From 8cf4345575a416e6856a6856ac6eaa31ad883126 Mon Sep 17 00:00:00 2001 From: "Agrawal, Nitesh-kumar" Date: Tue, 26 Jul 2016 08:28:19 +0000 Subject: [PATCH] pinctrl/amd: Remove the default de-bounce time MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit In the function amd_gpio_irq_enable() and amd_gpio_direction_input(), remove the code which is setting the default de-bounce time to 2.75ms. The driver code shall use the same settings as specified in BIOS. Any default assignment impacts TouchPad behaviour when the LevelTrig is set to EDGE FALLING. Cc: stable@vger.kernel.org Reviewed-by:  Ken Xue Signed-off-by: Nitesh Kumar Agrawal Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-amd.c | 20 -------------------- 1 file changed, 20 deletions(-) diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 634b4d30eefb..b3e772390ab6 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -43,17 +43,6 @@ static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset) spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + offset * 4); - /* - * Suppose BIOS or Bootloader sets specific debounce for the - * GPIO. if not, set debounce to be 2.75ms and remove glitch. - */ - if ((pin_reg & DB_TMR_OUT_MASK) == 0) { - pin_reg |= 0xf; - pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF); - pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF; - pin_reg &= ~BIT(DB_TMR_LARGE_OFF); - } - pin_reg &= ~BIT(OUTPUT_ENABLE_OFF); writel(pin_reg, gpio_dev->base + offset * 4); spin_unlock_irqrestore(&gpio_dev->lock, flags); @@ -326,15 +315,6 @@ static void amd_gpio_irq_enable(struct irq_data *d) spin_lock_irqsave(&gpio_dev->lock, flags); pin_reg = readl(gpio_dev->base + (d->hwirq)*4); - /* - Suppose BIOS or Bootloader sets specific debounce for the - GPIO. if not, set debounce to be 2.75ms. - */ - if ((pin_reg & DB_TMR_OUT_MASK) == 0) { - pin_reg |= 0xf; - pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF); - pin_reg &= ~BIT(DB_TMR_LARGE_OFF); - } pin_reg |= BIT(INTERRUPT_ENABLE_OFF); pin_reg |= BIT(INTERRUPT_MASK_OFF); writel(pin_reg, gpio_dev->base + (d->hwirq)*4); -- 2.20.1