From 8d9c1f86a303de8fb631fb6b76260cb1fa8883a1 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Sat, 22 Oct 2016 20:32:31 +0300 Subject: [PATCH] scsi: cciss: replace custom function to hexdump For small buffers we may use %*ph[N] specifier, for the bigger blocks print_hex_dump() call. Cc: Don Brace Cc: esc.storagedev@microsemi.com Signed-off-by: Andy Shevchenko Acked-by: Don Brace Signed-off-by: Martin K. Petersen --- drivers/block/cciss_scsi.c | 72 ++++++-------------------------------- 1 file changed, 10 insertions(+), 62 deletions(-) diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 1537302e56e3..a18de9d727b0 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -260,43 +260,6 @@ scsi_cmd_stack_free(ctlr_info_t *h) } #if 0 -static int xmargin=8; -static int amargin=60; - -static void -print_bytes (unsigned char *c, int len, int hex, int ascii) -{ - - int i; - unsigned char *x; - - if (hex) - { - x = c; - for (i=0;i0) printk("\n"); - if ((i % xmargin) == 0) printk("0x%04x:", i); - printk(" %02x", *x); - x++; - } - printk("\n"); - } - if (ascii) - { - x = c; - for (i=0;i0) printk("\n"); - if ((i % amargin) == 0) printk("0x%04x:", i); - if (*x > 26 && *x < 128) printk("%c", *x); - else printk("."); - x++; - } - printk("\n"); - } -} - static void print_cmd(CommandList_struct *cp) { @@ -305,30 +268,13 @@ print_cmd(CommandList_struct *cp) printk("sgtot:%d\n", cp->Header.SGTotal); printk("Tag:0x%08x/0x%08x\n", cp->Header.Tag.upper, cp->Header.Tag.lower); - printk("LUN:0x%02x%02x%02x%02x%02x%02x%02x%02x\n", - cp->Header.LUN.LunAddrBytes[0], - cp->Header.LUN.LunAddrBytes[1], - cp->Header.LUN.LunAddrBytes[2], - cp->Header.LUN.LunAddrBytes[3], - cp->Header.LUN.LunAddrBytes[4], - cp->Header.LUN.LunAddrBytes[5], - cp->Header.LUN.LunAddrBytes[6], - cp->Header.LUN.LunAddrBytes[7]); + printk("LUN:0x%8phN\n", cp->Header.LUN.LunAddrBytes); printk("CDBLen:%d\n", cp->Request.CDBLen); printk("Type:%d\n",cp->Request.Type.Type); printk("Attr:%d\n",cp->Request.Type.Attribute); printk(" Dir:%d\n",cp->Request.Type.Direction); printk("Timeout:%d\n",cp->Request.Timeout); - printk( "CDB: %02x %02x %02x %02x %02x %02x %02x %02x" - " %02x %02x %02x %02x %02x %02x %02x %02x\n", - cp->Request.CDB[0], cp->Request.CDB[1], - cp->Request.CDB[2], cp->Request.CDB[3], - cp->Request.CDB[4], cp->Request.CDB[5], - cp->Request.CDB[6], cp->Request.CDB[7], - cp->Request.CDB[8], cp->Request.CDB[9], - cp->Request.CDB[10], cp->Request.CDB[11], - cp->Request.CDB[12], cp->Request.CDB[13], - cp->Request.CDB[14], cp->Request.CDB[15]), + printk("CDB: %16ph\n", cp->Request.CDB); printk("edesc.Addr: 0x%08x/0%08x, Len = %d\n", cp->ErrDesc.Addr.upper, cp->ErrDesc.Addr.lower, cp->ErrDesc.Len); @@ -340,9 +286,7 @@ print_cmd(CommandList_struct *cp) printk("offense size:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_size); printk("offense byte:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_num); printk("offense value:%d\n", cp->err_info->MoreErrInfo.Invalid_Cmd.offense_value); - } - #endif static int @@ -782,8 +726,10 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, "reported\n", c); break; case CMD_INVALID: { - /* print_bytes(c, sizeof(*c), 1, 0); - print_cmd(c); */ + /* + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, c, sizeof(*c), false); + print_cmd(c); + */ /* We get CMD_INVALID if you address a non-existent tape drive instead of a selection timeout (no response). You will see this if you yank out a tape drive, then try to access it. This is kind of a shame @@ -985,8 +931,10 @@ cciss_scsi_interpret_error(ctlr_info_t *h, CommandList_struct *c) dev_warn(&h->pdev->dev, "%p is reported invalid (probably means " "target device no longer present)\n", c); - /* print_bytes((unsigned char *) c, sizeof(*c), 1, 0); - print_cmd(c); */ + /* + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 1, c, sizeof(*c), false); + print_cmd(c); + */ } break; case CMD_PROTOCOL_ERR: -- 2.20.1