From 87cb12910a2ab6ed41ae951ea4d9c1cc1120199a Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Mon, 9 Jan 2017 13:22:15 +0100 Subject: [PATCH] ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available. AHCI provides the register PORTS_IMPL to let the software know which port is supported. The register must be initialized by the bootloader. However in some cases u-boot doesn't properly initialize this value (if it is not compiled with SATA support for example or if the SATA initialization fails). The DTS entry "ports-implemented" can be used to override the value in PORTS_IMPL. Without this patch the SATA will not work in the following two cases: * if there has been a failure to initialize SATA in u-boot. * if ahci_platform module has been removed and re-inserted. The reason is that the content of PORTS_IMPL is lost after the module is removed. I suspect that it's because the controller is reset by the hwmod. Cc: # v4.6+ Signed-off-by: Jean-Jacques Hiblot Acked-by: Roger Quadros [tony@atomide.com: updated comments with what goes wrong] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 1 + arch/arm/boot/dts/omap5.dtsi | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 1faf24acd521..5ba161679e01 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1378,6 +1378,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; rtc: rtc@48838000 { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 7cd92babc41a..0844737b72b2 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -988,6 +988,7 @@ phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; + ports-implemented = <0x1>; }; dss: dss@58000000 { -- 2.20.1