From 8b648436eb45c1f561164b24aafd35fb2bee9cfc Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Tue, 22 Dec 2015 11:43:29 +0100 Subject: [PATCH] dmaengine: mv_xor: add suspend/resume support This commit adds suspend/resume support to the mv_xor driver. The config and interrupt mask registers must be saved and restored, and upon resume, the MBus windows configuration must also be done again. Tested on Armada 388 GP, with a RAID 5 array, accessed before and after a suspend to RAM cycle. Based on work from Ofer Heifetz and Lior Amsalem. Signed-off-by: Thomas Petazzoni Signed-off-by: Vinod Koul --- drivers/dma/mv_xor.c | 53 ++++++++++++++++++++++++++++++++++++++++++++ drivers/dma/mv_xor.h | 1 + 2 files changed, 54 insertions(+) diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index a95878cd36d9..14091f878f80 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -1085,6 +1085,57 @@ mv_xor_conf_mbus_windows(struct mv_xor_device *xordev, writel(0, base + WINDOW_OVERRIDE_CTRL(1)); } +/* + * Since this XOR driver is basically used only for RAID5, we don't + * need to care about synchronizing ->suspend with DMA activity, + * because the DMA engine will naturally be quiet due to the block + * devices being suspended. + */ +static int mv_xor_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct mv_xor_device *xordev = platform_get_drvdata(pdev); + int i; + + for (i = 0; i < MV_XOR_MAX_CHANNELS; i++) { + struct mv_xor_chan *mv_chan = xordev->channels[i]; + + if (!mv_chan) + continue; + + mv_chan->saved_config_reg = + readl_relaxed(XOR_CONFIG(mv_chan)); + mv_chan->saved_int_mask_reg = + readl_relaxed(XOR_INTR_MASK(mv_chan)); + } + + return 0; +} + +static int mv_xor_resume(struct platform_device *dev) +{ + struct mv_xor_device *xordev = platform_get_drvdata(dev); + const struct mbus_dram_target_info *dram; + int i; + + for (i = 0; i < MV_XOR_MAX_CHANNELS; i++) { + struct mv_xor_chan *mv_chan = xordev->channels[i]; + + if (!mv_chan) + continue; + + writel_relaxed(mv_chan->saved_config_reg, + XOR_CONFIG(mv_chan)); + writel_relaxed(mv_chan->saved_int_mask_reg, + XOR_INTR_MASK(mv_chan)); + } + + dram = mv_mbus_dram_info(); + if (dram) + mv_xor_conf_mbus_windows(xordev, dram); + + return 0; +} + static const struct of_device_id mv_xor_dt_ids[] = { { .compatible = "marvell,orion-xor", .data = (void *)XOR_MODE_IN_REG }, { .compatible = "marvell,armada-380-xor", .data = (void *)XOR_MODE_IN_DESC }, @@ -1246,6 +1297,8 @@ err_channel_add: static struct platform_driver mv_xor_driver = { .probe = mv_xor_probe, + .suspend = mv_xor_suspend, + .resume = mv_xor_resume, .driver = { .name = MV_XOR_NAME, .of_match_table = of_match_ptr(mv_xor_dt_ids), diff --git a/drivers/dma/mv_xor.h b/drivers/dma/mv_xor.h index 34389146bf13..c19fe30e5ae9 100644 --- a/drivers/dma/mv_xor.h +++ b/drivers/dma/mv_xor.h @@ -125,6 +125,7 @@ struct mv_xor_chan { char dummy_src[MV_XOR_MIN_BYTE_COUNT]; char dummy_dst[MV_XOR_MIN_BYTE_COUNT]; dma_addr_t dummy_src_addr, dummy_dst_addr; + u32 saved_config_reg, saved_int_mask_reg; }; /** -- 2.20.1