From 8d55881c9d45f891f5e5d545719af2c2e4706dfd Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Wed, 16 Aug 2017 19:15:01 +0530 Subject: [PATCH] ARM: dts: dra7-evm: Add pinmux configuration for MMC Include dra74x-mmc-iodelay.dtsi which has pinmux and IODelay configuration values for the various MMC modes for dra74 SoC and use it in the pinctrl properties of MMC devicetree nodes present in dra7-evm. Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 5e3f9ba861f0..aa426dabb6c3 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -9,6 +9,7 @@ #include "dra74x.dtsi" #include "dra7-evm-common.dtsi" +#include "dra74x-mmc-iodelay.dtsi" / { model = "TI DRA742"; @@ -326,8 +327,6 @@ &mmc1 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins_default>; vmmc-supply = <&evm_3v3_sd>; vqmmc-supply = <&ldo1_reg>; bus-width = <4>; @@ -336,14 +335,29 @@ * is always hardwired. */ cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_hs>; + pinctrl-2 = <&mmc1_pins_sdr12>; + pinctrl-3 = <&mmc1_pins_sdr25>; + pinctrl-4 = <&mmc1_pins_sdr50>; + pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>; + pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>; + pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>; + pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>; }; &mmc2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_default>; vmmc-supply = <&evm_1v8_sw>; bus-width = <8>; + pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_hs>; + pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>; + pinctrl-3 = <&mmc2_pins_ddr_rev20>; + pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>; + pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>; }; &cpu0 { -- 2.20.1