From 898e6861ff7cfc9f539b57859a27fbd1fe4298ae Mon Sep 17 00:00:00 2001 From: =?utf8?q?Noralf=20Tr=C3=B8nnes?= Date: Wed, 17 Jun 2015 16:04:04 +0200 Subject: [PATCH] watchdog: bcm2835: Fix poweroff behaviour MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Currently poweroff/halt results in a reboot on the Raspberry Pi. The firmware uses the RSTS register to know which partiton to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. Partiton 63 is a special partition used by the firmware to indicate halt. The firmware made this change in 19 Aug 2013 and was matched by the downstream commit: Changes for new NOOBS multi partition booting from gsh Signed-off-by: Noralf Trønnes Tested-by: Stephen Warren Acked-by: Stephen Warren Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/bcm2835_wdt.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c index 66c3e656a616..8a5ce5b5a0b6 100644 --- a/drivers/watchdog/bcm2835_wdt.c +++ b/drivers/watchdog/bcm2835_wdt.c @@ -36,6 +36,13 @@ #define PM_RSTC_WRCFG_FULL_RESET 0x00000020 #define PM_RSTC_RESET 0x00000102 +/* + * The Raspberry Pi firmware uses the RSTS register to know which partiton + * to boot from. The partiton value is spread into bits 0, 2, 4, 6, 8, 10. + * Partiton 63 is a special partition used by the firmware to indicate halt. + */ +#define PM_RSTS_RASPBERRYPI_HALT 0x555 + #define SECS_TO_WDOG_TICKS(x) ((x) << 16) #define WDOG_TICKS_TO_SECS(x) ((x) >> 16) @@ -151,8 +158,7 @@ static void bcm2835_power_off(void) * hard reset. */ val = readl_relaxed(wdt->base + PM_RSTS); - val &= PM_RSTC_WRCFG_CLR; - val |= PM_PASSWORD | PM_RSTS_HADWRH_SET; + val |= PM_PASSWORD | PM_RSTS_RASPBERRYPI_HALT; writel_relaxed(val, wdt->base + PM_RSTS); /* Continue with normal reset mechanism */ -- 2.20.1