From 88404312556c10e4bcd1aeeb75b1b7e9e3226160 Mon Sep 17 00:00:00 2001 From: Xiaolei Li Date: Fri, 23 Jun 2017 15:12:25 +0800 Subject: [PATCH] mtd: nand: mtk: disable ecc irq when writing page with hwecc Currently, ecc encode irq is enabled when writing page with hwecc, but we actually do not wait for this irq done. Because NFI and ECC work in parallel, nfi irq and ecc irq almost come together. Now, there are two steps to check whether page data are totally written. First, wait for nfi irq INTR_AHB_DONE. This is to ensure all data in RAM are received by NFI. Second, polling the register NFI_ADDRCNTR till all data include ecc parity data runtime generated by ECC are sent to NAND device. So, it is redunant to enable ecc irq without waiting for it. Signed-off-by: Xiaolei Li Signed-off-by: Boris Brezillon --- drivers/mtd/nand/mtk_ecc.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/mtd/nand/mtk_ecc.c b/drivers/mtd/nand/mtk_ecc.c index a855a4e5cc35..00ce22e0eaf0 100644 --- a/drivers/mtd/nand/mtk_ecc.c +++ b/drivers/mtd/nand/mtk_ecc.c @@ -276,16 +276,18 @@ int mtk_ecc_enable(struct mtk_ecc *ecc, struct mtk_ecc_config *config) if (ret) return ret; - init_completion(&ecc->done); - reg_val = ECC_IRQ_EN; - /* - * For ECC_NFI_MODE, if ecc->caps->pg_irq_sel is 1, then it - * means this chip can only generate one ecc irq during page - * read / write. If is 0, generate one ecc irq each ecc step. - */ - if ((ecc->caps->pg_irq_sel) && (config->mode == ECC_NFI_MODE)) - reg_val |= ECC_PG_IRQ_SEL; - writew(reg_val, ecc->regs + ECC_IRQ_REG(op)); + if (config->mode != ECC_NFI_MODE || op != ECC_ENCODE) { + init_completion(&ecc->done); + reg_val = ECC_IRQ_EN; + /* + * For ECC_NFI_MODE, if ecc->caps->pg_irq_sel is 1, then it + * means this chip can only generate one ecc irq during page + * read / write. If is 0, generate one ecc irq each ecc step. + */ + if (ecc->caps->pg_irq_sel && config->mode == ECC_NFI_MODE) + reg_val |= ECC_PG_IRQ_SEL; + writew(reg_val, ecc->regs + ECC_IRQ_REG(op)); + } writew(ECC_OP_ENABLE, ecc->regs + ECC_CTL_REG(op)); -- 2.20.1