From 87c448c2f2dd734910617274637e726c82d0af25 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Sat, 19 Apr 2008 10:48:34 -0500 Subject: [PATCH] [PPC] Remove mpc885ads and mpc86x ads boards from arch/ppc We have a board port in arch/powerpc so we dont need this one anymore. Signed-off-by: Kumar Gala --- arch/ppc/8xx_io/enet.c | 23 - arch/ppc/Kconfig | 63 --- arch/ppc/configs/mpc86x_ads_defconfig | 633 -------------------------- arch/ppc/configs/mpc885ads_defconfig | 622 ------------------------- arch/ppc/platforms/Makefile | 2 - arch/ppc/platforms/fads.h | 25 - arch/ppc/platforms/mpc885ads.h | 93 ---- arch/ppc/platforms/mpc885ads_setup.c | 476 ------------------- arch/ppc/syslib/m8xx_setup.c | 10 - include/asm-ppc/mpc8xx.h | 4 - 10 files changed, 1951 deletions(-) delete mode 100644 arch/ppc/configs/mpc86x_ads_defconfig delete mode 100644 arch/ppc/configs/mpc885ads_defconfig delete mode 100644 arch/ppc/platforms/mpc885ads.h delete mode 100644 arch/ppc/platforms/mpc885ads_setup.c diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c index c6d047ae77a..5899aea1644 100644 --- a/arch/ppc/8xx_io/enet.c +++ b/arch/ppc/8xx_io/enet.c @@ -946,29 +946,6 @@ static int __init scc_enet_init(void) *((volatile uint *)BCSR1) &= ~BCSR1_ETHEN; #endif -#ifdef CONFIG_MPC885ADS - - /* Deassert PHY reset and enable the PHY. - */ - { - volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE); - uint tmp; - - tmp = in_be32(bcsr + 1 /* BCSR1 */); - tmp |= BCSR1_ETHEN; - out_be32(bcsr + 1, tmp); - tmp = in_be32(bcsr + 4 /* BCSR4 */); - tmp |= BCSR4_ETH10_RST; - out_be32(bcsr + 4, tmp); - iounmap(bcsr); - } - - /* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode - * upon reset. SCC is set to half duplex by default. So this - * inconsistency should be better fixed by the software. - */ -#endif - dev->base_addr = (unsigned long)ep; #if 0 dev->name = "CPM_ENET"; diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 3fc45e219ff..0f1863ed9c1 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -372,22 +372,6 @@ config MPC8XXFADS bool "FADS" select FADS -config MPC86XADS - bool "MPC86XADS" - help - MPC86x Application Development System by Freescale Semiconductor. - The MPC86xADS is meant to serve as a platform for s/w and h/w - development around the MPC86X processor families. - select FADS - -config MPC885ADS - bool "MPC885ADS" - help - Freescale Semiconductor MPC885 Application Development System (ADS). - Also known as DUET. - The MPC885ADS is meant to serve as a platform for s/w and h/w - development around the MPC885 processor family. - config TQM823L bool "TQM823L" help @@ -479,53 +463,6 @@ config WINCEPT endchoice -menu "Freescale Ethernet driver platform-specific options" - depends on FS_ENET - - config MPC8xx_SECOND_ETH - bool "Second Ethernet channel" - depends on (MPC885ADS || MPC86XADS) - default y - help - This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. - The latter will use SCC1, for 885ADS you can select it below. - - choice - prompt "Second Ethernet channel" - depends on MPC8xx_SECOND_ETH - default MPC8xx_SECOND_ETH_FEC2 - - config MPC8xx_SECOND_ETH_FEC2 - bool "FEC2" - depends on MPC885ADS - help - Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 - (often 2-nd UART) will not work if this is enabled. - - config MPC8xx_SECOND_ETH_SCC1 - bool "SCC1" - depends on MPC86XADS - select MPC8xx_SCC_ENET_FIXED - help - Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1 - (often 1-nd UART) will not work if this is enabled. - - config MPC8xx_SECOND_ETH_SCC3 - bool "SCC3" - depends on MPC885ADS - help - Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 - (often 1-nd UART) will not work if this is enabled. - - endchoice - - config MPC8xx_SCC_ENET_FIXED - depends on MPC8xx_SECOND_ETH_SCC - default n - bool "Use fixed MII-less mode for SCC Ethernet" - -endmenu - choice prompt "Machine Type" depends on 6xx diff --git a/arch/ppc/configs/mpc86x_ads_defconfig b/arch/ppc/configs/mpc86x_ads_defconfig deleted file mode 100644 index f63c6f59d68..00000000000 --- a/arch/ppc/configs/mpc86x_ads_defconfig +++ /dev/null @@ -1,633 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc4 -# Tue Jun 14 13:36:35 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -# CONFIG_BASE_FULL is not set -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -# CONFIG_SHMEM is not set -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -CONFIG_8xx=y -# CONFIG_E500 is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set -CONFIG_EMBEDDEDBOOT=y -# CONFIG_PM is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -CONFIG_FADS=y -# CONFIG_RPXLITE is not set -# CONFIG_RPXCLASSIC is not set -# CONFIG_BSEIP is not set -# CONFIG_MPC8XXFADS is not set -CONFIG_MPC86XADS=y -# CONFIG_TQM823L is not set -# CONFIG_TQM850L is not set -# CONFIG_TQM855L is not set -# CONFIG_TQM860L is not set -# CONFIG_FPS850L is not set -# CONFIG_SPD823TS is not set -# CONFIG_IVMS8 is not set -# CONFIG_IVML24 is not set -# CONFIG_SM850 is not set -# CONFIG_HERMES_PRO is not set -# CONFIG_IP860 is not set -# CONFIG_LWMON is not set -# CONFIG_PCU_E is not set -# CONFIG_CCM is not set -# CONFIG_LANTEC is not set -# CONFIG_MBX is not set -# CONFIG_WINCEPT is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_QSPAN is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -# CONFIG_STANDALONE is not set -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_OAKNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -# CONFIG_SERIAL_CPM_SMC2 is not set -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# MPC8xx CPM Options -# -CONFIG_SCC_ENET=y -CONFIG_SCC1_ENET=y -# CONFIG_SCC2_ENET is not set -# CONFIG_SCC3_ENET is not set -# CONFIG_FEC_ENET is not set -# CONFIG_ENET_BIG_BUFFERS is not set - -# -# Generic MPC8xx Options -# -# CONFIG_8xx_COPYBACK is not set -# CONFIG_8xx_CPU6 is not set -CONFIG_NO_UCODE_PATCH=y -# CONFIG_USB_SOF_UCODE_PATCH is not set -# CONFIG_I2C_SPI_UCODE_PATCH is not set -# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc885ads_defconfig b/arch/ppc/configs/mpc885ads_defconfig deleted file mode 100644 index 016f94d9325..00000000000 --- a/arch/ppc/configs/mpc885ads_defconfig +++ /dev/null @@ -1,622 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc6 -# Thu Jun 9 21:17:29 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -# CONFIG_CLEAN_COMPILE is not set -CONFIG_BROKEN=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -CONFIG_8xx=y -# CONFIG_E500 is not set -# CONFIG_MATH_EMULATION is not set -# CONFIG_CPU_FREQ is not set -CONFIG_EMBEDDEDBOOT=y -# CONFIG_PM is not set -CONFIG_NOT_COHERENT_CACHE=y - -# -# Platform options -# -# CONFIG_RPXLITE is not set -# CONFIG_RPXCLASSIC is not set -# CONFIG_BSEIP is not set -# CONFIG_FADS is not set -CONFIG_MPC885ADS=y -# CONFIG_TQM823L is not set -# CONFIG_TQM850L is not set -# CONFIG_TQM855L is not set -# CONFIG_TQM860L is not set -# CONFIG_FPS850L is not set -# CONFIG_SPD823TS is not set -# CONFIG_IVMS8 is not set -# CONFIG_IVML24 is not set -# CONFIG_SM850 is not set -# CONFIG_HERMES_PRO is not set -# CONFIG_IP860 is not set -# CONFIG_LWMON is not set -# CONFIG_PCU_E is not set -# CONFIG_CCM is not set -# CONFIG_LANTEC is not set -# CONFIG_MBX is not set -# CONFIG_WINCEPT is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_QSPAN is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_CONSISTENT_START=0xff100000 -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_OAKNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_PPP=y -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=y -CONFIG_PPP_SYNC_TTY=y -CONFIG_PPP_DEFLATE=y -# CONFIG_PPP_BSDCOMP is not set -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -CONFIG_SERIAL_CPM_SMC1=y -CONFIG_SERIAL_CPM_SMC2=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_EXT2_FS_POSIX_ACL is not set -# CONFIG_EXT2_FS_SECURITY is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# MPC8xx CPM Options -# -CONFIG_SCC_ENET=y -# CONFIG_SCC1_ENET is not set -# CONFIG_SCC2_ENET is not set -CONFIG_SCC3_ENET=y -# CONFIG_FEC_ENET is not set -# CONFIG_ENET_BIG_BUFFERS is not set - -# -# Generic MPC8xx Options -# -CONFIG_8xx_COPYBACK=y -CONFIG_8xx_CPU6=y -CONFIG_NO_UCODE_PATCH=y -# CONFIG_USB_SOF_UCODE_PATCH is not set -# CONFIG_I2C_SPI_UCODE_PATCH is not set -# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set - -# -# Library routines -# -CONFIG_CRC_CCITT=y -# CONFIG_CRC32 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/platforms/Makefile b/arch/ppc/platforms/Makefile index ef74a7b00f4..6260231987c 100644 --- a/arch/ppc/platforms/Makefile +++ b/arch/ppc/platforms/Makefile @@ -23,5 +23,3 @@ obj-$(CONFIG_SBC82xx) += sbc82xx.o obj-$(CONFIG_SPRUCE) += spruce.o obj-$(CONFIG_LITE5200) += lite5200.o obj-$(CONFIG_EV64360) += ev64360.o -obj-$(CONFIG_MPC86XADS) += mpc866ads_setup.o -obj-$(CONFIG_MPC885ADS) += mpc885ads_setup.o diff --git a/arch/ppc/platforms/fads.h b/arch/ppc/platforms/fads.h index 2f9f0f60e3f..5219366667b 100644 --- a/arch/ppc/platforms/fads.h +++ b/arch/ppc/platforms/fads.h @@ -22,29 +22,6 @@ #include -#if defined(CONFIG_MPC86XADS) - -#define BOARD_CHIP_NAME "MPC86X" - -/* U-Boot maps BCSR to 0xff080000 */ -#define BCSR_ADDR ((uint)0xff080000) - -/* MPC86XADS has one more CPLD and an additional BCSR. - */ -#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) -#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) - -#define BCSR5_T1_RST 0x10 -#define BCSR5_ATM155_RST 0x08 -#define BCSR5_ATM25_RST 0x04 -#define BCSR5_MII1_EN 0x02 -#define BCSR5_MII1_RST 0x01 - -/* There is no PHY link change interrupt */ -#define PHY_INTERRUPT (-1) - -#else /* FADS */ - /* Memory map is configured by the PROM startup. * I tried to follow the FADS manual, although the startup PROM * dictates this and we simply have to move some of the physical @@ -55,8 +32,6 @@ /* PHY link change interrupt */ #define PHY_INTERRUPT SIU_IRQ2 -#endif /* CONFIG_MPC86XADS */ - #define BCSR_SIZE ((uint)(64 * 1024)) #define BCSR0 ((uint)(BCSR_ADDR + 0x00)) #define BCSR1 ((uint)(BCSR_ADDR + 0x04)) diff --git a/arch/ppc/platforms/mpc885ads.h b/arch/ppc/platforms/mpc885ads.h deleted file mode 100644 index d3bbbb3c9a1..00000000000 --- a/arch/ppc/platforms/mpc885ads.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * A collection of structures, addresses, and values associated with - * the Freescale MPC885ADS board. - * Copied from the FADS stuff. - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_MPC885ADS_H__ -#define __ASM_MPC885ADS_H__ - - -#include - -/* U-Boot maps BCSR to 0xff080000 */ -#define BCSR_ADDR ((uint)0xff080000) -#define BCSR_SIZE ((uint)32) -#define BCSR0 ((uint)(BCSR_ADDR + 0x00)) -#define BCSR1 ((uint)(BCSR_ADDR + 0x04)) -#define BCSR2 ((uint)(BCSR_ADDR + 0x08)) -#define BCSR3 ((uint)(BCSR_ADDR + 0x0c)) -#define BCSR4 ((uint)(BCSR_ADDR + 0x10)) - -#define CFG_PHYDEV_ADDR ((uint)0xff0a0000) -#define BCSR5 ((uint)(CFG_PHYDEV_ADDR + 0x300)) - -#define IMAP_ADDR ((uint)0xff000000) -#define IMAP_SIZE ((uint)(64 * 1024)) - -#define PCMCIA_MEM_ADDR ((uint)0xff020000) -#define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) - -/* Bits of interest in the BCSRs. - */ -#define BCSR1_ETHEN ((uint)0x20000000) -#define BCSR1_IRDAEN ((uint)0x10000000) -#define BCSR1_RS232EN_1 ((uint)0x01000000) -#define BCSR1_PCCEN ((uint)0x00800000) -#define BCSR1_PCCVCC0 ((uint)0x00400000) -#define BCSR1_PCCVPP0 ((uint)0x00200000) -#define BCSR1_PCCVPP1 ((uint)0x00100000) -#define BCSR1_PCCVPP_MASK (BCSR1_PCCVPP0 | BCSR1_PCCVPP1) -#define BCSR1_RS232EN_2 ((uint)0x00040000) -#define BCSR1_PCCVCC1 ((uint)0x00010000) -#define BCSR1_PCCVCC_MASK (BCSR1_PCCVCC0 | BCSR1_PCCVCC1) - -#define BCSR4_ETH10_RST ((uint)0x80000000) /* 10Base-T PHY reset*/ -#define BCSR4_USB_LO_SPD ((uint)0x04000000) -#define BCSR4_USB_VCC ((uint)0x02000000) -#define BCSR4_USB_FULL_SPD ((uint)0x00040000) -#define BCSR4_USB_EN ((uint)0x00020000) - -#define BCSR5_MII2_EN 0x40 -#define BCSR5_MII2_RST 0x20 -#define BCSR5_T1_RST 0x10 -#define BCSR5_ATM155_RST 0x08 -#define BCSR5_ATM25_RST 0x04 -#define BCSR5_MII1_EN 0x02 -#define BCSR5_MII1_RST 0x01 - -/* Interrupt level assignments */ -#define PHY_INTERRUPT SIU_IRQ7 /* PHY link change interrupt */ -#define SIU_INT_FEC1 SIU_LEVEL1 /* FEC1 interrupt */ -#define SIU_INT_FEC2 SIU_LEVEL3 /* FEC2 interrupt */ -#define FEC_INTERRUPT SIU_INT_FEC1 /* FEC interrupt */ - -/* We don't use the 8259 */ -#define NR_8259_INTS 0 - -/* CPM Ethernet through SCC3 */ -#define PA_ENET_RXD ((ushort)0x0040) -#define PA_ENET_TXD ((ushort)0x0080) -#define PE_ENET_TCLK ((uint)0x00004000) -#define PE_ENET_RCLK ((uint)0x00008000) -#define PE_ENET_TENA ((uint)0x00000010) -#define PC_ENET_CLSN ((ushort)0x0400) -#define PC_ENET_RENA ((ushort)0x0800) - -/* Control bits in the SICR to route TCLK (CLK5) and RCLK (CLK6) to - * SCC3. Also, make sure GR3 (bit 8) and SC3 (bit 9) are zero */ -#define SICR_ENET_MASK ((uint)0x00ff0000) -#define SICR_ENET_CLKRT ((uint)0x002c0000) - -#define BOARD_CHIP_NAME "MPC885" - -#endif /* __ASM_MPC885ADS_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c deleted file mode 100644 index ba06cc08cda..00000000000 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ /dev/null @@ -1,476 +0,0 @@ -/*arch/ppc/platforms/mpc885ads_setup.c - * - * Platform setup for the Freescale mpc885ads board - * - * Vitaly Bordug - * - * Copyright 2005 MontaVista Software Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern unsigned char __res[]; -static void setup_smc1_ioports(struct fs_uart_platform_info*); -static void setup_smc2_ioports(struct fs_uart_platform_info*); - -static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata; -static void setup_fec1_ioports(struct fs_platform_info*); -static void setup_fec2_ioports(struct fs_platform_info*); -static void setup_scc3_ioports(struct fs_platform_info*); - -static struct fs_uart_platform_info mpc885_uart_pdata[] = { - [fsid_smc1_uart] = { - .brg = 1, - .fs_no = fsid_smc1_uart, - .init_ioports = setup_smc1_ioports, - .tx_num_fifo = 4, - .tx_buf_size = 32, - .rx_num_fifo = 4, - .rx_buf_size = 32, - }, - [fsid_smc2_uart] = { - .brg = 2, - .fs_no = fsid_smc2_uart, - .init_ioports = setup_smc2_ioports, - .tx_num_fifo = 4, - .tx_buf_size = 32, - .rx_num_fifo = 4, - .rx_buf_size = 32, - }, -}; - -static struct fs_platform_info mpc8xx_enet_pdata[] = { - [fsid_fec1] = { - .rx_ring = 128, - .tx_ring = 16, - .rx_copybreak = 240, - - .use_napi = 1, - .napi_weight = 17, - - .init_ioports = setup_fec1_ioports, - - .bus_id = "0:00", - .has_phy = 1, - }, - [fsid_fec2] = { - .rx_ring = 128, - .tx_ring = 16, - .rx_copybreak = 240, - - .use_napi = 1, - .napi_weight = 17, - - .init_ioports = setup_fec2_ioports, - - .bus_id = "0:01", - .has_phy = 1, - }, - [fsid_scc3] = { - .rx_ring = 64, - .tx_ring = 8, - .rx_copybreak = 240, - - .use_napi = 1, - .napi_weight = 17, - - .init_ioports = setup_scc3_ioports, -#ifdef CONFIG_FIXED_MII_10_FDX - .bus_id = "fixed@100:1", -#else - .bus_id = "0:02", - #endif - }, -}; - -void __init board_init(void) -{ - cpm8xx_t *cp = cpmp; - unsigned int *bcsr_io; - -#ifdef CONFIG_FS_ENET - immap_t *immap = (immap_t *) IMAP_ADDR; -#endif - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR\n"); - return; - } -#ifdef CONFIG_SERIAL_CPM_SMC1 - cp->cp_simode &= ~(0xe0000000 >> 17); /* brg1 */ - clrbits32(bcsr_io, BCSR1_RS232EN_1); - cp->cp_smc[0].smc_smcm |= (SMCM_RX | SMCM_TX); - cp->cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); -#else - setbits32(bcsr_io,BCSR1_RS232EN_1); - cp->cp_smc[0].smc_smcmr = 0; - cp->cp_smc[0].smc_smce = 0; -#endif - -#ifdef CONFIG_SERIAL_CPM_SMC2 - cp->cp_simode &= ~(0xe0000000 >> 1); - cp->cp_simode |= (0x20000000 >> 1); /* brg2 */ - clrbits32(bcsr_io,BCSR1_RS232EN_2); - cp->cp_smc[1].smc_smcm |= (SMCM_RX | SMCM_TX); - cp->cp_smc[1].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); -#else - setbits32(bcsr_io,BCSR1_RS232EN_2); - cp->cp_smc[1].smc_smcmr = 0; - cp->cp_smc[1].smc_smce = 0; -#endif - iounmap(bcsr_io); - -#ifdef CONFIG_FS_ENET - /* use MDC for MII (common) */ - setbits16(&immap->im_ioport.iop_pdpar, 0x0080); - clrbits16(&immap->im_ioport.iop_pddir, 0x0080); - bcsr_io = ioremap(BCSR5, sizeof(unsigned long)); - clrbits32(bcsr_io,BCSR5_MII1_EN); - clrbits32(bcsr_io,BCSR5_MII1_RST); -#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 - clrbits32(bcsr_io,BCSR5_MII2_EN); - clrbits32(bcsr_io,BCSR5_MII2_RST); -#endif - iounmap(bcsr_io); -#endif -} - -static void setup_fec1_ioports(struct fs_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - - /* configure FEC1 pins */ - setbits16(&immap->im_ioport.iop_papar, 0xf830); - setbits16(&immap->im_ioport.iop_padir, 0x0830); - clrbits16(&immap->im_ioport.iop_padir, 0xf000); - setbits32(&immap->im_cpm.cp_pbpar, 0x00001001); - - clrbits32(&immap->im_cpm.cp_pbdir, 0x00001001); - setbits16(&immap->im_ioport.iop_pcpar, 0x000c); - clrbits16(&immap->im_ioport.iop_pcdir, 0x000c); - setbits32(&immap->im_cpm.cp_pepar, 0x00000003); - - setbits32(&immap->im_cpm.cp_pedir, 0x00000003); - clrbits32(&immap->im_cpm.cp_peso, 0x00000003); - clrbits32(&immap->im_cpm.cp_cptr, 0x00000100); -} - -static void setup_fec2_ioports(struct fs_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - - /* configure FEC2 pins */ - setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc); - setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc); - clrbits32(&immap->im_cpm.cp_peso, 0x000087fc); - setbits32(&immap->im_cpm.cp_peso, 0x00037800); - clrbits32(&immap->im_cpm.cp_cptr, 0x00000080); -} - -static void setup_scc3_ioports(struct fs_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - unsigned *bcsr_io; - - bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR\n"); - return; - } - - /* Enable the PHY. - */ - clrbits32(bcsr_io+4, BCSR4_ETH10_RST); - udelay(1000); - setbits32(bcsr_io+4, BCSR4_ETH10_RST); - /* Configure port A pins for Txd and Rxd. - */ - setbits16(&immap->im_ioport.iop_papar, PA_ENET_RXD | PA_ENET_TXD); - clrbits16(&immap->im_ioport.iop_padir, PA_ENET_RXD | PA_ENET_TXD); - - /* Configure port C pins to enable CLSN and RENA. - */ - clrbits16(&immap->im_ioport.iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA); - clrbits16(&immap->im_ioport.iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA); - setbits16(&immap->im_ioport.iop_pcso, PC_ENET_CLSN | PC_ENET_RENA); - - /* Configure port E for TCLK and RCLK. - */ - setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TCLK | PE_ENET_RCLK); - clrbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); - clrbits32(&immap->im_cpm.cp_pedir, - PE_ENET_TCLK | PE_ENET_RCLK | PE_ENET_TENA); - clrbits32(&immap->im_cpm.cp_peso, PE_ENET_TCLK | PE_ENET_RCLK); - setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); - - /* Configure Serial Interface clock routing. - * First, clear all SCC bits to zero, then set the ones we want. - */ - clrbits32(&immap->im_cpm.cp_sicr, SICR_ENET_MASK); - setbits32(&immap->im_cpm.cp_sicr, SICR_ENET_CLKRT); - - /* Disable Rx and Tx. SMC1 sshould be stopped if SCC3 eternet are used. - */ - immap->im_cpm.cp_smc[0].smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - /* On the MPC885ADS SCC ethernet PHY is initialized in the full duplex mode - * by H/W setting after reset. SCC ethernet controller support only half duplex. - * This discrepancy of modes causes a lot of carrier lost errors. - */ - - /* In the original SCC enet driver the following code is placed at - the end of the initialization */ - setbits32(&immap->im_cpm.cp_pepar, PE_ENET_TENA); - clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA); - setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA); - - setbits32(bcsr_io+4, BCSR1_ETHEN); - iounmap(bcsr_io); -} - -static int mac_count = 0; - -static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) -{ - struct fs_platform_info *fpi; - bd_t *bd = (bd_t *) __res; - char *e; - int i; - - if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) { - printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); - return; - } - - fpi = &mpc8xx_enet_pdata[fs_no]; - - switch (fs_no) { - case fsid_fec1: - fpi->init_ioports = &setup_fec1_ioports; - break; - case fsid_fec2: - fpi->init_ioports = &setup_fec2_ioports; - break; - case fsid_scc3: - fpi->init_ioports = &setup_scc3_ioports; - break; - default: - printk(KERN_WARNING "Device %s is not supported!\n", pdev->name); - return; - } - - pdev->dev.platform_data = fpi; - fpi->fs_no = fs_no; - - e = (unsigned char *)&bd->bi_enetaddr; - for (i = 0; i < 6; i++) - fpi->macaddr[i] = *e++; - - fpi->macaddr[5] += mac_count++; - -} - -static void mpc885ads_fixup_fec_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for FEC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec"))) - return; - mpc885ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1); -} - -static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev, - int idx) -{ - /* This is for SCC devices only */ - if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc"))) - return; - - mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1); -} - -static void setup_smc1_ioports(struct fs_uart_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - unsigned *bcsr_io; - unsigned int iobits = 0x000000c0; - - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_1); - iounmap(bcsr_io); - - setbits32(&immap->im_cpm.cp_pbpar, iobits); - clrbits32(&immap->im_cpm.cp_pbdir, iobits); - clrbits16(&immap->im_cpm.cp_pbodr, iobits); -} - -static void setup_smc2_ioports(struct fs_uart_platform_info* pdata) -{ - immap_t *immap = (immap_t *) IMAP_ADDR; - unsigned *bcsr_io; - unsigned int iobits = 0x00000c00; - - bcsr_io = ioremap(BCSR1, sizeof(unsigned long)); - - if (bcsr_io == NULL) { - printk(KERN_CRIT "Could not remap BCSR1\n"); - return; - } - clrbits32(bcsr_io,BCSR1_RS232EN_2); - iounmap(bcsr_io); - -#ifndef CONFIG_SERIAL_CPM_ALT_SMC2 - setbits32(&immap->im_cpm.cp_pbpar, iobits); - clrbits32(&immap->im_cpm.cp_pbdir, iobits); - clrbits16(&immap->im_cpm.cp_pbodr, iobits); -#else - setbits16(&immap->im_ioport.iop_papar, iobits); - clrbits16(&immap->im_ioport.iop_padir, iobits); - clrbits16(&immap->im_ioport.iop_paodr, iobits); -#endif -} - -static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev, - int idx) -{ - bd_t *bd = (bd_t *) __res; - struct fs_uart_platform_info *pinfo; - int num = ARRAY_SIZE(mpc885_uart_pdata); - - int id = fs_uart_id_smc2fsid(idx); - - /* no need to alter anything if console */ - if ((id < num) && (!pdev->dev.platform_data)) { - pinfo = &mpc885_uart_pdata[id]; - pinfo->uart_clk = bd->bi_intfreq; - pdev->dev.platform_data = pinfo; - } -} - - -static int mpc885ads_platform_notify(struct device *dev) -{ - - static const struct platform_notify_dev_map dev_map[] = { - { - .bus_id = "fsl-cpm-fec", - .rtn = mpc885ads_fixup_fec_enet_pdata, - }, - { - .bus_id = "fsl-cpm-scc", - .rtn = mpc885ads_fixup_scc_enet_pdata, - }, - { - .bus_id = "fsl-cpm-smc:uart", - .rtn = mpc885ads_fixup_uart_pdata - }, - { - .bus_id = NULL - } - }; - - platform_notify_map(dev_map,dev); - - return 0; -} - -int __init mpc885ads_init(void) -{ - struct fs_mii_fec_platform_info* fmpi; - bd_t *bd = (bd_t *) __res; - - printk(KERN_NOTICE "mpc885ads: Init\n"); - - platform_notify = mpc885ads_platform_notify; - - ppc_sys_device_initfunc(); - ppc_sys_device_disable_all(); - - ppc_sys_device_enable(MPC8xx_CPM_FEC1); - - ppc_sys_device_enable(MPC8xx_MDIO_FEC); - fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data = - &mpc8xx_mdio_fec_pdata; - - fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1; - - /* No PHY interrupt line here */ - fmpi->irq[0xf] = SIU_IRQ7; - -#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 - ppc_sys_device_enable(MPC8xx_CPM_SCC3); - -#endif -#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2 - ppc_sys_device_enable(MPC8xx_CPM_FEC2); -#endif - -#ifdef CONFIG_SERIAL_CPM_SMC1 - ppc_sys_device_enable(MPC8xx_CPM_SMC1); - ppc_sys_device_setfunc(MPC8xx_CPM_SMC1, PPC_SYS_FUNC_UART); -#endif - -#ifdef CONFIG_SERIAL_CPM_SMC2 - ppc_sys_device_enable(MPC8xx_CPM_SMC2); - ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART); -#endif - return 0; -} - -arch_initcall(mpc885ads_init); - -/* - To prevent confusion, console selection is gross: - by 0 assumed SMC1 and by 1 assumed SMC2 - */ -struct platform_device* early_uart_get_pdev(int index) -{ - bd_t *bd = (bd_t *) __res; - struct fs_uart_platform_info *pinfo; - - struct platform_device* pdev = NULL; - if(index) { /*assume SMC2 here*/ - pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC2]; - pinfo = &mpc885_uart_pdata[1]; - } else { /*over SMC1*/ - pdev = &ppc_sys_platform_devices[MPC8xx_CPM_SMC1]; - pinfo = &mpc885_uart_pdata[0]; - } - - pinfo->uart_clk = bd->bi_intfreq; - pdev->dev.platform_data = pinfo; - ppc_sys_fixup_mem_resource(pdev, IMAP_ADDR); - return NULL; -} - diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 9caf850c9b3..dcd08d4a7f1 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -141,16 +141,6 @@ m8xx_setup_arch(void) } } #endif -#endif - -#if defined (CONFIG_MPC86XADS) || defined (CONFIG_MPC885ADS) -#if defined(CONFIG_MTD_PHYSMAP) - physmap_configure(binfo->bi_flashstart, binfo->bi_flashsize, - MPC8xxADS_BANK_WIDTH, NULL); -#ifdef CONFIG_MTD_PARTITIONS - physmap_set_partitions(mpc8xxads_partitions, mpc8xxads_part_num); -#endif /* CONFIG_MTD_PARTITIONS */ -#endif /* CONFIG_MTD_PHYSMAP */ #endif board_init(); diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h index d3a2f2fe230..b9e3060b027 100644 --- a/include/asm-ppc/mpc8xx.h +++ b/include/asm-ppc/mpc8xx.h @@ -63,10 +63,6 @@ #include #endif -#if defined(CONFIG_MPC885ADS) -#include -#endif - /* Currently, all 8xx boards that support a processor to PCI/ISA bridge * use the same memory map. */ -- 2.20.1