From 892c9e0872bea23ac2dc774ea950e6526f157bd5 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Tue, 7 Jun 2016 16:08:48 -0700 Subject: [PATCH] fm10k: perform data path reset even when switch is not ready A while ago, an additional check for the switch being ready was added to reset_hw. A recent refactor accidentally made this check return an error code on failure which caused fm10k_probe to fail when the switch wasn't brought up first. The original reasoning for the check was to prevent additional data path reset when the fabric wasn't ready yet. However, there isn't a compelling reason to keep the check, as the data path reset will restore hardware to a known good state. Remove the check and perform the data path reset regardless of the switch manager state. An alternative fix is to return FM10K_SUCCESS instead, and bypass the actual data path reset. This should be fine as we will perform a reset_hw once the switch is active. However, since data path reset will reset many parts of the hardware it seems better to just perform the reset regardless of switch state. Signed-off-by: Jacob Keller Tested-by: Krishneil Singh Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/fm10k/fm10k_pf.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c index 7fbd94ba6745..23f3566b17fc 100644 --- a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c @@ -63,11 +63,6 @@ static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw) if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE)) return FM10K_ERR_DMA_PENDING; - /* verify the switch is ready for reset */ - reg = fm10k_read_reg(hw, FM10K_DMA_CTRL2); - if (!(reg & FM10K_DMA_CTRL2_SWITCH_READY)) - return FM10K_ERR_DMA_PENDING; - force_reset: /* Inititate data path reset */ reg = FM10K_DMA_CTRL_DATAPATH_RESET; -- 2.20.1