From 8feceb67929bd23bfca58d5f49df93d7fc315bb1 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Wed, 10 Sep 2008 18:49:27 +0530 Subject: [PATCH] ath9k: Re-order functions in main.c Some of the functions in main.c are re-ordered in such a way that all local functions are defined before mac80211 and pci callbacks. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath9k/main.c | 1722 ++++++++++++++--------------- 1 file changed, 861 insertions(+), 861 deletions(-) diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 57d7cc87cb0f..07e5b5d877b6 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -325,1087 +325,1087 @@ static u8 parse_mpdudensity(u8 mpdudensity) } } -static int ath9k_start(struct ieee80211_hw *hw) +static void ath9k_ht_conf(struct ath_softc *sc, + struct ieee80211_bss_conf *bss_conf) { - struct ath_softc *sc = hw->priv; - struct ieee80211_channel *curchan = hw->conf.channel; - int error = 0, pos; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with " - "initial channel: %d MHz\n", __func__, curchan->center_freq); +#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14) + struct ath_ht_info *ht_info = &sc->sc_ht_info; - /* setup initial channel */ + if (bss_conf->assoc_ht) { + ht_info->ext_chan_offset = + bss_conf->ht_bss_conf->bss_cap & + IEEE80211_HT_IE_CHA_SEC_OFFSET; - pos = ath_get_channel(sc, curchan); - if (pos == -1) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); - return -EINVAL; - } + if (!(bss_conf->ht_conf->cap & + IEEE80211_HT_CAP_40MHZ_INTOLERANT) && + (bss_conf->ht_bss_conf->bss_cap & + IEEE80211_HT_IE_CHA_WIDTH)) + ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040; + else + ht_info->tx_chan_width = ATH9K_HT_MACMODE_20; - sc->sc_ah->ah_channels[pos].chanmode = - (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; + ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width); + ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + + bss_conf->ht_conf->ampdu_factor); + ht_info->mpdudensity = + parse_mpdudensity(bss_conf->ht_conf->ampdu_density); - /* open ath_dev */ - error = ath_open(sc, &sc->sc_ah->ah_channels[pos]); - if (error) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to complete ath_open\n", __func__); - return error; } - ieee80211_wake_queues(hw); - return 0; +#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT } -static int ath9k_tx(struct ieee80211_hw *hw, - struct sk_buff *skb) +static void ath9k_bss_assoc_info(struct ath_softc *sc, + struct ieee80211_bss_conf *bss_conf) { - struct ath_softc *sc = hw->priv; - int hdrlen, padsize; - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - - /* - * As a temporary workaround, assign seq# here; this will likely need - * to be cleaned up to work better with Beacon transmission and virtual - * BSSes. - */ - if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) - sc->seq_no += 0x10; - hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); - hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); - } + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_channel *curchan = hw->conf.channel; + struct ath_vap *avp; + int pos; + DECLARE_MAC_BUF(mac); - /* Add the padding after the header if this is not already done */ - hdrlen = ieee80211_get_hdrlen_from_skb(skb); - if (hdrlen & 3) { - padsize = hdrlen % 4; - if (skb_headroom(skb) < padsize) - return -1; - skb_push(skb, padsize); - memmove(skb->data, skb->data + padsize, hdrlen); - } + if (bss_conf->assoc) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info ASSOC %d\n", + __func__, + bss_conf->aid); - DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting packet, skb: %p\n", - __func__, - skb); + avp = sc->sc_vaps[0]; + if (avp == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", + __func__); + return; + } - if (ath_tx_start(sc, skb) != 0) { - DPRINTF(sc, ATH_DBG_XMIT, "%s: TX failed\n", __func__); - dev_kfree_skb_any(skb); - /* FIXME: Check for proper return value from ATH_DEV */ - return 0; - } + /* New association, store aid */ + if (avp->av_opmode == ATH9K_M_STA) { + sc->sc_curaid = bss_conf->aid; + ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid, + sc->sc_curaid); + } - return 0; -} + /* Configure the beacon */ + ath_beacon_config(sc, 0); + sc->sc_flags |= SC_OP_BEACONS; -static void ath9k_stop(struct ieee80211_hw *hw) -{ - struct ath_softc *sc = hw->priv; - int error; + /* Reset rssi stats */ + sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; + sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__); + /* Update chainmask */ + ath_update_chainmask(sc, bss_conf->assoc_ht); - error = ath_suspend(sc); - if (error) DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Device is no longer present\n", __func__); + "%s: bssid %s aid 0x%x\n", + __func__, + print_mac(mac, sc->sc_curbssid), sc->sc_curaid); - ieee80211_stop_queues(hw); -} + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", + __func__, + curchan->center_freq); -static int ath9k_add_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) -{ - struct ath_softc *sc = hw->priv; - int error, ic_opmode = 0; + pos = ath_get_channel(sc, curchan); + if (pos == -1) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Invalid channel\n", __func__); + return; + } - /* Support only vap for now */ + if (hw->conf.ht_conf.ht_supported) + sc->sc_ah->ah_channels[pos].chanmode = + ath_get_extchanmode(sc, curchan); + else + sc->sc_ah->ah_channels[pos].chanmode = + (curchan->band == IEEE80211_BAND_2GHZ) ? + CHANNEL_G : CHANNEL_A; - if (sc->sc_nvaps) - return -ENOBUFS; + /* set h/w channel */ + if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to set channel\n", + __func__); - switch (conf->type) { - case IEEE80211_IF_TYPE_STA: - ic_opmode = ATH9K_M_STA; - break; - case IEEE80211_IF_TYPE_IBSS: - ic_opmode = ATH9K_M_IBSS; - break; - case IEEE80211_IF_TYPE_AP: - ic_opmode = ATH9K_M_HOSTAP; - break; - default: - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Interface type %d not yet supported\n", - __func__, conf->type); - return -EOPNOTSUPP; + ath_rate_newstate(sc, avp); + /* Update ratectrl about the new state */ + ath_rc_node_update(hw, avp->rc_node); + } else { + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: Bss Info DISSOC\n", __func__); + sc->sc_curaid = 0; } +} - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a VAP of type: %d\n", - __func__, - ic_opmode); +void ath_get_beaconconfig(struct ath_softc *sc, + int if_id, + struct ath_beacon_config *conf) +{ + struct ieee80211_hw *hw = sc->hw; - error = ath_vap_attach(sc, 0, conf->vif, ic_opmode); - if (error) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to attach vap, error: %d\n", - __func__, error); - return error; - } + /* fill in beacon config data */ - return 0; + conf->beacon_interval = hw->conf.beacon_int; + conf->listen_interval = 100; + conf->dtim_count = 1; + conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; } -static void ath9k_remove_interface(struct ieee80211_hw *hw, - struct ieee80211_if_init_conf *conf) +void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, + struct ath_xmit_status *tx_status, struct ath_node *an) { - struct ath_softc *sc = hw->priv; - struct ath_vap *avp; - int error; + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach VAP\n", __func__); + DPRINTF(sc, ATH_DBG_XMIT, + "%s: TX complete: skb: %p\n", __func__, skb); - avp = sc->sc_vaps[0]; - if (avp == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", - __func__); - return; + if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || + tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { + /* free driver's private data area of tx_info */ + if (tx_info->driver_data[0] != NULL) + kfree(tx_info->driver_data[0]); + tx_info->driver_data[0] = NULL; } -#ifdef CONFIG_SLOW_ANT_DIV - ath_slow_ant_div_stop(&sc->sc_antdiv); -#endif - - /* Update ratectrl */ - ath_rate_newstate(sc, avp); + if (tx_status->flags & ATH_TX_BAR) { + tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; + tx_status->flags &= ~ATH_TX_BAR; + } - /* Reclaim beacon resources */ - if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP || - sc->sc_ah->ah_opmode == ATH9K_M_IBSS) { - ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); - ath_beacon_return(sc, avp); + if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { + if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { + /* Frame was not ACKed, but an ACK was expected */ + tx_info->status.excessive_retries = 1; + } + } else { + /* Frame was ACKed */ + tx_info->flags |= IEEE80211_TX_STAT_ACK; } - /* Set interrupt mask */ - sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); - ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask & ~ATH9K_INT_GLOBAL); - sc->sc_flags &= ~SC_OP_BEACONS; + tx_info->status.retry_count = tx_status->retries; - error = ath_vap_detach(sc, 0); - if (error) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to detach vap, error: %d\n", - __func__, error); + ieee80211_tx_status(hw, skb); + if (an) + ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE); } -static int ath9k_config(struct ieee80211_hw *hw, - struct ieee80211_conf *conf) +int _ath_rx_indicate(struct ath_softc *sc, + struct sk_buff *skb, + struct ath_recv_status *status, + u16 keyix) { - struct ath_softc *sc = hw->priv; - struct ieee80211_channel *curchan = hw->conf.channel; - int pos; - - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", - __func__, - curchan->center_freq); + struct ieee80211_hw *hw = sc->hw; + struct ath_node *an = NULL; + struct ieee80211_rx_status rx_status; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + int hdrlen = ieee80211_get_hdrlen_from_skb(skb); + int padsize; + enum ATH_RX_TYPE st; - pos = ath_get_channel(sc, curchan); - if (pos == -1) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); - return -EINVAL; + /* see if any padding is done by the hw and remove it */ + if (hdrlen & 3) { + padsize = hdrlen % 4; + memmove(skb->data + padsize, skb->data, hdrlen); + skb_pull(skb, padsize); } - sc->sc_ah->ah_channels[pos].chanmode = - (curchan->band == IEEE80211_BAND_2GHZ) ? - CHANNEL_G : CHANNEL_A; + /* Prepare rx status */ + ath9k_rx_prepare(sc, skb, status, &rx_status); - if (sc->sc_curaid && hw->conf.ht_conf.ht_supported) - sc->sc_ah->ah_channels[pos].chanmode = - ath_get_extchanmode(sc, curchan); + if (!(keyix == ATH9K_RXKEYIX_INVALID) && + !(status->flags & ATH_RX_DECRYPT_ERROR)) { + rx_status.flag |= RX_FLAG_DECRYPTED; + } else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) + && !(status->flags & ATH_RX_DECRYPT_ERROR) + && skb->len >= hdrlen + 4) { + keyix = skb->data[hdrlen + 3] >> 6; - sc->sc_config.txpowlimit = 2 * conf->power_level; + if (test_bit(keyix, sc->sc_keymap)) + rx_status.flag |= RX_FLAG_DECRYPTED; + } - /* set h/w channel */ - if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) - DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to set channel\n", - __func__); + spin_lock_bh(&sc->node_lock); + an = ath_node_find(sc, hdr->addr2); + spin_unlock_bh(&sc->node_lock); + + if (an) { + ath_rx_input(sc, an, + hw->conf.ht_conf.ht_supported, + skb, status, &st); + } + if (!an || (st != ATH_RX_CONSUMED)) + __ieee80211_rx(hw, skb, &rx_status); return 0; } -static int ath9k_config_interface(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_if_conf *conf) +int ath_rx_subframe(struct ath_node *an, + struct sk_buff *skb, + struct ath_recv_status *status) { - struct ath_softc *sc = hw->priv; - struct ath_hal *ah = sc->sc_ah; - struct ath_vap *avp; - u32 rfilt = 0; - int error, i; - DECLARE_MAC_BUF(mac); - - avp = sc->sc_vaps[0]; - if (avp == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", - __func__); - return -EINVAL; - } - - /* TODO: Need to decide which hw opmode to use for multi-interface - * cases */ - if (vif->type == IEEE80211_IF_TYPE_AP && - ah->ah_opmode != ATH9K_M_HOSTAP) { - ah->ah_opmode = ATH9K_M_HOSTAP; - ath9k_hw_setopmode(ah); - ath9k_hw_write_associd(ah, sc->sc_myaddr, 0); - /* Request full reset to get hw opmode changed properly */ - sc->sc_flags |= SC_OP_FULL_RESET; - } - - if ((conf->changed & IEEE80211_IFCC_BSSID) && - !is_zero_ether_addr(conf->bssid)) { - switch (vif->type) { - case IEEE80211_IF_TYPE_STA: - case IEEE80211_IF_TYPE_IBSS: - /* Update ratectrl about the new state */ - ath_rate_newstate(sc, avp); - - /* Set BSSID */ - memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN); - sc->sc_curaid = 0; - ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid, - sc->sc_curaid); + struct ath_softc *sc = an->an_sc; + struct ieee80211_hw *hw = sc->hw; + struct ieee80211_rx_status rx_status; - /* Set aggregation protection mode parameters */ - sc->sc_config.ath_aggr_prot = 0; + /* Prepare rx status */ + ath9k_rx_prepare(sc, skb, status, &rx_status); + if (!(status->flags & ATH_RX_DECRYPT_ERROR)) + rx_status.flag |= RX_FLAG_DECRYPTED; - /* - * Reset our TSF so that its value is lower than the - * beacon that we are trying to catch. - * Only then hw will update its TSF register with the - * new beacon. Reset the TSF before setting the BSSID - * to avoid allowing in any frames that would update - * our TSF only to have us clear it - * immediately thereafter. - */ - ath9k_hw_reset_tsf(sc->sc_ah); + __ieee80211_rx(hw, skb, &rx_status); - /* Disable BMISS interrupt when we're not associated */ - ath9k_hw_set_interrupts(sc->sc_ah, - sc->sc_imask & - ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS)); - sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); + return 0; +} - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: RX filter 0x%x bssid %s aid 0x%x\n", - __func__, rfilt, - print_mac(mac, sc->sc_curbssid), sc->sc_curaid); +/********************************/ +/* LED functions */ +/********************************/ - /* need to reconfigure the beacon */ - sc->sc_flags &= ~SC_OP_BEACONS ; +static void ath_led_brightness(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev); + struct ath_softc *sc = led->sc; - break; - default: - break; - } + switch (brightness) { + case LED_OFF: + if (led->led_type == ATH_LED_ASSOC || + led->led_type == ATH_LED_RADIO) + sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, + (led->led_type == ATH_LED_RADIO) ? 1 : + !!(sc->sc_flags & SC_OP_LED_ASSOCIATED)); + break; + case LED_FULL: + if (led->led_type == ATH_LED_ASSOC) + sc->sc_flags |= SC_OP_LED_ASSOCIATED; + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0); + break; + default: + break; } +} - if ((conf->changed & IEEE80211_IFCC_BEACON) && - ((vif->type == IEEE80211_IF_TYPE_IBSS) || - (vif->type == IEEE80211_IF_TYPE_AP))) { - /* - * Allocate and setup the beacon frame. - * - * Stop any previous beacon DMA. This may be - * necessary, for example, when an ibss merge - * causes reconfiguration; we may be called - * with beacon transmission active. - */ - ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); +static int ath_register_led(struct ath_softc *sc, struct ath_led *led, + char *trigger) +{ + int ret; - error = ath_beacon_alloc(sc, 0); - if (error != 0) - return error; + led->sc = sc; + led->led_cdev.name = led->name; + led->led_cdev.default_trigger = trigger; + led->led_cdev.brightness_set = ath_led_brightness; - ath_beacon_sync(sc, 0); - } + ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev); + if (ret) + DPRINTF(sc, ATH_DBG_FATAL, + "Failed to register led:%s", led->name); + else + led->registered = 1; + return ret; +} - /* Check for WLAN_CAPABILITY_PRIVACY ? */ - if ((avp->av_opmode != IEEE80211_IF_TYPE_STA)) { - for (i = 0; i < IEEE80211_WEP_NKID; i++) - if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i)) - ath9k_hw_keysetmac(sc->sc_ah, - (u16)i, - sc->sc_curbssid); +static void ath_unregister_led(struct ath_led *led) +{ + if (led->registered) { + led_classdev_unregister(&led->led_cdev); + led->registered = 0; } - - /* Only legacy IBSS for now */ - if (vif->type == IEEE80211_IF_TYPE_IBSS) - ath_update_chainmask(sc, 0); - - return 0; } -#define SUPPORTED_FILTERS \ - (FIF_PROMISC_IN_BSS | \ - FIF_ALLMULTI | \ - FIF_CONTROL | \ - FIF_OTHER_BSS | \ - FIF_BCN_PRBRESP_PROMISC | \ - FIF_FCSFAIL) - -/* FIXME: sc->sc_full_reset ? */ -static void ath9k_configure_filter(struct ieee80211_hw *hw, - unsigned int changed_flags, - unsigned int *total_flags, - int mc_count, - struct dev_mc_list *mclist) +static void ath_deinit_leds(struct ath_softc *sc) { - struct ath_softc *sc = hw->priv; - u32 rfilt; + ath_unregister_led(&sc->assoc_led); + sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; + ath_unregister_led(&sc->tx_led); + ath_unregister_led(&sc->rx_led); + ath_unregister_led(&sc->radio_led); + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); +} - changed_flags &= SUPPORTED_FILTERS; - *total_flags &= SUPPORTED_FILTERS; +static void ath_init_leds(struct ath_softc *sc) +{ + char *trigger; + int ret; - sc->rx_filter = *total_flags; - rfilt = ath_calcrxfilter(sc); - ath9k_hw_setrxfilter(sc->sc_ah, rfilt); + /* Configure gpio 1 for output */ + ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + /* LED off, active low */ + ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); - if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { - if (*total_flags & FIF_BCN_PRBRESP_PROMISC) - ath9k_hw_write_associd(sc->sc_ah, ath_bcast_mac, 0); - } + trigger = ieee80211_get_radio_led_name(sc->hw); + snprintf(sc->radio_led.name, sizeof(sc->radio_led.name), + "ath9k-%s:radio", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->radio_led, trigger); + sc->radio_led.led_type = ATH_LED_RADIO; + if (ret) + goto fail; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set HW RX filter: 0x%x\n", - __func__, sc->rx_filter); -} + trigger = ieee80211_get_assoc_led_name(sc->hw); + snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name), + "ath9k-%s:assoc", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->assoc_led, trigger); + sc->assoc_led.led_type = ATH_LED_ASSOC; + if (ret) + goto fail; -static void ath9k_sta_notify(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - enum sta_notify_cmd cmd, - const u8 *addr) -{ - struct ath_softc *sc = hw->priv; - struct ath_node *an; - unsigned long flags; - DECLARE_MAC_BUF(mac); + trigger = ieee80211_get_tx_led_name(sc->hw); + snprintf(sc->tx_led.name, sizeof(sc->tx_led.name), + "ath9k-%s:tx", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->tx_led, trigger); + sc->tx_led.led_type = ATH_LED_TX; + if (ret) + goto fail; - spin_lock_irqsave(&sc->node_lock, flags); - an = ath_node_find(sc, (u8 *) addr); - spin_unlock_irqrestore(&sc->node_lock, flags); + trigger = ieee80211_get_rx_led_name(sc->hw); + snprintf(sc->rx_led.name, sizeof(sc->rx_led.name), + "ath9k-%s:rx", wiphy_name(sc->hw->wiphy)); + ret = ath_register_led(sc, &sc->rx_led, trigger); + sc->rx_led.led_type = ATH_LED_RX; + if (ret) + goto fail; - switch (cmd) { - case STA_NOTIFY_ADD: - spin_lock_irqsave(&sc->node_lock, flags); - if (!an) { - ath_node_attach(sc, (u8 *)addr, 0); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a node: %s\n", - __func__, - print_mac(mac, addr)); - } else { - ath_node_get(sc, (u8 *)addr); - } - spin_unlock_irqrestore(&sc->node_lock, flags); - break; - case STA_NOTIFY_REMOVE: - if (!an) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Removal of a non-existent node\n", - __func__); - else { - ath_node_put(sc, an, ATH9K_BH_STATUS_INTACT); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Put a node: %s\n", - __func__, - print_mac(mac, addr)); - } - break; - default: - break; - } + return; + +fail: + ath_deinit_leds(sc); } -static int ath9k_conf_tx(struct ieee80211_hw *hw, - u16 queue, - const struct ieee80211_tx_queue_params *params) +static int ath_detach(struct ath_softc *sc) { - struct ath_softc *sc = hw->priv; - struct ath9k_tx_queue_info qi; - int ret = 0, qnum; + struct ieee80211_hw *hw = sc->hw; - if (queue >= WME_NUM_AC) - return 0; + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__); - qi.tqi_aifs = params->aifs; - qi.tqi_cwmin = params->cw_min; - qi.tqi_cwmax = params->cw_max; - qi.tqi_burstTime = params->txop; - qnum = ath_get_hal_qnum(queue, sc); + /* Deinit LED control */ + ath_deinit_leds(sc); - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Configure tx [queue/halq] [%d/%d], " - "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", - __func__, - queue, - qnum, - params->aifs, - params->cw_min, - params->cw_max, - params->txop); + /* Unregister hw */ - ret = ath_txq_update(sc, qnum, &qi); - if (ret) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: TXQ Update failed\n", __func__); + ieee80211_unregister_hw(hw); - return ret; -} + /* unregister Rate control */ + ath_rate_control_unregister(); -static int ath9k_set_key(struct ieee80211_hw *hw, - enum set_key_cmd cmd, - const u8 *local_addr, - const u8 *addr, - struct ieee80211_key_conf *key) -{ - struct ath_softc *sc = hw->priv; - int ret = 0; + /* tx/rx cleanup */ - DPRINTF(sc, ATH_DBG_KEYCACHE, " %s: Set HW Key\n", __func__); + ath_rx_cleanup(sc); + ath_tx_cleanup(sc); - switch (cmd) { - case SET_KEY: - ret = ath_key_config(sc, addr, key); - if (!ret) { - set_bit(key->keyidx, sc->sc_keymap); - key->hw_key_idx = key->keyidx; - /* push IV and Michael MIC generation to stack */ - key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; - if (key->alg == ALG_TKIP) - key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; - } - break; - case DISABLE_KEY: - ath_key_delete(sc, key); - clear_bit(key->keyidx, sc->sc_keymap); - sc->sc_keytype = ATH9K_CIPHER_CLR; - break; - default: - ret = -EINVAL; - } + /* Deinit */ - return ret; + ath_deinit(sc); + + return 0; } -static void ath9k_ht_conf(struct ath_softc *sc, - struct ieee80211_bss_conf *bss_conf) +static int ath_attach(u16 devid, + struct ath_softc *sc) { -#define IEEE80211_HT_CAP_40MHZ_INTOLERANT BIT(14) - struct ath_ht_info *ht_info = &sc->sc_ht_info; - - if (bss_conf->assoc_ht) { - ht_info->ext_chan_offset = - bss_conf->ht_bss_conf->bss_cap & - IEEE80211_HT_IE_CHA_SEC_OFFSET; + struct ieee80211_hw *hw = sc->hw; + int error = 0; - if (!(bss_conf->ht_conf->cap & - IEEE80211_HT_CAP_40MHZ_INTOLERANT) && - (bss_conf->ht_bss_conf->bss_cap & - IEEE80211_HT_IE_CHA_WIDTH)) - ht_info->tx_chan_width = ATH9K_HT_MACMODE_2040; - else - ht_info->tx_chan_width = ATH9K_HT_MACMODE_20; + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach ATH hw\n", __func__); - ath9k_hw_set11nmac2040(sc->sc_ah, ht_info->tx_chan_width); - ht_info->maxampdu = 1 << (IEEE80211_HTCAP_MAXRXAMPDU_FACTOR + - bss_conf->ht_conf->ampdu_factor); - ht_info->mpdudensity = - parse_mpdudensity(bss_conf->ht_conf->ampdu_density); + error = ath_init(devid, sc); + if (error != 0) + return error; - } + /* Init nodes */ -#undef IEEE80211_HT_CAP_40MHZ_INTOLERANT -} + INIT_LIST_HEAD(&sc->node_list); + spin_lock_init(&sc->node_lock); -static void ath9k_bss_assoc_info(struct ath_softc *sc, - struct ieee80211_bss_conf *bss_conf) -{ - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_channel *curchan = hw->conf.channel; - struct ath_vap *avp; - int pos; - DECLARE_MAC_BUF(mac); + /* get mac address from hardware and set in mac80211 */ - if (bss_conf->assoc) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Bss Info ASSOC %d\n", - __func__, - bss_conf->aid); + SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr); - avp = sc->sc_vaps[0]; - if (avp == NULL) { - DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", - __func__); - return; - } + /* setup channels and rates */ - /* New association, store aid */ - if (avp->av_opmode == ATH9K_M_STA) { - sc->sc_curaid = bss_conf->aid; - ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid, - sc->sc_curaid); - } + sc->sbands[IEEE80211_BAND_2GHZ].channels = + sc->channels[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].bitrates = + sc->rates[IEEE80211_BAND_2GHZ]; + sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; - /* Configure the beacon */ - ath_beacon_config(sc, 0); - sc->sc_flags |= SC_OP_BEACONS; + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) + /* Setup HT capabilities for 2.4Ghz*/ + setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info); - /* Reset rssi stats */ - sc->sc_halstats.ns_avgbrssi = ATH_RSSI_DUMMY_MARKER; - sc->sc_halstats.ns_avgrssi = ATH_RSSI_DUMMY_MARKER; - sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; - sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER; + hw->wiphy->bands[IEEE80211_BAND_2GHZ] = + &sc->sbands[IEEE80211_BAND_2GHZ]; - /* Update chainmask */ - ath_update_chainmask(sc, bss_conf->assoc_ht); + if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) { + sc->sbands[IEEE80211_BAND_5GHZ].channels = + sc->channels[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].bitrates = + sc->rates[IEEE80211_BAND_5GHZ]; + sc->sbands[IEEE80211_BAND_5GHZ].band = + IEEE80211_BAND_5GHZ; - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: bssid %s aid 0x%x\n", - __func__, - print_mac(mac, sc->sc_curbssid), sc->sc_curaid); + if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) + /* Setup HT capabilities for 5Ghz*/ + setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", - __func__, - curchan->center_freq); + hw->wiphy->bands[IEEE80211_BAND_5GHZ] = + &sc->sbands[IEEE80211_BAND_5GHZ]; + } - pos = ath_get_channel(sc, curchan); - if (pos == -1) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Invalid channel\n", __func__); - return; - } + /* FIXME: Have to figure out proper hw init values later */ - if (hw->conf.ht_conf.ht_supported) - sc->sc_ah->ah_channels[pos].chanmode = - ath_get_extchanmode(sc, curchan); - else - sc->sc_ah->ah_channels[pos].chanmode = - (curchan->band == IEEE80211_BAND_2GHZ) ? - CHANNEL_G : CHANNEL_A; + hw->queues = 4; + hw->ampdu_queues = 1; - /* set h/w channel */ - if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to set channel\n", - __func__); + /* Register rate control */ + hw->rate_control_algorithm = "ath9k_rate_control"; + error = ath_rate_control_register(); + if (error != 0) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to register rate control " + "algorithm:%d\n", __func__, error); + ath_rate_control_unregister(); + goto bad; + } - ath_rate_newstate(sc, avp); - /* Update ratectrl about the new state */ - ath_rc_node_update(hw, avp->rc_node); - } else { - DPRINTF(sc, ATH_DBG_CONFIG, - "%s: Bss Info DISSOC\n", __func__); - sc->sc_curaid = 0; + error = ieee80211_register_hw(hw); + if (error != 0) { + ath_rate_control_unregister(); + goto bad; } + + /* Initialize LED control */ + ath_init_leds(sc); + + /* initialize tx/rx engine */ + + error = ath_tx_init(sc, ATH_TXBUF); + if (error != 0) + goto detach; + + error = ath_rx_init(sc, ATH_RXBUF); + if (error != 0) + goto detach; + + return 0; +detach: + ath_detach(sc); +bad: + return error; } -static void ath9k_bss_info_changed(struct ieee80211_hw *hw, - struct ieee80211_vif *vif, - struct ieee80211_bss_conf *bss_conf, - u32 changed) +static int ath9k_start(struct ieee80211_hw *hw) { struct ath_softc *sc = hw->priv; + struct ieee80211_channel *curchan = hw->conf.channel; + int error = 0, pos; - if (changed & BSS_CHANGED_ERP_PREAMBLE) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed PREAMBLE %d\n", - __func__, - bss_conf->use_short_preamble); - if (bss_conf->use_short_preamble) - sc->sc_flags |= SC_OP_PREAMBLE_SHORT; - else - sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT; - } + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Starting driver with " + "initial channel: %d MHz\n", __func__, curchan->center_freq); - if (changed & BSS_CHANGED_ERP_CTS_PROT) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed CTS PROT %d\n", - __func__, - bss_conf->use_cts_prot); - if (bss_conf->use_cts_prot && - hw->conf.channel->band != IEEE80211_BAND_5GHZ) - sc->sc_flags |= SC_OP_PROTECT_ENABLE; - else - sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; - } + /* setup initial channel */ - if (changed & BSS_CHANGED_HT) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT %d\n", - __func__, - bss_conf->assoc_ht); - ath9k_ht_conf(sc, bss_conf); + pos = ath_get_channel(sc, curchan); + if (pos == -1) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); + return -EINVAL; } - if (changed & BSS_CHANGED_ASSOC) { - DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed ASSOC %d\n", - __func__, - bss_conf->assoc); - ath9k_bss_assoc_info(sc, bss_conf); + sc->sc_ah->ah_channels[pos].chanmode = + (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; + + /* open ath_dev */ + error = ath_open(sc, &sc->sc_ah->ah_channels[pos]); + if (error) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to complete ath_open\n", __func__); + return error; } + + ieee80211_wake_queues(hw); + return 0; } -static u64 ath9k_get_tsf(struct ieee80211_hw *hw) +static int ath9k_tx(struct ieee80211_hw *hw, + struct sk_buff *skb) { - u64 tsf; struct ath_softc *sc = hw->priv; - struct ath_hal *ah = sc->sc_ah; + int hdrlen, padsize; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - tsf = ath9k_hw_gettsf64(ah); + /* + * As a temporary workaround, assign seq# here; this will likely need + * to be cleaned up to work better with Beacon transmission and virtual + * BSSes. + */ + if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; + if (info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT) + sc->seq_no += 0x10; + hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG); + hdr->seq_ctrl |= cpu_to_le16(sc->seq_no); + } - return tsf; + /* Add the padding after the header if this is not already done */ + hdrlen = ieee80211_get_hdrlen_from_skb(skb); + if (hdrlen & 3) { + padsize = hdrlen % 4; + if (skb_headroom(skb) < padsize) + return -1; + skb_push(skb, padsize); + memmove(skb->data, skb->data + padsize, hdrlen); + } + + DPRINTF(sc, ATH_DBG_XMIT, "%s: transmitting packet, skb: %p\n", + __func__, + skb); + + if (ath_tx_start(sc, skb) != 0) { + DPRINTF(sc, ATH_DBG_XMIT, "%s: TX failed\n", __func__); + dev_kfree_skb_any(skb); + /* FIXME: Check for proper return value from ATH_DEV */ + return 0; + } + + return 0; } -static void ath9k_reset_tsf(struct ieee80211_hw *hw) +static void ath9k_stop(struct ieee80211_hw *hw) { struct ath_softc *sc = hw->priv; - struct ath_hal *ah = sc->sc_ah; + int error; - ath9k_hw_reset_tsf(ah); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Driver halt\n", __func__); + + error = ath_suspend(sc); + if (error) + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: Device is no longer present\n", __func__); + + ieee80211_stop_queues(hw); } -static int ath9k_ampdu_action(struct ieee80211_hw *hw, - enum ieee80211_ampdu_mlme_action action, - const u8 *addr, - u16 tid, - u16 *ssn) +static int ath9k_add_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) { struct ath_softc *sc = hw->priv; - int ret = 0; + int error, ic_opmode = 0; - switch (action) { - case IEEE80211_AMPDU_RX_START: - ret = ath_rx_aggr_start(sc, addr, tid, ssn); - if (ret < 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to start RX aggregation\n", - __func__); - break; - case IEEE80211_AMPDU_RX_STOP: - ret = ath_rx_aggr_stop(sc, addr, tid); - if (ret < 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to stop RX aggregation\n", - __func__); + /* Support only vap for now */ + + if (sc->sc_nvaps) + return -ENOBUFS; + + switch (conf->type) { + case IEEE80211_IF_TYPE_STA: + ic_opmode = ATH9K_M_STA; break; - case IEEE80211_AMPDU_TX_START: - ret = ath_tx_aggr_start(sc, addr, tid, ssn); - if (ret < 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to start TX aggregation\n", - __func__); - else - ieee80211_start_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid); + case IEEE80211_IF_TYPE_IBSS: + ic_opmode = ATH9K_M_IBSS; break; - case IEEE80211_AMPDU_TX_STOP: - ret = ath_tx_aggr_stop(sc, addr, tid); - if (ret < 0) - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to stop TX aggregation\n", - __func__); - - ieee80211_stop_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid); + case IEEE80211_IF_TYPE_AP: + ic_opmode = ATH9K_M_HOSTAP; break; default: DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unknown AMPDU action\n", __func__); + "%s: Interface type %d not yet supported\n", + __func__, conf->type); + return -EOPNOTSUPP; } - return ret; + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a VAP of type: %d\n", + __func__, + ic_opmode); + + error = ath_vap_attach(sc, 0, conf->vif, ic_opmode); + if (error) { + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to attach vap, error: %d\n", + __func__, error); + return error; + } + + return 0; } -static struct ieee80211_ops ath9k_ops = { - .tx = ath9k_tx, - .start = ath9k_start, - .stop = ath9k_stop, - .add_interface = ath9k_add_interface, - .remove_interface = ath9k_remove_interface, - .config = ath9k_config, - .config_interface = ath9k_config_interface, - .configure_filter = ath9k_configure_filter, - .get_stats = NULL, - .sta_notify = ath9k_sta_notify, - .conf_tx = ath9k_conf_tx, - .get_tx_stats = NULL, - .bss_info_changed = ath9k_bss_info_changed, - .set_tim = NULL, - .set_key = ath9k_set_key, - .hw_scan = NULL, - .get_tkip_seq = NULL, - .set_rts_threshold = NULL, - .set_frag_threshold = NULL, - .set_retry_limit = NULL, - .get_tsf = ath9k_get_tsf, - .reset_tsf = ath9k_reset_tsf, - .tx_last_beacon = NULL, - .ampdu_action = ath9k_ampdu_action -}; - -void ath_get_beaconconfig(struct ath_softc *sc, - int if_id, - struct ath_beacon_config *conf) -{ - struct ieee80211_hw *hw = sc->hw; - - /* fill in beacon config data */ - - conf->beacon_interval = hw->conf.beacon_int; - conf->listen_interval = 100; - conf->dtim_count = 1; - conf->bmiss_timeout = ATH_DEFAULT_BMISS_LIMIT * conf->listen_interval; -} - -void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, - struct ath_xmit_status *tx_status, struct ath_node *an) +static void ath9k_remove_interface(struct ieee80211_hw *hw, + struct ieee80211_if_init_conf *conf) { - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); + struct ath_softc *sc = hw->priv; + struct ath_vap *avp; + int error; - DPRINTF(sc, ATH_DBG_XMIT, - "%s: TX complete: skb: %p\n", __func__, skb); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach VAP\n", __func__); - if (tx_info->flags & IEEE80211_TX_CTL_NO_ACK || - tx_info->flags & IEEE80211_TX_STAT_TX_FILTERED) { - /* free driver's private data area of tx_info */ - if (tx_info->driver_data[0] != NULL) - kfree(tx_info->driver_data[0]); - tx_info->driver_data[0] = NULL; + avp = sc->sc_vaps[0]; + if (avp == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", + __func__); + return; } - if (tx_status->flags & ATH_TX_BAR) { - tx_info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK; - tx_status->flags &= ~ATH_TX_BAR; - } +#ifdef CONFIG_SLOW_ANT_DIV + ath_slow_ant_div_stop(&sc->sc_antdiv); +#endif - if (tx_status->flags & (ATH_TX_ERROR | ATH_TX_XRETRY)) { - if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { - /* Frame was not ACKed, but an ACK was expected */ - tx_info->status.excessive_retries = 1; - } - } else { - /* Frame was ACKed */ - tx_info->flags |= IEEE80211_TX_STAT_ACK; + /* Update ratectrl */ + ath_rate_newstate(sc, avp); + + /* Reclaim beacon resources */ + if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP || + sc->sc_ah->ah_opmode == ATH9K_M_IBSS) { + ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); + ath_beacon_return(sc, avp); } - tx_info->status.retry_count = tx_status->retries; + /* Set interrupt mask */ + sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); + ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_imask & ~ATH9K_INT_GLOBAL); + sc->sc_flags &= ~SC_OP_BEACONS; - ieee80211_tx_status(hw, skb); - if (an) - ath_node_put(sc, an, ATH9K_BH_STATUS_CHANGE); + error = ath_vap_detach(sc, 0); + if (error) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to detach vap, error: %d\n", + __func__, error); } -int _ath_rx_indicate(struct ath_softc *sc, - struct sk_buff *skb, - struct ath_recv_status *status, - u16 keyix) +static int ath9k_config(struct ieee80211_hw *hw, + struct ieee80211_conf *conf) { - struct ieee80211_hw *hw = sc->hw; - struct ath_node *an = NULL; - struct ieee80211_rx_status rx_status; - struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; - int hdrlen = ieee80211_get_hdrlen_from_skb(skb); - int padsize; - enum ATH_RX_TYPE st; - - /* see if any padding is done by the hw and remove it */ - if (hdrlen & 3) { - padsize = hdrlen % 4; - memmove(skb->data + padsize, skb->data, hdrlen); - skb_pull(skb, padsize); - } - - /* Prepare rx status */ - ath9k_rx_prepare(sc, skb, status, &rx_status); - - if (!(keyix == ATH9K_RXKEYIX_INVALID) && - !(status->flags & ATH_RX_DECRYPT_ERROR)) { - rx_status.flag |= RX_FLAG_DECRYPTED; - } else if ((le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_PROTECTED) - && !(status->flags & ATH_RX_DECRYPT_ERROR) - && skb->len >= hdrlen + 4) { - keyix = skb->data[hdrlen + 3] >> 6; - - if (test_bit(keyix, sc->sc_keymap)) - rx_status.flag |= RX_FLAG_DECRYPTED; - } + struct ath_softc *sc = hw->priv; + struct ieee80211_channel *curchan = hw->conf.channel; + int pos; - spin_lock_bh(&sc->node_lock); - an = ath_node_find(sc, hdr->addr2); - spin_unlock_bh(&sc->node_lock); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set channel: %d MHz\n", + __func__, + curchan->center_freq); - if (an) { - ath_rx_input(sc, an, - hw->conf.ht_conf.ht_supported, - skb, status, &st); + pos = ath_get_channel(sc, curchan); + if (pos == -1) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid channel\n", __func__); + return -EINVAL; } - if (!an || (st != ATH_RX_CONSUMED)) - __ieee80211_rx(hw, skb, &rx_status); - return 0; -} + sc->sc_ah->ah_channels[pos].chanmode = + (curchan->band == IEEE80211_BAND_2GHZ) ? + CHANNEL_G : CHANNEL_A; -int ath_rx_subframe(struct ath_node *an, - struct sk_buff *skb, - struct ath_recv_status *status) -{ - struct ath_softc *sc = an->an_sc; - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_rx_status rx_status; + if (sc->sc_curaid && hw->conf.ht_conf.ht_supported) + sc->sc_ah->ah_channels[pos].chanmode = + ath_get_extchanmode(sc, curchan); - /* Prepare rx status */ - ath9k_rx_prepare(sc, skb, status, &rx_status); - if (!(status->flags & ATH_RX_DECRYPT_ERROR)) - rx_status.flag |= RX_FLAG_DECRYPTED; + sc->sc_config.txpowlimit = 2 * conf->power_level; - __ieee80211_rx(hw, skb, &rx_status); + /* set h/w channel */ + if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) + DPRINTF(sc, ATH_DBG_FATAL, "%s: Unable to set channel\n", + __func__); return 0; } -/********************************/ -/* LED functions */ -/********************************/ - -static void ath_led_brightness(struct led_classdev *led_cdev, - enum led_brightness brightness) +static int ath9k_config_interface(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_if_conf *conf) { - struct ath_led *led = container_of(led_cdev, struct ath_led, led_cdev); - struct ath_softc *sc = led->sc; + struct ath_softc *sc = hw->priv; + struct ath_hal *ah = sc->sc_ah; + struct ath_vap *avp; + u32 rfilt = 0; + int error, i; + DECLARE_MAC_BUF(mac); - switch (brightness) { - case LED_OFF: - if (led->led_type == ATH_LED_ASSOC || - led->led_type == ATH_LED_RADIO) - sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; - ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, - (led->led_type == ATH_LED_RADIO) ? 1 : - !!(sc->sc_flags & SC_OP_LED_ASSOCIATED)); - break; - case LED_FULL: - if (led->led_type == ATH_LED_ASSOC) - sc->sc_flags |= SC_OP_LED_ASSOCIATED; - ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 0); - break; - default: - break; + avp = sc->sc_vaps[0]; + if (avp == NULL) { + DPRINTF(sc, ATH_DBG_FATAL, "%s: Invalid interface\n", + __func__); + return -EINVAL; } -} -static int ath_register_led(struct ath_softc *sc, struct ath_led *led, - char *trigger) -{ - int ret; + /* TODO: Need to decide which hw opmode to use for multi-interface + * cases */ + if (vif->type == IEEE80211_IF_TYPE_AP && + ah->ah_opmode != ATH9K_M_HOSTAP) { + ah->ah_opmode = ATH9K_M_HOSTAP; + ath9k_hw_setopmode(ah); + ath9k_hw_write_associd(ah, sc->sc_myaddr, 0); + /* Request full reset to get hw opmode changed properly */ + sc->sc_flags |= SC_OP_FULL_RESET; + } - led->sc = sc; - led->led_cdev.name = led->name; - led->led_cdev.default_trigger = trigger; - led->led_cdev.brightness_set = ath_led_brightness; + if ((conf->changed & IEEE80211_IFCC_BSSID) && + !is_zero_ether_addr(conf->bssid)) { + switch (vif->type) { + case IEEE80211_IF_TYPE_STA: + case IEEE80211_IF_TYPE_IBSS: + /* Update ratectrl about the new state */ + ath_rate_newstate(sc, avp); - ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev); - if (ret) - DPRINTF(sc, ATH_DBG_FATAL, - "Failed to register led:%s", led->name); - else - led->registered = 1; - return ret; -} + /* Set BSSID */ + memcpy(sc->sc_curbssid, conf->bssid, ETH_ALEN); + sc->sc_curaid = 0; + ath9k_hw_write_associd(sc->sc_ah, sc->sc_curbssid, + sc->sc_curaid); -static void ath_unregister_led(struct ath_led *led) -{ - if (led->registered) { - led_classdev_unregister(&led->led_cdev); - led->registered = 0; - } -} + /* Set aggregation protection mode parameters */ + sc->sc_config.ath_aggr_prot = 0; -static void ath_deinit_leds(struct ath_softc *sc) -{ - ath_unregister_led(&sc->assoc_led); - sc->sc_flags &= ~SC_OP_LED_ASSOCIATED; - ath_unregister_led(&sc->tx_led); - ath_unregister_led(&sc->rx_led); - ath_unregister_led(&sc->radio_led); - ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); -} + /* + * Reset our TSF so that its value is lower than the + * beacon that we are trying to catch. + * Only then hw will update its TSF register with the + * new beacon. Reset the TSF before setting the BSSID + * to avoid allowing in any frames that would update + * our TSF only to have us clear it + * immediately thereafter. + */ + ath9k_hw_reset_tsf(sc->sc_ah); -static void ath_init_leds(struct ath_softc *sc) -{ - char *trigger; - int ret; + /* Disable BMISS interrupt when we're not associated */ + ath9k_hw_set_interrupts(sc->sc_ah, + sc->sc_imask & + ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS)); + sc->sc_imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS); - /* Configure gpio 1 for output */ - ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN, - AR_GPIO_OUTPUT_MUX_AS_OUTPUT); - /* LED off, active low */ - ath9k_hw_set_gpio(sc->sc_ah, ATH_LED_PIN, 1); + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: RX filter 0x%x bssid %s aid 0x%x\n", + __func__, rfilt, + print_mac(mac, sc->sc_curbssid), sc->sc_curaid); - trigger = ieee80211_get_radio_led_name(sc->hw); - snprintf(sc->radio_led.name, sizeof(sc->radio_led.name), - "ath9k-%s:radio", wiphy_name(sc->hw->wiphy)); - ret = ath_register_led(sc, &sc->radio_led, trigger); - sc->radio_led.led_type = ATH_LED_RADIO; - if (ret) - goto fail; + /* need to reconfigure the beacon */ + sc->sc_flags &= ~SC_OP_BEACONS ; - trigger = ieee80211_get_assoc_led_name(sc->hw); - snprintf(sc->assoc_led.name, sizeof(sc->assoc_led.name), - "ath9k-%s:assoc", wiphy_name(sc->hw->wiphy)); - ret = ath_register_led(sc, &sc->assoc_led, trigger); - sc->assoc_led.led_type = ATH_LED_ASSOC; - if (ret) - goto fail; + break; + default: + break; + } + } - trigger = ieee80211_get_tx_led_name(sc->hw); - snprintf(sc->tx_led.name, sizeof(sc->tx_led.name), - "ath9k-%s:tx", wiphy_name(sc->hw->wiphy)); - ret = ath_register_led(sc, &sc->tx_led, trigger); - sc->tx_led.led_type = ATH_LED_TX; - if (ret) - goto fail; + if ((conf->changed & IEEE80211_IFCC_BEACON) && + ((vif->type == IEEE80211_IF_TYPE_IBSS) || + (vif->type == IEEE80211_IF_TYPE_AP))) { + /* + * Allocate and setup the beacon frame. + * + * Stop any previous beacon DMA. This may be + * necessary, for example, when an ibss merge + * causes reconfiguration; we may be called + * with beacon transmission active. + */ + ath9k_hw_stoptxdma(sc->sc_ah, sc->sc_bhalq); - trigger = ieee80211_get_rx_led_name(sc->hw); - snprintf(sc->rx_led.name, sizeof(sc->rx_led.name), - "ath9k-%s:rx", wiphy_name(sc->hw->wiphy)); - ret = ath_register_led(sc, &sc->rx_led, trigger); - sc->rx_led.led_type = ATH_LED_RX; - if (ret) - goto fail; + error = ath_beacon_alloc(sc, 0); + if (error != 0) + return error; - return; + ath_beacon_sync(sc, 0); + } -fail: - ath_deinit_leds(sc); -} + /* Check for WLAN_CAPABILITY_PRIVACY ? */ + if ((avp->av_opmode != IEEE80211_IF_TYPE_STA)) { + for (i = 0; i < IEEE80211_WEP_NKID; i++) + if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i)) + ath9k_hw_keysetmac(sc->sc_ah, + (u16)i, + sc->sc_curbssid); + } -static int ath_detach(struct ath_softc *sc) -{ - struct ieee80211_hw *hw = sc->hw; + /* Only legacy IBSS for now */ + if (vif->type == IEEE80211_IF_TYPE_IBSS) + ath_update_chainmask(sc, 0); - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Detach ATH hw\n", __func__); + return 0; +} - /* Deinit LED control */ - ath_deinit_leds(sc); +#define SUPPORTED_FILTERS \ + (FIF_PROMISC_IN_BSS | \ + FIF_ALLMULTI | \ + FIF_CONTROL | \ + FIF_OTHER_BSS | \ + FIF_BCN_PRBRESP_PROMISC | \ + FIF_FCSFAIL) - /* Unregister hw */ +/* FIXME: sc->sc_full_reset ? */ +static void ath9k_configure_filter(struct ieee80211_hw *hw, + unsigned int changed_flags, + unsigned int *total_flags, + int mc_count, + struct dev_mc_list *mclist) +{ + struct ath_softc *sc = hw->priv; + u32 rfilt; - ieee80211_unregister_hw(hw); + changed_flags &= SUPPORTED_FILTERS; + *total_flags &= SUPPORTED_FILTERS; - /* unregister Rate control */ - ath_rate_control_unregister(); + sc->rx_filter = *total_flags; + rfilt = ath_calcrxfilter(sc); + ath9k_hw_setrxfilter(sc->sc_ah, rfilt); - /* tx/rx cleanup */ + if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { + if (*total_flags & FIF_BCN_PRBRESP_PROMISC) + ath9k_hw_write_associd(sc->sc_ah, ath_bcast_mac, 0); + } - ath_rx_cleanup(sc); - ath_tx_cleanup(sc); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Set HW RX filter: 0x%x\n", + __func__, sc->rx_filter); +} - /* Deinit */ +static void ath9k_sta_notify(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + enum sta_notify_cmd cmd, + const u8 *addr) +{ + struct ath_softc *sc = hw->priv; + struct ath_node *an; + unsigned long flags; + DECLARE_MAC_BUF(mac); - ath_deinit(sc); + spin_lock_irqsave(&sc->node_lock, flags); + an = ath_node_find(sc, (u8 *) addr); + spin_unlock_irqrestore(&sc->node_lock, flags); - return 0; + switch (cmd) { + case STA_NOTIFY_ADD: + spin_lock_irqsave(&sc->node_lock, flags); + if (!an) { + ath_node_attach(sc, (u8 *)addr, 0); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach a node: %s\n", + __func__, + print_mac(mac, addr)); + } else { + ath_node_get(sc, (u8 *)addr); + } + spin_unlock_irqrestore(&sc->node_lock, flags); + break; + case STA_NOTIFY_REMOVE: + if (!an) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Removal of a non-existent node\n", + __func__); + else { + ath_node_put(sc, an, ATH9K_BH_STATUS_INTACT); + DPRINTF(sc, ATH_DBG_CONFIG, "%s: Put a node: %s\n", + __func__, + print_mac(mac, addr)); + } + break; + default: + break; + } } -static int ath_attach(u16 devid, - struct ath_softc *sc) +static int ath9k_conf_tx(struct ieee80211_hw *hw, + u16 queue, + const struct ieee80211_tx_queue_params *params) { - struct ieee80211_hw *hw = sc->hw; - int error = 0; + struct ath_softc *sc = hw->priv; + struct ath9k_tx_queue_info qi; + int ret = 0, qnum; - DPRINTF(sc, ATH_DBG_CONFIG, "%s: Attach ATH hw\n", __func__); + if (queue >= WME_NUM_AC) + return 0; - error = ath_init(devid, sc); - if (error != 0) - return error; + qi.tqi_aifs = params->aifs; + qi.tqi_cwmin = params->cw_min; + qi.tqi_cwmax = params->cw_max; + qi.tqi_burstTime = params->txop; + qnum = ath_get_hal_qnum(queue, sc); - /* Init nodes */ + DPRINTF(sc, ATH_DBG_CONFIG, + "%s: Configure tx [queue/halq] [%d/%d], " + "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n", + __func__, + queue, + qnum, + params->aifs, + params->cw_min, + params->cw_max, + params->txop); - INIT_LIST_HEAD(&sc->node_list); - spin_lock_init(&sc->node_lock); + ret = ath_txq_update(sc, qnum, &qi); + if (ret) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: TXQ Update failed\n", __func__); - /* get mac address from hardware and set in mac80211 */ + return ret; +} - SET_IEEE80211_PERM_ADDR(hw, sc->sc_myaddr); +static int ath9k_set_key(struct ieee80211_hw *hw, + enum set_key_cmd cmd, + const u8 *local_addr, + const u8 *addr, + struct ieee80211_key_conf *key) +{ + struct ath_softc *sc = hw->priv; + int ret = 0; - /* setup channels and rates */ + DPRINTF(sc, ATH_DBG_KEYCACHE, " %s: Set HW Key\n", __func__); - sc->sbands[IEEE80211_BAND_2GHZ].channels = - sc->channels[IEEE80211_BAND_2GHZ]; - sc->sbands[IEEE80211_BAND_2GHZ].bitrates = - sc->rates[IEEE80211_BAND_2GHZ]; - sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; + switch (cmd) { + case SET_KEY: + ret = ath_key_config(sc, addr, key); + if (!ret) { + set_bit(key->keyidx, sc->sc_keymap); + key->hw_key_idx = key->keyidx; + /* push IV and Michael MIC generation to stack */ + key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; + if (key->alg == ALG_TKIP) + key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC; + } + break; + case DISABLE_KEY: + ath_key_delete(sc, key); + clear_bit(key->keyidx, sc->sc_keymap); + sc->sc_keytype = ATH9K_CIPHER_CLR; + break; + default: + ret = -EINVAL; + } - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) - /* Setup HT capabilities for 2.4Ghz*/ - setup_ht_cap(&sc->sbands[IEEE80211_BAND_2GHZ].ht_info); + return ret; +} - hw->wiphy->bands[IEEE80211_BAND_2GHZ] = - &sc->sbands[IEEE80211_BAND_2GHZ]; +static void ath9k_bss_info_changed(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_bss_conf *bss_conf, + u32 changed) +{ + struct ath_softc *sc = hw->priv; - if (test_bit(ATH9K_MODE_11A, sc->sc_ah->ah_caps.wireless_modes)) { - sc->sbands[IEEE80211_BAND_5GHZ].channels = - sc->channels[IEEE80211_BAND_5GHZ]; - sc->sbands[IEEE80211_BAND_5GHZ].bitrates = - sc->rates[IEEE80211_BAND_5GHZ]; - sc->sbands[IEEE80211_BAND_5GHZ].band = - IEEE80211_BAND_5GHZ; + if (changed & BSS_CHANGED_ERP_PREAMBLE) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed PREAMBLE %d\n", + __func__, + bss_conf->use_short_preamble); + if (bss_conf->use_short_preamble) + sc->sc_flags |= SC_OP_PREAMBLE_SHORT; + else + sc->sc_flags &= ~SC_OP_PREAMBLE_SHORT; + } - if (sc->sc_ah->ah_caps.hw_caps & ATH9K_HW_CAP_HT) - /* Setup HT capabilities for 5Ghz*/ - setup_ht_cap(&sc->sbands[IEEE80211_BAND_5GHZ].ht_info); + if (changed & BSS_CHANGED_ERP_CTS_PROT) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed CTS PROT %d\n", + __func__, + bss_conf->use_cts_prot); + if (bss_conf->use_cts_prot && + hw->conf.channel->band != IEEE80211_BAND_5GHZ) + sc->sc_flags |= SC_OP_PROTECT_ENABLE; + else + sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; + } - hw->wiphy->bands[IEEE80211_BAND_5GHZ] = - &sc->sbands[IEEE80211_BAND_5GHZ]; + if (changed & BSS_CHANGED_HT) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed HT %d\n", + __func__, + bss_conf->assoc_ht); + ath9k_ht_conf(sc, bss_conf); } - /* FIXME: Have to figure out proper hw init values later */ + if (changed & BSS_CHANGED_ASSOC) { + DPRINTF(sc, ATH_DBG_CONFIG, "%s: BSS Changed ASSOC %d\n", + __func__, + bss_conf->assoc); + ath9k_bss_assoc_info(sc, bss_conf); + } +} - hw->queues = 4; - hw->ampdu_queues = 1; +static u64 ath9k_get_tsf(struct ieee80211_hw *hw) +{ + u64 tsf; + struct ath_softc *sc = hw->priv; + struct ath_hal *ah = sc->sc_ah; - /* Register rate control */ - hw->rate_control_algorithm = "ath9k_rate_control"; - error = ath_rate_control_register(); - if (error != 0) { - DPRINTF(sc, ATH_DBG_FATAL, - "%s: Unable to register rate control " - "algorithm:%d\n", __func__, error); - ath_rate_control_unregister(); - goto bad; - } + tsf = ath9k_hw_gettsf64(ah); - error = ieee80211_register_hw(hw); - if (error != 0) { - ath_rate_control_unregister(); - goto bad; - } + return tsf; +} - /* Initialize LED control */ - ath_init_leds(sc); +static void ath9k_reset_tsf(struct ieee80211_hw *hw) +{ + struct ath_softc *sc = hw->priv; + struct ath_hal *ah = sc->sc_ah; - /* initialize tx/rx engine */ + ath9k_hw_reset_tsf(ah); +} - error = ath_tx_init(sc, ATH_TXBUF); - if (error != 0) - goto detach; +static int ath9k_ampdu_action(struct ieee80211_hw *hw, + enum ieee80211_ampdu_mlme_action action, + const u8 *addr, + u16 tid, + u16 *ssn) +{ + struct ath_softc *sc = hw->priv; + int ret = 0; - error = ath_rx_init(sc, ATH_RXBUF); - if (error != 0) - goto detach; + switch (action) { + case IEEE80211_AMPDU_RX_START: + ret = ath_rx_aggr_start(sc, addr, tid, ssn); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to start RX aggregation\n", + __func__); + break; + case IEEE80211_AMPDU_RX_STOP: + ret = ath_rx_aggr_stop(sc, addr, tid); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to stop RX aggregation\n", + __func__); + break; + case IEEE80211_AMPDU_TX_START: + ret = ath_tx_aggr_start(sc, addr, tid, ssn); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to start TX aggregation\n", + __func__); + else + ieee80211_start_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid); + break; + case IEEE80211_AMPDU_TX_STOP: + ret = ath_tx_aggr_stop(sc, addr, tid); + if (ret < 0) + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unable to stop TX aggregation\n", + __func__); - return 0; -detach: - ath_detach(sc); -bad: - return error; + ieee80211_stop_tx_ba_cb_irqsafe(hw, (u8 *)addr, tid); + break; + default: + DPRINTF(sc, ATH_DBG_FATAL, + "%s: Unknown AMPDU action\n", __func__); + } + + return ret; } +static struct ieee80211_ops ath9k_ops = { + .tx = ath9k_tx, + .start = ath9k_start, + .stop = ath9k_stop, + .add_interface = ath9k_add_interface, + .remove_interface = ath9k_remove_interface, + .config = ath9k_config, + .config_interface = ath9k_config_interface, + .configure_filter = ath9k_configure_filter, + .get_stats = NULL, + .sta_notify = ath9k_sta_notify, + .conf_tx = ath9k_conf_tx, + .get_tx_stats = NULL, + .bss_info_changed = ath9k_bss_info_changed, + .set_tim = NULL, + .set_key = ath9k_set_key, + .hw_scan = NULL, + .get_tkip_seq = NULL, + .set_rts_threshold = NULL, + .set_frag_threshold = NULL, + .set_retry_limit = NULL, + .get_tsf = ath9k_get_tsf, + .reset_tsf = ath9k_reset_tsf, + .tx_last_beacon = NULL, + .ampdu_action = ath9k_ampdu_action +}; + static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { void __iomem *mem; -- 2.20.1