i_LW(&p, K0, offsetof(struct kvm_vcpu_arch, gprs[K0]), K1); + UASM_i_LW(&p, K1, offsetof(struct kvm_vcpu_arch, gprs[K1]), K1); + + /* Jump to guest */ + uasm_i_eret(&p); + + uasm_resolve_relocs(relocs, labels); + + return p; +} + +/** + * kvm_mips_build_exception() - Assemble first level guest exception handler. + * @addr: Address to start writing code. + * + * Assemble exception vector code for guest execution. The generated vector will + * jump to the common exception handler generated by kvm_mips_build_exit(). + * + * Returns: Next address after end of written function. + */ +void *kvm_mips_build_exception(void *addr) +{ + u32 *p = addr; + + /* Save guest k0 */ + uasm_i_mtc0(&p, K0, C0_ERROREPC); + uasm_i_ehb(&p); + + /* Get EBASE */ + uasm_i_mfc0(&p, K0, C0_EBASE); + /* Get rid of CPUNum */ + uasm_i_srl(&p, K0, K0, 10); + uasm_i_sll(&p, K0, K0, 10); + /* Save k1 @ offset 0x3000 */ + UASM_i_SW(&p, K1, 0x3000, K0); + + /* Exception handler is installed @ offset 0x2000 */ + uasm_i_addiu(&p, K0, K0, 0x2000); + /* Jump to the function */ + uasm_i_jr(&p, K0); + uasm_i_nop(&p); + + return p; +} + +/** + * kvm_mips_build_exit() - Assemble common guest exit handler. + * @addr: Address to start writing code. + * + * Assemble the generic guest exit handling code. This is called by the + * exception vectors (generated by kvm_mips_build_exception()), and calls + * kvm_mips_handle_exit(), then either resumes the guest or returns to the host + * depending on the return value. + * + * Returns: Next address after end of written function. + */ +void *kvm_mips_build_exit(void *addr) +{ + u32 *p = addr; + unsigned int i; + struct uasm_label labels[3]; + struct uasm_reloc relocs[3]; + struct uasm_label *l = labels; + struct uasm_reloc *r = relocs; + + memset(labels, 0, sizeof(labels)); + memset(relocs, 0, sizeof(relocs)); + + /* + * Generic Guest exception handler. We end up here when the guest + * does something that causes a trap to kernel mode. + */ + + /* Get the VCPU pointer from DDATA_LO */ + uasm_i_mfc0(&p, K1, C0_DDATA_LO); + uasm_i_addiu(&p, K1, K1, offsetof(struct kvm_vcpu, arch)); + + /* Start saving Guest context to VCPU */ + for (i = 0; i < 32; ++i) { + /* Guest k0/k1 saved later */ + if (i == K0 || i == K1) + continue; + UASM_i_SW(&p, i, offsetof(struct kvm_vcpu_arch, gprs[i]), K1); + } + + /* We need to save hi/lo and restore them on the way out */ + uasm_i_mfhi(&p, T0); + UASM_i_SW(&p, T0, offsetof(struct kvm_vcpu_arch, hi), K1); + + uasm_i_mflo(&p, T0); + UASM_i_SW(&p, T0, offsetof(struct kvm_vcpu_arch, lo), K1); + + /* Finally save guest k0/k1 to VCPU */ + uasm_i_mfc0(&p, T0, C0_ERROREPC); + UASM_i_SW(&p, T0, offsetof(struct kvm_vcpu_arch, gprs[K0]), K1); + + /* Get GUEST k1 and save it in VCPU */ + uasm_i_addiu(&p, T1, ZERO, ~0x2ff); + uasm_i_mfc0(&p, T0, C0_EBASE); + uasm_i_and(&p, T0, T0, T1); + UASM_i_LW(&p, T0, 0x3000, T0); + UASM_i_SW(&p, T0, offsetof(struct kvm_vcpu_arch, gprs[K1]), K1); + + /* Now that context has been saved, we can use other registers */ + + /* Restore vcpu */ + uasm_i_mfc0(&p, A1, C0_DDATA_LO); + uasm_i_move(&p, S1, A1); + + /* Restore run (vcpu->run) */ + UASM_i_LW(&p, A0, offsetof(struct kvm_vcpu, run), A1); + /* Save pointer to run in s0, will be saved by the compiler */ + uasm_i_move(&p, S0, A0); + + /* + * Save Host level EPC, BadVaddr and Cause to VCPU, useful to process + * the exception + */ + uasm_i_mfc0(&p, K0, C0_EPC); + UASM_i_SW(&p, K0, offsetof(struct kvm_vcpu_arch, pc), K1); + + uasm_i_mfc0(&p, K0, C0_BADVADDR); + UASM_i_SW(&p, K0, offsetof(struct kvm_vcpu_arch, host_cp0_badvaddr), + K1); + + uasm_i_mfc0(&p, K0, C0_CAUSE); + uasm_i_sw(&p, K0, offsetof(struct kvm_vcpu_arch, host_cp0_cause), K1); + + /* Now restore the host state just enough to run the handlers */ + + /* Switch EBASE to the one used by Linux */ + /* load up the host EBASE */ + uasm_i_mfc0(&p, V0, C0_STATUS); + + uasm_i_lui(&p, AT, ST0_BEV >> 16); + uasm_i_or(&p, K0, V0, AT); + + uasm_i_mtc0(&p, K0, C0_STATUS); + uasm_i_ehb(&p); + + UASM_i_LA_mostly(&p, K0, (long)&ebase); + UASM_i_LW(&p, K0, uasm_rel_lo((long)&ebase), K0); + uasm_i_mtc0(&p, K0, C0_EBASE); + + /* + * If FPU is enabled, save FCR31 and clear it so that later ctc1's don't + * trigger FPE for pending exceptions. + */ + uasm_i_lui(&p, AT, ST0_CU1 >> 16); + uasm_i_and(&p, V1, V0, AT); + uasm_il_beqz(&p, &r, V1, label_fpu_1); + uasm_i_nop(&p); + uasm_i_cfc1(&p, T0, 31); + uasm_i_sw(&p, T0, offsetof(struct kvm_vcpu_arch, fpu.fcr31), K1); + uasm_i_ctc1(&p, ZERO, 31); + uasm_l_fpu_1(&l, p); + +#ifdef CONFIG_CPU_HAS_MSA + /* + * If MSA is enabled, save MSACSR and clear it so that later + * instructions don't trigger MSAFPE for pending exceptions. + */ + uasm_i_mfc0(&p, T0, C0_CONFIG3); + uasm_i_ext(&p, T0, T0, 28, 1); /* MIPS_CONF3_MSAP */ + uasm_il_beqz(&p, &r, T0, label_msa_1); + uasm_i_nop(&p); + uasm_i_mfc0(&p, T0, C0_CONFIG5); + uasm_i_ext(&p, T0, T0, 27, 1); /* MIPS_CONF5_MSAEN */ + uasm_il_beqz(&p, &r, T0, label_msa_1); + uasm_i_nop(&p); + uasm_i_cfcmsa(&p, T0, MSA_CSR); + uasm_i_sw(&p, T0, offsetof(struct kvm_vcpu_arch, fpu.msacsr), + K1); + uasm_i_ctcmsa(&p, MSA_CSR, ZERO); + uasm_l_msa_1(&l, p); +#endif + + /* Now that the new EBASE has been loaded, unset BEV and KSU_USER */ + uasm_i_addiu(&p, AT, ZERO, ~(ST0_EXL | KSU_USER | ST0_IE)); + uasm_i_and(&p, V0, V0, AT); + uasm_i_lui(&p, AT, ST0_CU0 >> 16); + uasm_i_or(&p, V0, V0, AT); + uasm_i_mtc0(&p, V0, C0_STATUS); + uasm_i_ehb(&p); + + /* Load up host GP */ + UASM_i_LW(&p, GP, offsetof(struct kvm_vcpu_arch, host_gp), K1); + + /* Need a stack before we can jump to "C" */ + UASM_i_LW(&p, SP, offsetof(struct kvm_vcpu_arch, host_stack), K1); + + /* Saved host state */ + uasm_i_addiu(&p, SP, SP, -(int)sizeof(struct pt_regs)); + + /* + * XXXKYMA do we need to load the host ASID, maybe not because the + * kernel entries are marked GLOBAL, need to verify + */ + + /* Restore host DDATA_LO */ + UASM_i_LW(&p, K0, offsetof(struct pt_regs, cp0_epc), SP); + uasm_i_mtc0(&p, K0, C0_DDATA_LO); + + /* Restore RDHWR access */ + UASM_i_LA_mostly(&p, K0, (long)&hwrena); + uasm_i_lw(&p, K0, uasm_rel_lo((long)&hwrena), K0); + uasm_i_mtc0(&p, K0, C0_HWRENA); + + /* Jump to handler */ + /* + * XXXKYMA: not sure if this is safe, how large is the stack?? + * Now jump to the kvm_mips_handle_exit() to see if we can deal + * with this in the kernel + */ + UASM_i_LA(&p, T9, (unsigned long)kvm_mips_handle_exit); + uasm_i_jalr(&p, RA, T9); + uasm_i_addiu(&p, SP, SP, -CALLFRAME_SIZ); + + uasm_resolve_relocs(relocs, labels); + + p = kvm_mips_build_ret_from_exit(p); + + return p; +} + +/** + * kvm_mips_build_ret_from_exit() - Assemble guest exit return handler. + * @addr: Address to start writing code. + * + * Assemble the code to handle the return from kvm_mips_handle_exit(), either + * resuming the guest or returning to the host depending on the return value. + * + * Returns: Next address after end of written function. + */ +static void *kvm_mips_build_ret_from_exit(void *addr) +{ + u32 *p = addr; + struct uasm_label labels[2]; + struct uasm_reloc relocs[2]; + struct uasm_label *l = labels; + struct uasm_reloc *r = relocs; + + memset(labels, 0, sizeof(labels)); + memset(relocs, 0, sizeof(relocs)); + + /* Return from handler Make sure interrupts are disabled */ + uasm_i_di(&p, ZERO); + uasm_i_ehb(&p); + + /* + * XXXKYMA: k0/k1 could have been blown away if we processed + * an exception while we were handling the exception from the + * guest, reload k1 + */ + + uasm_i_move(&p, K1, S1); + uasm_i_addiu(&p, K1, K1, offsetof(struct kvm_vcpu, arch)); + + /* + * Check return value, should tell us if we are returning to the + * host (handle I/O etc)or resuming the guest + */ + uasm_i_andi(&p, T0, V0, RESUME_HOST); + uasm_il_bnez(&p, &r, T0, label_return_to_host); + uasm_i_nop(&p); + + p = kvm_mips_build_ret_to_guest(p); + + uasm_l_return_to_host(&l, p); + p = kvm_mips_build_ret_to_host(p); + + uasm_resolve_relocs(relocs, labels); + + return p; +} + +/** + * kvm_mips_build_ret_to_guest() - Assemble code to return to the guest. + * @addr: Address to start writing code. + * + * Assemble the code to handle return from the guest exit handler + * (kvm_mips_handle_exit()) back to the guest. + * + * Returns: Next address after end of written function. + */ +static void *kvm_mips_build_ret_to_guest(void *addr) +{ + u32 *p = addr; + + /* Put the saved pointer to vcpu (s1) back into the DDATA_LO Register */ + uasm_i_mtc0(&p, S1, C0_DDATA_LO); + + /* Load up the Guest EBASE to minimize the window where BEV is set */ + UASM_i_LW(&p, T0, offsetof(struct kvm_vcpu_arch, guest_ebase), K1); + + /* Switch EBASE back to the one used by KVM */ + uasm_i_mfc0(&p, V1, C0_STATUS); + uasm_i_lui(&p, AT, ST0_BEV >> 16); + uasm_i_or(&p, K0, V1, AT); + uasm_i_mtc0(&p, K0, C0_STATUS); + uasm_i_ehb(&p); + uasm_i_mtc0(&p, T0, C0_EBASE); + + /* Setup status register for running guest in UM */ + uasm_i_ori(&p, V1, V1, ST0_EXL | KSU_USER | ST0_IE); + UASM_i_LA(&p, AT, ~(ST0_CU0 | ST0_MX)); + uasm_i_and(&p, V1, V1, AT); + uasm_i_mtc0(&p, V1, C0_STATUS); + uasm_i_ehb(&p); + + p = kvm_mips_build_enter_guest(p); + + return p; +} + +/** + * kvm_mips_build_ret_to_host() - Assemble code to return to the host. + * @addr: Address to start writing code. + * + * Assemble the code to handle return from the guest exit handler + * (kvm_mips_handle_exit()) back to the host, i.e. to the caller of the vcpu_run + * function generated by kvm_mips_build_vcpu_run(). + * + * Returns: Next address after end of written function. + */ +static void *kvm_mips_build_ret_to_host(void *addr) +{ + u32 *p = addr; + unsigned int i; + + /* EBASE is already pointing to Linux */ + UASM_i_LW(&p, K1, offsetof(struct kvm_vcpu_arch, host_stack), K1); + uasm_i_addiu(&p, K1, K1, -(int)sizeof(struct pt_regs)); + + /* Restore host DDATA_LO */ + UASM_i_LW(&p, K0, offsetof(struct pt_regs, cp0_epc), K1); + uasm_i_mtc0(&p, K0, C0_DDATA_LO); + + /* + * r2/v0 is the return code, shift it down by 2 (arithmetic) + * to recover the err code + */ + uasm_i_sra(&p, K0, V0, 2); + uasm_i_move(&p, V0, K0); + + /* Load context saved on the host stack */ + for (i = 16; i < 31; ++i) { + if (i == 24) + i = 28; + UASM_i_LW(&p, i, offsetof(struct pt_regs, regs[i]), K1); + } + + UASM_i_LW(&p, K0, offsetof(struct pt_regs, hi), K1); + uasm_i_mthi(&p, K0); + + UASM_i_LW(&p, K0, offsetof(struct pt_regs, lo), K1); + uasm_i_mtlo(&p, K0); + + /* Restore RDHWR access */ + UASM_i_LA_mostly(&p, K0, (long)&hwrena); + uasm_i_lw(&p, K0, uasm_rel_lo((long)&hwrena), K0); + uasm_i_mtc0(&p, K0, C0_HWRENA); + + /* Restore RA, which is the address we will return to */ + UASM_i_LW(&p, RA, offsetof(struct pt_regs, regs[RA]), K1); + uasm_i_jr(&p, RA); + uasm_i_nop(&p); + + return p; +} + diff --git a/arch/mips/kvm/interrupt.h b/arch/mips/kvm/interrupt.h index d661c100b219..fb118a2c8379 100644 --- a/arch/mips/kvm/interrupt.h +++ b/arch/mips/kvm/interrupt.h @@ -28,10 +28,6 @@ #define MIPS_EXC_MAX 12 /* XXXSL More to follow */ -extern char __kvm_mips_vcpu_run_end[]; -extern char mips32_exception[], mips32_exceptionEnd[]; -extern char mips32_GuestException[], mips32_GuestExceptionEnd[]; - #define C_TI (_ULCAST_(1) << 30) #define KVM_MIPS_IRQ_DELIVER_ALL_AT_ONCE (0) diff --git a/arch/mips/kvm/locore.S b/arch/mips/kvm/locore.S deleted file mode 100644 index 698286c0f732..000000000000 --- a/arch/mips/kvm/locore.S +++ /dev/null @@ -1,602 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Main entry point for the guest, exception handling. - * - * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved. - * Authors: Sanjay Lal - */ - -#include -#include -#include -#include -#include -#include - -#define _C_LABEL(x) x -#define MIPSX(name) mips32_ ## name -#define CALLFRAME_SIZ 32 - -/* - * VECTOR - * exception vector entrypoint - */ -#define VECTOR(x, regmask) \ - .ent _C_LABEL(x),0; \ - EXPORT(x); - -#define VECTOR_END(x) \ - EXPORT(x); - -/* Overload, Danger Will Robinson!! */ -#define PT_HOST_USERLOCAL PT_EPC - -#define CP0_DDATA_LO $28,3 - -/* Resume Flags */ -#define RESUME_FLAG_HOST (1<<1) /* Resume host? */ - -#define RESUME_GUEST 0 -#define RESUME_HOST RESUME_FLAG_HOST - -/* - * __kvm_mips_vcpu_run: entry point to the guest - * a0: run - * a1: vcpu - */ - .set noreorder - -FEXPORT(__kvm_mips_vcpu_run) - /* k0/k1 not being used in host kernel context */ - INT_ADDIU k1, sp, -PT_SIZE - LONG_S $16, PT_R16(k1) - LONG_S $17, PT_R17(k1) - LONG_S $18, PT_R18(k1) - LONG_S $19, PT_R19(k1) - LONG_S $20, PT_R20(k1) - LONG_S $21, PT_R21(k1) - LONG_S $22, PT_R22(k1) - LONG_S $23, PT_R23(k1) - - LONG_S $28, PT_R28(k1) - LONG_S $29, PT_R29(k1) - LONG_S $30, PT_R30(k1) - LONG_S $31, PT_R31(k1) - - /* Save hi/lo */ - mflo v0 - LONG_S v0, PT_LO(k1) - mfhi v1 - LONG_S v1, PT_HI(k1) - - /* Save host status */ - mfc0 v0, CP0_STATUS - LONG_S v0, PT_STATUS(k1) - - /* Save DDATA_LO, will be used to store pointer to vcpu */ - mfc0 v1, CP0_DDATA_LO - LONG_S v1, PT_HOST_USERLOCAL(k1) - - /* DDATA_LO has pointer to vcpu */ - mtc0 a1, CP0_DDATA_LO - - /* Offset into vcpu->arch */ - INT_ADDIU k1, a1, VCPU_HOST_ARCH - - /* - * Save the host stack to VCPU, used for exception processing - * when we exit from the Guest - */ - LONG_S sp, VCPU_HOST_STACK(k1) - - /* Save the kernel gp as well */ - LONG_S gp, VCPU_HOST_GP(k1) - - /* - * Setup status register for running the guest in UM, interrupts - * are disabled - */ - li k0, (ST0_EXL | KSU_USER | ST0_BEV) - mtc0 k0, CP0_STATUS - ehb - - /* load up the new EBASE */ - LONG_L k0, VCPU_GUEST_EBASE(k1) - mtc0 k0, CP0_EBASE - - /* - * Now that the new EBASE has been loaded, unset BEV, set - * interrupt mask as it was but make sure that timer interrupts - * are enabled - */ - li k0, (ST0_EXL | KSU_USER | ST0_IE) - andi v0, v0, ST0_IM - or k0, k0, v0 - mtc0 k0, CP0_STATUS - ehb - - /* Set Guest EPC */ - LONG_L t0, VCPU_PC(k1) - mtc0 t0, CP0_EPC - -FEXPORT(__kvm_mips_load_asid) - /* Set the ASID for the Guest Kernel */ - PTR_L t0, VCPU_COP0(k1) - LONG_L t0, COP0_STATUS(t0) - andi t0, KSU_USER | ST0_ERL | ST0_EXL - xori t0, KSU_USER - bnez t0, 1f /* If kernel */ - INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID /* (BD) */ - INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID /* else user */ -1: - /* t1: contains the base of the ASID array, need to get the cpu id */ - LONG_L t2, TI_CPU($28) /* smp_processor_id */ - INT_SLL t2, t2, 2 /* x4 */ - REG_ADDU t3, t1, t2 - LONG_L k0, (t3) -#ifdef CONFIG_MIPS_ASID_BITS_VARIABLE - li t3, CPUINFO_SIZE/4 - mul t2, t2, t3 /* x sizeof(struct cpuinfo_mips)/4 */ - LONG_L t2, (cpu_data + CPUINFO_ASID_MASK)(t2) - and k0, k0, t2 -#else - andi k0, k0, MIPS_ENTRYHI_ASID -#endif - mtc0 k0, CP0_ENTRYHI - ehb - - /* Disable RDHWR access */ - mtc0 zero, CP0_HWRENA - - .set noat - /* Now load up the Guest Context from VCPU */ - LONG_L $1, VCPU_R1(k1) - LONG_L $2, VCPU_R2(k1) - LONG_L $3, VCPU_R3(k1) - - LONG_L $4, VCPU_R4(k1) - LONG_L $5, VCPU_R5(k1) - LONG_L $6, VCPU_R6(k1) - LONG_L $7, VCPU_R7(k1) - - LONG_L $8, VCPU_R8(k1) - LONG_L $9, VCPU_R9(k1) - LONG_L $10, VCPU_R10(k1) - LONG_L $11, VCPU_R11(k1) - LONG_L $12, VCPU_R12(k1) - LONG_L $13, VCPU_R13(k1) - LONG_L $14, VCPU_R14(k1) - LONG_L $15, VCPU_R15(k1) - LONG_L $16, VCPU_R16(k1) - LONG_L $17, VCPU_R17(k1) - LONG_L $18, VCPU_R18(k1) - LONG_L $19, VCPU_R19(k1) - LONG_L $20, VCPU_R20(k1) - LONG_L $21, VCPU_R21(k1) - LONG_L $22, VCPU_R22(k1) - LONG_L $23, VCPU_R23(k1) - LONG_L $24, VCPU_R24(k1) - LONG_L $25, VCPU_R25(k1) - - /* k0/k1 loaded up later */ - - LONG_L $28, VCPU_R28(k1) - LONG_L $29, VCPU_R29(k1) - LONG_L $30, VCPU_R30(k1) - LONG_L $31, VCPU_R31(k1) - - /* Restore hi/lo */ - LONG_L k0, VCPU_LO(k1) - mtlo k0 - - LONG_L k0, VCPU_HI(k1) - mthi k0 - -FEXPORT(__kvm_mips_load_k0k1) - /* Restore the guest's k0/k1 registers */ - LONG_L k0, VCPU_R26(k1) - LONG_L k1, VCPU_R27(k1) - - /* Jump to guest */ - eret -EXPORT(__kvm_mips_vcpu_run_end) - -VECTOR(MIPSX(exception), unknown) -/* Find out what mode we came from and jump to the proper handler. */ - mtc0 k0, CP0_ERROREPC #01: Save guest k0 - ehb #02: - - mfc0 k0, CP0_EBASE #02: Get EBASE - INT_SRL k0, k0, 10 #03: Get rid of CPUNum - INT_SLL k0, k0, 10 #04 - LONG_S k1, 0x3000(k0) #05: Save k1 @ offset 0x3000 - INT_ADDIU k0, k0, 0x2000 #06: Exception handler is - # installed @ offset 0x2000 - j k0 #07: jump to the function - nop #08: branch delay slot -VECTOR_END(MIPSX(exceptionEnd)) -.end MIPSX(exception) - -/* - * Generic Guest exception handler. We end up here when the guest - * does something that causes a trap to kernel mode. - */ -NESTED (MIPSX(GuestException), CALLFRAME_SIZ, ra) - /* Get the VCPU pointer from DDTATA_LO */ - mfc0 k1, CP0_DDATA_LO - INT_ADDIU k1, k1, VCPU_HOST_ARCH - - /* Start saving Guest context to VCPU */ - LONG_S $0, VCPU_R0(k1) - LONG_S $1, VCPU_R1(k1) - LONG_S $2, VCPU_R2(k1) - LONG_S $3, VCPU_R3(k1) - LONG_S $4, VCPU_R4(k1) - LONG_S $5, VCPU_R5(k1) - LONG_S $6, VCPU_R6(k1) - LONG_S $7, VCPU_R7(k1) - LONG_S $8, VCPU_R8(k1) - LONG_S $9, VCPU_R9(k1) - LONG_S $10, VCPU_R10(k1) - LONG_S $11, VCPU_R11(k1) - LONG_S $12, VCPU_R12(k1) - LONG_S $13, VCPU_R13(k1) - LONG_S $14, VCPU_R14(k1) - LONG_S $15, VCPU_R15(k1) - LONG_S $16, VCPU_R16(k1) - LONG_S $17, VCPU_R17(k1) - LONG_S $18, VCPU_R18(k1) - LONG_S $19, VCPU_R19(k1) - LONG_S $20, VCPU_R20(k1) - LONG_S $21, VCPU_R21(k1) - LONG_S $22, VCPU_R22(k1) - LONG_S $23, VCPU_R23(k1) - LONG_S $24, VCPU_R24(k1) - LONG_S $25, VCPU_R25(k1) - - /* Guest k0/k1 saved later */ - - LONG_S $28, VCPU_R28(k1) - LONG_S $29, VCPU_R29(k1) - LONG_S $30, VCPU_R30(k1) - LONG_S $31, VCPU_R31(k1) - - .set at - - /* We need to save hi/lo and restore them on the way out */ - mfhi t0 - LONG_S t0, VCPU_HI(k1) - - mflo t0 - LONG_S t0, VCPU_LO(k1) - - /* Finally save guest k0/k1 to VCPU */ - mfc0 t0, CP0_ERROREPC - LONG_S t0, VCPU_R26(k1) - - /* Get GUEST k1 and save it in VCPU */ - PTR_LI t1, ~0x2ff - mfc0 t0, CP0_EBASE - and t0, t0, t1 - LONG_L t0, 0x3000(t0) - LONG_S t0, VCPU_R27(k1) - - /* Now that context has been saved, we can use other registers */ - - /* Restore vcpu */ - mfc0 a1, CP0_DDATA_LO - move s1, a1 - - /* Restore run (vcpu->run) */ - LONG_L a0, VCPU_RUN(a1) - /* Save pointer to run in s0, will be saved by the compiler */ - move s0, a0 - - /* - * Save Host level EPC, BadVaddr and Cause to VCPU, useful to - * process the exception - */ - mfc0 k0,CP0_EPC - LONG_S k0, VCPU_PC(k1) - - mfc0 k0, CP0_BADVADDR - LONG_S k0, VCPU_HOST_CP0_BADVADDR(k1) - - mfc0 k0, CP0_CAUSE - sw k0, VCPU_HOST_CP0_CAUSE(k1) - - /* Now restore the host state just enough to run the handlers */ - - /* Switch EBASE to the one used by Linux */ - /* load up the host EBASE */ - mfc0 v0, CP0_STATUS - - or k0, v0, ST0_BEV - - mtc0 k0, CP0_STATUS - ehb - - LONG_L k0, ebase - mtc0 k0,CP0_EBASE - - /* - * If FPU is enabled, save FCR31 and clear it so that later ctc1's don't - * trigger FPE for pending exceptions. - */ - and v1, v0, ST0_CU1 - beqz v1, 1f - nop - .set push - SET_HARDFLOAT - cfc1 t0, fcr31 - sw t0, VCPU_FCR31(k1) - ctc1 zero,fcr31 - .set pop -1: - -#ifdef CONFIG_CPU_HAS_MSA - /* - * If MSA is enabled, save MSACSR and clear it so that later - * instructions don't trigger MSAFPE for pending exceptions. - */ - mfc0 t0, CP0_CONFIG3 - ext t0, t0, 28, 1 /* MIPS_CONF3_MSAP */ - beqz t0, 1f - nop - mfc0 t0, CP0_CONFIG5 - ext t0, t0, 27, 1 /* MIPS_CONF5_MSAEN */ - beqz t0, 1f - nop - _cfcmsa t0, MSA_CSR - sw t0, VCPU_MSA_CSR(k1) - _ctcmsa MSA_CSR, zero -1: -#endif - - /* Now that the new EBASE has been loaded, unset BEV and KSU_USER */ - and v0, v0, ~(ST0_EXL | KSU_USER | ST0_IE) - or v0, v0, ST0_CU0 - mtc0 v0, CP0_STATUS - ehb - - /* Load up host GP */ - LONG_L gp, VCPU_HOST_GP(k1) - - /* Need a stack before we can jump to "C" */ - LONG_L sp, VCPU_HOST_STACK(k1) - - /* Saved host state */ - INT_ADDIU sp, sp, -PT_SIZE - - /* - * XXXKYMA do we need to load the host ASID, maybe not because the - * kernel entries are marked GLOBAL, need to verify - */ - - /* Restore host DDATA_LO */ - LONG_L k0, PT_HOST_USERLOCAL(sp) - mtc0 k0, CP0_DDATA_LO - - /* Restore RDHWR access */ - INT_L k0, hwrena - mtc0 k0, CP0_HWRENA - - /* Jump to handler */ -FEXPORT(__kvm_mips_jump_to_handler) - /* - * XXXKYMA: not sure if this is safe, how large is the stack?? - * Now jump to the kvm_mips_handle_exit() to see if we can deal - * with this in the kernel - */ - PTR_LA t9, kvm_mips_handle_exit - jalr.hb t9 - INT_ADDIU sp, sp, -CALLFRAME_SIZ /* BD Slot */ - - /* Return from handler Make sure interrupts are disabled */ - di - ehb - - /* - * XXXKYMA: k0/k1 could have been blown away if we processed - * an exception while we were handling the exception from the - * guest, reload k1 - */ - - move k1, s1 - INT_ADDIU k1, k1, VCPU_HOST_ARCH - - /* - * Check return value, should tell us if we are returning to the - * host (handle I/O etc)or resuming the guest - */ - andi t0, v0, RESUME_HOST - bnez t0, __kvm_mips_return_to_host - nop - -__kvm_mips_return_to_guest: - /* Put the saved pointer to vcpu (s1) back into the DDATA_LO Register */ - mtc0 s1, CP0_DDATA_LO - - /* Load up the Guest EBASE to minimize the window where BEV is set */ - LONG_L t0, VCPU_GUEST_EBASE(k1) - - /* Switch EBASE back to the one used by KVM */ - mfc0 v1, CP0_STATUS - or k0, v1, ST0_BEV - mtc0 k0, CP0_STATUS - ehb - mtc0 t0, CP0_EBASE - - /* Setup status register for running guest in UM */ - or v1, v1, (ST0_EXL | KSU_USER | ST0_IE) - and v1, v1, ~(ST0_CU0 | ST0_MX) - mtc0 v1, CP0_STATUS - ehb - - /* Set Guest EPC */ - LONG_L t0, VCPU_PC(k1) - mtc0 t0, CP0_EPC - - /* Set the ASID for the Guest Kernel */ - PTR_L t0, VCPU_COP0(k1) - LONG_L t0, COP0_STATUS(t0) - andi t0, KSU_USER | ST0_ERL | ST0_EXL - xori t0, KSU_USER - bnez t0, 1f /* If kernel */ - INT_ADDIU t1, k1, VCPU_GUEST_KERNEL_ASID /* (BD) */ - INT_ADDIU t1, k1, VCPU_GUEST_USER_ASID /* else user */ -1: - /* t1: contains the base of the ASID array, need to get the cpu id */ - LONG_L t2, TI_CPU($28) /* smp_processor_id */ - INT_SLL t2, t2, 2 /* x4 */ - REG_ADDU t3, t1, t2 - LONG_L k0, (t3) -#ifdef CONFIG_MIPS_ASID_BITS_VARIABLE - li t3, CPUINFO_SIZE/4 - mul t2, t2, t3 /* x sizeof(struct cpuinfo_mips)/4 */ - LONG_L t2, (cpu_data + CPUINFO_ASID_MASK)(t2) - and k0, k0, t2 -#else - andi k0, k0, MIPS_ENTRYHI_ASID -#endif - mtc0 k0, CP0_ENTRYHI - ehb - - /* Disable RDHWR access */ - mtc0 zero, CP0_HWRENA - - .set noat - /* load the guest context from VCPU and return */ - LONG_L $0, VCPU_R0(k1) - LONG_L $1, VCPU_R1(k1) - LONG_L $2, VCPU_R2(k1) - LONG_L $3, VCPU_R3(k1) - LONG_L $4, VCPU_R4(k1) - LONG_L $5, VCPU_R5(k1) - LONG_L $6, VCPU_R6(k1) - LONG_L $7, VCPU_R7(k1) - LONG_L $8, VCPU_R8(k1) - LONG_L $9, VCPU_R9(k1) - LONG_L $10, VCPU_R10(k1) - LONG_L $11, VCPU_R11(k1) - LONG_L $12, VCPU_R12(k1) - LONG_L $13, VCPU_R13(k1) - LONG_L $14, VCPU_R14(k1) - LONG_L $15, VCPU_R15(k1) - LONG_L $16, VCPU_R16(k1) - LONG_L $17, VCPU_R17(k1) - LONG_L $18, VCPU_R18(k1) - LONG_L $19, VCPU_R19(k1) - LONG_L $20, VCPU_R20(k1) - LONG_L $21, VCPU_R21(k1) - LONG_L $22, VCPU_R22(k1) - LONG_L $23, VCPU_R23(k1) - LONG_L $24, VCPU_R24(k1) - LONG_L $25, VCPU_R25(k1) - - /* $/k1 loaded later */ - LONG_L $28, VCPU_R28(k1) - LONG_L $29, VCPU_R29(k1) - LONG_L $30, VCPU_R30(k1) - LONG_L $31, VCPU_R31(k1) - -FEXPORT(__kvm_mips_skip_guest_restore) - LONG_L k0, VCPU_HI(k1) - mthi k0 - - LONG_L k0, VCPU_LO(k1) - mtlo k0 - - LONG_L k0, VCPU_R26(k1) - LONG_L k1, VCPU_R27(k1) - - eret - .set at - -__kvm_mips_return_to_host: - /* EBASE is already pointing to Linux */ - LONG_L k1, VCPU_HOST_STACK(k1) - INT_ADDIU k1,k1, -PT_SIZE - - /* Restore host DDATA_LO */ - LONG_L k0, PT_HOST_USERLOCAL(k1) - mtc0 k0, CP0_DDATA_LO - - /* - * r2/v0 is the return code, shift it down by 2 (arithmetic) - * to recover the err code - */ - INT_SRA k0, v0, 2 - move $2, k0 - - /* Load context saved on the host stack */ - LONG_L $16, PT_R16(k1) - LONG_L $17, PT_R17(k1) - LONG_L $18, PT_R18(k1) - LONG_L $19, PT_R19(k1) - LONG_L $20, PT_R20(k1) - LONG_L $21, PT_R21(k1) - LONG_L $22, PT_R22(k1) - LONG_L $23, PT_R23(k1) - - LONG_L $28, PT_R28(k1) - LONG_L $29, PT_R29(k1) - LONG_L $30, PT_R30(k1) - - LONG_L k0, PT_HI(k1) - mthi k0 - - LONG_L k0, PT_LO(k1) - mtlo k0 - - /* Restore RDHWR access */ - INT_L k0, hwrena - mtc0 k0, CP0_HWRENA - - /* Restore RA, which is the address we will return to */ - LONG_L ra, PT_R31(k1) - j ra - nop - -VECTOR_END(MIPSX(GuestExceptionEnd)) -.end MIPSX(GuestException) - -MIPSX(exceptions): - #### - ##### The exception handlers. - ##### - .word _C_LABEL(MIPSX(GuestException)) # 0 - .word _C_LABEL(MIPSX(GuestException)) # 1 - .word _C_LABEL(MIPSX(GuestException)) # 2 - .word _C_LABEL(MIPSX(GuestException)) # 3 - .word _C_LABEL(MIPSX(GuestException)) # 4 - .word _C_LABEL(MIPSX(GuestException)) # 5 - .word _C_LABEL(MIPSX(GuestException)) # 6 - .word _C_LABEL(MIPSX(GuestException)) # 7 - .word _C_LABEL(MIPSX(GuestException)) # 8 - .word _C_LABEL(MIPSX(GuestException)) # 9 - .word _C_LABEL(MIPSX(GuestException)) # 10 - .word _C_LABEL(MIPSX(GuestException)) # 11 - .word _C_LABEL(MIPSX(GuestException)) # 12 - .word _C_LABEL(MIPSX(GuestException)) # 13 - .word _C_LABEL(MIPSX(GuestException)) # 14 - .word _C_LABEL(MIPSX(GuestException)) # 15 - .word _C_LABEL(MIPSX(GuestException)) # 16 - .word _C_LABEL(MIPSX(GuestException)) # 17 - .word _C_LABEL(MIPSX(GuestException)) # 18 - .word _C_LABEL(MIPSX(GuestException)) # 19 - .word _C_LABEL(MIPSX(GuestException)) # 20 - .word _C_LABEL(MIPSX(GuestException)) # 21 - .word _C_LABEL(MIPSX(GuestException)) # 22 - .word _C_LABEL(MIPSX(GuestException)) # 23 - .word _C_LABEL(MIPSX(GuestException)) # 24 - .word _C_LABEL(MIPSX(GuestException)) # 25 - .word _C_LABEL(MIPSX(GuestException)) # 26 - .word _C_LABEL(MIPSX(GuestException)) # 27 - .word _C_LABEL(MIPSX(GuestException)) # 28 - .word _C_LABEL(MIPSX(GuestException)) # 29 - .word _C_LABEL(MIPSX(GuestException)) # 30 - .word _C_LABEL(MIPSX(GuestException)) # 31 diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 5f1163653b50..e3ae1229f147 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -247,8 +247,8 @@ void kvm_arch_commit_memory_region(struct kvm *kvm, struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) { - int err, size, offset; - void *gebase; + int err, size; + void *gebase, *p; int i; struct kvm_vcpu *vcpu = kzalloc(sizeof(struct kvm_vcpu), GFP_KERNEL); @@ -286,41 +286,28 @@ struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) /* Save new ebase */ vcpu->arch.guest_ebase = gebase; - /* Copy L1 Guest Exception handler to correct offset */ + /* Build guest exception vectors dynamically in unmapped memory */ /* TLB Refill, EXL = 0 */ - memcpy(gebase, mips32_exception, - mips32_exceptionEnd - mips32_exception); + kvm_mips_build_exception(gebase); /* General Exception Entry point */ - memcpy(gebase + 0x180, mips32_exception, - mips32_exceptionEnd - mips32_exception); + kvm_mips_build_exception(gebase + 0x180); /* For vectored interrupts poke the exception code @ all offsets 0-7 */ for (i = 0; i < 8; i++) { kvm_debug("L1 Vectored handler @ %p\n", gebase + 0x200 + (i * VECTORSPACING)); - memcpy(gebase + 0x200 + (i * VECTORSPACING), mips32_exception, - mips32_exceptionEnd - mips32_exception); + kvm_mips_build_exception(gebase + 0x200 + i * VECTORSPACING); } - /* General handler, relocate to unmapped space for sanity's sake */ - offset = 0x2000; - kvm_debug("Installing KVM Exception handlers @ %p, %#x bytes\n", - gebase + offset, - mips32_GuestExceptionEnd - mips32_GuestException); + /* General exit handler */ + p = gebase + 0x2000; + p = kvm_mips_build_exit(p); - memcpy(gebase + offset, mips32_GuestException, - mips32_GuestExceptionEnd - mips32_GuestException); - -#ifdef MODULE - offset += mips32_GuestExceptionEnd - mips32_GuestException; - memcpy(gebase + offset, (char *)__kvm_mips_vcpu_run, - __kvm_mips_vcpu_run_end - (char *)__kvm_mips_vcpu_run); - vcpu->arch.vcpu_run = gebase + offset; -#else - vcpu->arch.vcpu_run = __kvm_mips_vcpu_run; -#endif + /* Guest entry routine */ + vcpu->arch.vcpu_run = p; + p = kvm_mips_build_vcpu_run(p); /* Invalidate the icache for these ranges */ local_flush_icache_range((unsigned long)gebase, -- 2.20.1