From 8c73aff6d3b772e5f373d78bc34fd47b10b35fef Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 22 Nov 2007 21:00:30 +0900 Subject: [PATCH] USB: m66592-udc: Add support for SH7722 USBF Add support for SuperH SH7722 USB Function. M66592 is similar to SH7722 USBF. It can support SH7722 USBF by changing several M66592 code. Signed-off-by: Yoshihiro Shimoda Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 10 ++++++ drivers/usb/gadget/m66592-udc.c | 55 ++++++++++++++++++++++++++++++++- drivers/usb/gadget/m66592-udc.h | 54 ++++++++++++++++++++++++++++++++ 3 files changed, 118 insertions(+), 1 deletion(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 77a3759d6fc7..e706882a8e6f 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -220,6 +220,16 @@ config USB_M66592 default USB_GADGET select USB_GADGET_SELECTED +config SUPERH_BUILT_IN_M66592 + boolean "Enable SuperH built-in USB like the M66592" + depends on USB_GADGET_M66592 && CPU_SUBTYPE_SH7722 + help + SH7722 has USB like the M66592. + + The transfer rate is very slow when use "Ethernet Gadget". + However, this problem is improved if change a value of + NET_IP_ALIGN to 4. + config USB_GADGET_GOKU boolean "Toshiba TC86C001 'Goku-S'" depends on PCI diff --git a/drivers/usb/gadget/m66592-udc.c b/drivers/usb/gadget/m66592-udc.c index ebc5536aa271..154007aa8d30 100644 --- a/drivers/usb/gadget/m66592-udc.c +++ b/drivers/usb/gadget/m66592-udc.c @@ -36,9 +36,14 @@ MODULE_DESCRIPTION("M66592 USB gadget driver"); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Yoshihiro Shimoda"); -#define DRIVER_VERSION "29 May 2007" +#define DRIVER_VERSION "18 Oct 2007" /* module parameters */ +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) +static unsigned short endian = M66592_LITTLE; +module_param(endian, ushort, 0644); +MODULE_PARM_DESC(endian, "data endian: big=0, little=0 (default=0)"); +#else static unsigned short clock = M66592_XTAL24; module_param(clock, ushort, 0644); MODULE_PARM_DESC(clock, "input clock: 48MHz=32768, 24MHz=16384, 12MHz=0 " @@ -56,6 +61,7 @@ static unsigned short irq_sense = M66592_INTL; module_param(irq_sense, ushort, 0644); MODULE_PARM_DESC(irq_sense, "IRQ sense: low level=2, falling edge=0 " "(default=2)"); +#endif static const char udc_name[] = "m66592_udc"; static const char *m66592_ep_name[] = { @@ -360,6 +366,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, ep->fifosel = M66592_D0FIFOSEL; ep->fifoctr = M66592_D0FIFOCTR; ep->fifotrn = M66592_D0FIFOTRN; +#if !defined(CONFIG_SUPERH_BUILT_IN_M66592) } else if (m66592->num_dma == 1) { m66592->num_dma++; ep->use_dma = 1; @@ -367,6 +374,7 @@ static void m66592_ep_setting(struct m66592 *m66592, struct m66592_ep *ep, ep->fifosel = M66592_D1FIFOSEL; ep->fifoctr = M66592_D1FIFOCTR; ep->fifotrn = M66592_D1FIFOTRN; +#endif } else { ep->use_dma = 0; ep->fifoaddr = M66592_CFIFO; @@ -611,6 +619,28 @@ static void start_ep0(struct m66592_ep *ep, struct m66592_request *req) } } +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) +static void init_controller(struct m66592 *m66592) +{ + usbf_start_clock(); + m66592_bset(m66592, M66592_HSE, M66592_SYSCFG); /* High spd */ + m66592_bclr(m66592, M66592_USBE, M66592_SYSCFG); + m66592_bclr(m66592, M66592_DPRPU, M66592_SYSCFG); + m66592_bset(m66592, M66592_USBE, M66592_SYSCFG); + + /* This is a workaound for SH7722 2nd cut */ + m66592_bset(m66592, 0x8000, M66592_DVSTCTR); + m66592_bset(m66592, 0x1000, M66592_TESTMODE); + m66592_bclr(m66592, 0x8000, M66592_DVSTCTR); + + m66592_bset(m66592, M66592_INTL, M66592_INTENB1); + + m66592_write(m66592, 0, M66592_CFBCFG); + m66592_write(m66592, 0, M66592_D0FBCFG); + m66592_bset(m66592, endian, M66592_CFBCFG); + m66592_bset(m66592, endian, M66592_D0FBCFG); +} +#else /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ static void init_controller(struct m66592 *m66592) { m66592_bset(m66592, (vif & M66592_LDRV) | (endian & M66592_BIGEND), @@ -636,9 +666,13 @@ static void init_controller(struct m66592 *m66592) m66592_write(m66592, M66592_BURST | M66592_CPU_ADR_RD_WR, M66592_DMA0CFG); } +#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ static void disable_controller(struct m66592 *m66592) { +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) + usbf_stop_clock(); +#else m66592_bclr(m66592, M66592_SCKE, M66592_SYSCFG); udelay(1); m66592_bclr(m66592, M66592_PLLC, M66592_SYSCFG); @@ -646,15 +680,20 @@ static void disable_controller(struct m66592 *m66592) m66592_bclr(m66592, M66592_RCKE, M66592_SYSCFG); udelay(1); m66592_bclr(m66592, M66592_XCKE, M66592_SYSCFG); +#endif } static void m66592_start_xclock(struct m66592 *m66592) { +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) + usbf_start_clock(); +#else u16 tmp; tmp = m66592_read(m66592, M66592_SYSCFG); if (!(tmp & M66592_XCKE)) m66592_bset(m66592, M66592_XCKE, M66592_SYSCFG); +#endif } /*-------------------------------------------------------------------------*/ @@ -1142,6 +1181,19 @@ static irqreturn_t m66592_irq(int irq, void *_m66592) intsts0 = m66592_read(m66592, M66592_INTSTS0); intenb0 = m66592_read(m66592, M66592_INTENB0); +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) + if (!intsts0 && !intenb0) { + /* + * When USB clock stops, it cannot read register. Even if a + * clock stops, the interrupt occurs. So this driver turn on + * a clock by this timing and do re-reading of register. + */ + m66592_start_xclock(m66592); + intsts0 = m66592_read(m66592, M66592_INTSTS0); + intenb0 = m66592_read(m66592, M66592_INTENB0); + } +#endif + savepipe = m66592_read(m66592, M66592_CFIFOSEL); mask0 = intsts0 & intenb0; @@ -1485,6 +1537,7 @@ static int __exit m66592_remove(struct platform_device *pdev) iounmap(m66592->reg); free_irq(platform_get_irq(pdev, 0), m66592); m66592_free_request(&m66592->ep[0].ep, m66592->ep0_req); + usbf_stop_clock(); kfree(m66592); return 0; } diff --git a/drivers/usb/gadget/m66592-udc.h b/drivers/usb/gadget/m66592-udc.h index bfa0c645f229..17b792b7f6bf 100644 --- a/drivers/usb/gadget/m66592-udc.h +++ b/drivers/usb/gadget/m66592-udc.h @@ -72,6 +72,11 @@ #define M66592_P_TST_J 0x0001 /* PERI TEST J */ #define M66592_P_TST_NORMAL 0x0000 /* PERI Normal Mode */ +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) +#define M66592_CFBCFG 0x0A +#define M66592_D0FBCFG 0x0C +#define M66592_LITTLE 0x0100 /* b8: Little endian mode */ +#else #define M66592_PINCFG 0x0A #define M66592_LDRV 0x8000 /* b15: Drive Current Adjust */ #define M66592_BIGEND 0x0100 /* b8: Big endian mode */ @@ -91,6 +96,7 @@ #define M66592_PKTM 0x0020 /* b5: Packet mode */ #define M66592_DENDE 0x0010 /* b4: Dend enable */ #define M66592_OBUS 0x0004 /* b2: OUTbus mode */ +#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ #define M66592_CFIFO 0x10 #define M66592_D0FIFO 0x14 @@ -103,9 +109,13 @@ #define M66592_REW 0x4000 /* b14: Buffer rewind */ #define M66592_DCLRM 0x2000 /* b13: DMA buffer clear mode */ #define M66592_DREQE 0x1000 /* b12: DREQ output enable */ +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) +#define M66592_MBW 0x0800 /* b11: Maximum bit width for FIFO */ +#else #define M66592_MBW 0x0400 /* b10: Maximum bit width for FIFO */ #define M66592_MBW_8 0x0000 /* 8bit */ #define M66592_MBW_16 0x0400 /* 16bit */ +#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ #define M66592_TRENB 0x0200 /* b9: Transaction counter enable */ #define M66592_TRCLR 0x0100 /* b8: Transaction counter clear */ #define M66592_DEZPM 0x0080 /* b7: Zero-length packet mode */ @@ -530,8 +540,13 @@ static inline void m66592_read_fifo(struct m66592 *m66592, { unsigned long fifoaddr = (unsigned long)m66592->reg + offset; +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) + len = (len + 3) / 4; + insl(fifoaddr, buf, len); +#else len = (len + 1) / 2; insw(fifoaddr, buf, len); +#endif } static inline void m66592_write(struct m66592 *m66592, u16 val, @@ -545,6 +560,24 @@ static inline void m66592_write_fifo(struct m66592 *m66592, void *buf, unsigned long len) { unsigned long fifoaddr = (unsigned long)m66592->reg + offset; +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) + unsigned long count; + unsigned char *pb; + int i; + + count = len / 4; + outsl(fifoaddr, buf, count); + + if (len & 0x00000003) { + pb = buf + count * 4; + for (i = 0; i < (len & 0x00000003); i++) { + if (m66592_read(m66592, M66592_CFBCFG)) /* little */ + outb(pb[i], fifoaddr + (3 - i)); + else + outb(pb[i], fifoaddr + i); + } + } +#else unsigned long odd = len & 0x0001; len = len / 2; @@ -553,6 +586,7 @@ static inline void m66592_write_fifo(struct m66592 *m66592, unsigned char *p = buf + len*2; outb(*p, fifoaddr); } +#endif /* #if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ } static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat, @@ -570,6 +604,26 @@ static inline void m66592_mdfy(struct m66592 *m66592, u16 val, u16 pat, #define m66592_bset(m66592, val, offset) \ m66592_mdfy(m66592, val, 0, offset) +#if defined(CONFIG_SUPERH_BUILT_IN_M66592) +#include +#define MSTPCR2 0xA4150038 /* for SH7722 */ +#define MSTPCR2_USB 0x00000800 + +static inline void usbf_start_clock(void) +{ + ctrl_outl(ctrl_inl(MSTPCR2) & ~MSTPCR2_USB, MSTPCR2); +} + +static inline void usbf_stop_clock(void) +{ + ctrl_outl(ctrl_inl(MSTPCR2) | MSTPCR2_USB, MSTPCR2); +} + +#else +#define usbf_start_clock(x) +#define usbf_stop_clock(x) +#endif /* if defined(CONFIG_SUPERH_BUILT_IN_M66592) */ + #endif /* ifndef __M66592_UDC_H__ */ -- 2.20.1