From 8e5f6b2a289c4374456fb785900b0b7445b719e6 Mon Sep 17 00:00:00 2001 From: Romain Baeriswyl Date: Wed, 20 Aug 2014 16:29:08 +0200 Subject: [PATCH] i2c: designware: add support of I2C standard mode Some legacy devices support ony I2C standard mode at 100kHz. This patch allows to select the standard mode through the DTS with the use of the existing clock-frequency parameter. When clock-frequency parameter is not set, the fast mode is selected. Only when the parameter is set at 100000, the standard mode is selected. Signed-off-by: Romain Baeriswyl Reviewed-by: Christian Ruppert Acked-by: Alan Tull Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 23 +++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index bc8773333155..8193e8eea764 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -123,6 +123,7 @@ static int dw_i2c_probe(struct platform_device *pdev) struct i2c_adapter *adap; struct resource *mem; int irq, r; + u32 clk_freq; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -152,6 +153,9 @@ static int dw_i2c_probe(struct platform_device *pdev) return PTR_ERR(dev->clk); clk_prepare_enable(dev->clk); + /* fast mode by default because of legacy reasons */ + clk_freq = 400000; + if (pdev->dev.of_node) { u32 ht = 0; u32 ic_clk = dev->get_clk_rate_khz(dev); @@ -167,6 +171,17 @@ static int dw_i2c_probe(struct platform_device *pdev) of_property_read_u32(pdev->dev.of_node, "i2c-scl-falling-time-ns", &dev->scl_falling_time); + + of_property_read_u32(pdev->dev.of_node, "clock-frequency", + &clk_freq); + + /* Only standard mode at 100kHz and fast mode at 400kHz + * are supported. + */ + if (clk_freq != 100000 && clk_freq != 400000) { + dev_err(&pdev->dev, "Only 100kHz and 400kHz supported"); + return -EINVAL; + } } dev->functionality = @@ -176,8 +191,12 @@ static int dw_i2c_probe(struct platform_device *pdev) I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_I2C_BLOCK; - dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | - DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; + if (clk_freq == 100000) + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_STD; + else + dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | + DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; /* Try first if we can configure the device from ACPI */ r = dw_i2c_acpi_configure(pdev); -- 2.20.1