From 87b59ff8d1d9d809c014a4e20bc043064b6e0047 Mon Sep 17 00:00:00 2001 From: Brendan Higgins Date: Fri, 28 Jul 2017 13:45:58 -0700 Subject: [PATCH] i2c: aspeed: add proper support fo 24xx clock params 24xx BMCs have larger clock divider granularity which can cause problems when trying to set them as 25xx clock dividers; this adds clock setting code specific to 24xx. This also fixes a potential issue where clock dividers were rounded down instead of up. Signed-off-by: Brendan Higgins Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-aspeed.c | 74 +++++++++++++++++++++++++-------- 1 file changed, 56 insertions(+), 18 deletions(-) diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index f19348328a71..60afab866494 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -132,6 +132,7 @@ struct aspeed_i2c_bus { /* Synchronizes I/O mem access to base. */ spinlock_t lock; struct completion cmd_complete; + u32 (*get_clk_reg_val)(u32 divisor); unsigned long parent_clk_frequency; u32 bus_frequency; /* Transaction state. */ @@ -674,7 +675,7 @@ static const struct i2c_algorithm aspeed_i2c_algo = { #endif /* CONFIG_I2C_SLAVE */ }; -static u32 aspeed_i2c_get_clk_reg_val(u32 divisor) +static u32 aspeed_i2c_get_clk_reg_val(u32 clk_high_low_max, u32 divisor) { u32 base_clk, clk_high, clk_low, tmp; @@ -694,16 +695,22 @@ static u32 aspeed_i2c_get_clk_reg_val(u32 divisor) * Thus, * SCL_freq = APB_freq / * ((1 << base_clk) * (clk_high + 1 + clk_low + 1)) - * The documentation recommends clk_high >= 8 and clk_low >= 7 when - * possible; this last constraint gives us the following solution: + * The documentation recommends clk_high >= clk_high_max / 2 and + * clk_low >= clk_low_max / 2 - 1 when possible; this last constraint + * gives us the following solution: */ - base_clk = divisor > 33 ? ilog2((divisor - 1) / 32) + 1 : 0; - tmp = divisor / (1 << base_clk); - clk_high = tmp / 2 + tmp % 2; - clk_low = tmp - clk_high; + base_clk = divisor > clk_high_low_max ? + ilog2((divisor - 1) / clk_high_low_max) + 1 : 0; + tmp = (divisor + (1 << base_clk) - 1) >> base_clk; + clk_low = tmp / 2; + clk_high = tmp - clk_low; + + if (clk_high) + clk_high--; + + if (clk_low) + clk_low--; - clk_high -= 1; - clk_low -= 1; return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT) & ASPEED_I2CD_TIME_SCL_HIGH_MASK) @@ -712,13 +719,31 @@ static u32 aspeed_i2c_get_clk_reg_val(u32 divisor) | (base_clk & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK); } +static u32 aspeed_i2c_24xx_get_clk_reg_val(u32 divisor) +{ + /* + * clk_high and clk_low are each 3 bits wide, so each can hold a max + * value of 8 giving a clk_high_low_max of 16. + */ + return aspeed_i2c_get_clk_reg_val(16, divisor); +} + +static u32 aspeed_i2c_25xx_get_clk_reg_val(u32 divisor) +{ + /* + * clk_high and clk_low are each 4 bits wide, so each can hold a max + * value of 16 giving a clk_high_low_max of 32. + */ + return aspeed_i2c_get_clk_reg_val(32, divisor); +} + /* precondition: bus.lock has been acquired. */ static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus) { u32 divisor, clk_reg_val; - divisor = bus->parent_clk_frequency / bus->bus_frequency; - clk_reg_val = aspeed_i2c_get_clk_reg_val(divisor); + divisor = DIV_ROUND_UP(bus->parent_clk_frequency, bus->bus_frequency); + clk_reg_val = bus->get_clk_reg_val(divisor); writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1); writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2); @@ -777,8 +802,22 @@ static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus) return ret; } +static const struct of_device_id aspeed_i2c_bus_of_table[] = { + { + .compatible = "aspeed,ast2400-i2c-bus", + .data = aspeed_i2c_24xx_get_clk_reg_val, + }, + { + .compatible = "aspeed,ast2500-i2c-bus", + .data = aspeed_i2c_25xx_get_clk_reg_val, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table); + static int aspeed_i2c_probe_bus(struct platform_device *pdev) { + const struct of_device_id *match; struct aspeed_i2c_bus *bus; struct clk *parent_clk; struct resource *res; @@ -808,6 +847,12 @@ static int aspeed_i2c_probe_bus(struct platform_device *pdev) bus->bus_frequency = 100000; } + match = of_match_node(aspeed_i2c_bus_of_table, pdev->dev.of_node); + if (!match) + bus->get_clk_reg_val = aspeed_i2c_24xx_get_clk_reg_val; + else + bus->get_clk_reg_val = match->data; + /* Initialize the I2C adapter */ spin_lock_init(&bus->lock); init_completion(&bus->cmd_complete); @@ -869,13 +914,6 @@ static int aspeed_i2c_remove_bus(struct platform_device *pdev) return 0; } -static const struct of_device_id aspeed_i2c_bus_of_table[] = { - { .compatible = "aspeed,ast2400-i2c-bus", }, - { .compatible = "aspeed,ast2500-i2c-bus", }, - { }, -}; -MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table); - static struct platform_driver aspeed_i2c_bus_driver = { .probe = aspeed_i2c_probe_bus, .remove = aspeed_i2c_remove_bus, -- 2.20.1