From 87a507459f49862772127acf051609b37363dd16 Mon Sep 17 00:00:00 2001 From: Vincent Yang Date: Tue, 20 Jan 2015 16:05:18 +0800 Subject: [PATCH] mmc: sdhci: host: add new f_sdh30 This patch adds new host controller driver for Fujitsu SDHCI controller f_sdh30. Signed-off-by: Vincent Yang Signed-off-by: Andy Green Signed-off-by: Tetsuya Takinishi Signed-off-by: Ulf Hansson --- .../devicetree/bindings/mmc/sdhci-fujitsu.txt | 30 +++ drivers/mmc/host/Kconfig | 11 + drivers/mmc/host/Makefile | 1 + drivers/mmc/host/sdhci_f_sdh30.c | 237 ++++++++++++++++++ 4 files changed, 279 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt create mode 100644 drivers/mmc/host/sdhci_f_sdh30.c diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt new file mode 100644 index 000000000000..de2c53cff4f1 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt @@ -0,0 +1,30 @@ +* Fujitsu SDHCI controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci_f_sdh30 driver. + +Required properties: +- compatible: "fujitsu,mb86s70-sdhci-3.0" +- clocks: Must contain an entry for each entry in clock-names. It is a + list of phandles and clock-specifier pairs. + See ../clocks/clock-bindings.txt for details. +- clock-names: Should contain the following two entries: + "iface" - clock used for sdhci interface + "core" - core clock for sdhci controller + +Optional properties: +- vqmmc-supply: phandle to the regulator device tree node, mentioned + as the VCCQ/VDD_IO supply in the eMMC/SD specs. + +Example: + + sdhci1: mmc@36600000 { + compatible = "fujitsu,mb86s70-sdhci-3.0"; + reg = <0 0x36600000 0x1000>; + interrupts = <0 172 0x4>, + <0 173 0x4>; + bus-width = <4>; + vqmmc-supply = <&vccq_sdhci1>; + clocks = <&clock 2 2 0>, <&clock 2 3 0>; + clock-names = "iface", "core"; + }; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 2d6fbdd11803..85df91f55b63 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -292,6 +292,17 @@ config MMC_SDHCI_BCM2835 If unsure, say N. +config MMC_SDHCI_F_SDH30 + tristate "SDHCI support for Fujitsu Semiconductor F_SDH30" + depends on MMC_SDHCI_PLTFM + depends on OF + help + This selects the Secure Digital Host Controller Interface (SDHCI) + Needed by some Fujitsu SoC for MMC / SD / SDIO support. + If you have a controller with this interface, say Y or M here. + + If unsure, say N. + config MMC_MOXART tristate "MOXART SD/MMC Host Controller support" depends on ARCH_MOXART && MMC diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index f7b0a77cf419..6a7cfe0de332 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_MMC_SDHCI_PXAV3) += sdhci-pxav3.o obj-$(CONFIG_MMC_SDHCI_PXAV2) += sdhci-pxav2.o obj-$(CONFIG_MMC_SDHCI_S3C) += sdhci-s3c.o obj-$(CONFIG_MMC_SDHCI_SIRF) += sdhci-sirf.o +obj-$(CONFIG_MMC_SDHCI_F_SDH30) += sdhci_f_sdh30.o obj-$(CONFIG_MMC_SDHCI_SPEAR) += sdhci-spear.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c new file mode 100644 index 000000000000..c1bb156445e4 --- /dev/null +++ b/drivers/mmc/host/sdhci_f_sdh30.c @@ -0,0 +1,237 @@ +/* + * linux/drivers/mmc/host/sdhci_f_sdh30.c + * + * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd + * Vincent Yang + * Copyright (C) 2015 Linaro Ltd Andy Green + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2 of the License. + */ + +#include +#include +#include +#include + +#include "sdhci-pltfm.h" + +/* F_SDH30 extended Controller registers */ +#define F_SDH30_AHB_CONFIG 0x100 +#define F_SDH30_AHB_BIGED 0x00000040 +#define F_SDH30_BUSLOCK_DMA 0x00000020 +#define F_SDH30_BUSLOCK_EN 0x00000010 +#define F_SDH30_SIN 0x00000008 +#define F_SDH30_AHB_INCR_16 0x00000004 +#define F_SDH30_AHB_INCR_8 0x00000002 +#define F_SDH30_AHB_INCR_4 0x00000001 + +#define F_SDH30_TUNING_SETTING 0x108 +#define F_SDH30_CMD_CHK_DIS 0x00010000 + +#define F_SDH30_IO_CONTROL2 0x114 +#define F_SDH30_CRES_O_DN 0x00080000 +#define F_SDH30_MSEL_O_1_8 0x00040000 + +#define F_SDH30_ESD_CONTROL 0x124 +#define F_SDH30_EMMC_RST 0x00000002 +#define F_SDH30_EMMC_HS200 0x01000000 + +#define F_SDH30_CMD_DAT_DELAY 0x200 + +#define F_SDH30_MIN_CLOCK 400000 + +struct f_sdhost_priv { + struct clk *clk_iface; + struct clk *clk; + u32 vendor_hs200; + struct device *dev; +}; + +void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host) +{ + struct f_sdhost_priv *priv = sdhci_priv(host); + u32 ctrl = 0; + + usleep_range(2500, 3000); + ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2); + ctrl |= F_SDH30_CRES_O_DN; + sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); + ctrl |= F_SDH30_MSEL_O_1_8; + sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); + + ctrl &= ~F_SDH30_CRES_O_DN; + sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); + usleep_range(2500, 3000); + + if (priv->vendor_hs200) { + dev_info(priv->dev, "%s: setting hs200\n", __func__); + ctrl = sdhci_readl(host, F_SDH30_ESD_CONTROL); + ctrl |= priv->vendor_hs200; + sdhci_writel(host, ctrl, F_SDH30_ESD_CONTROL); + } + + ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING); + ctrl |= F_SDH30_CMD_CHK_DIS; + sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING); +} + +unsigned int sdhci_f_sdh30_get_min_clock(struct sdhci_host *host) +{ + return F_SDH30_MIN_CLOCK; +} + +void sdhci_f_sdh30_reset(struct sdhci_host *host, u8 mask) +{ + if (sdhci_readw(host, SDHCI_CLOCK_CONTROL) == 0) + sdhci_writew(host, 0xBC01, SDHCI_CLOCK_CONTROL); + + sdhci_reset(host, mask); +} + +static const struct sdhci_ops sdhci_f_sdh30_ops = { + .voltage_switch = sdhci_f_sdh30_soft_voltage_switch, + .get_min_clock = sdhci_f_sdh30_get_min_clock, + .reset = sdhci_f_sdh30_reset, + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +static int sdhci_f_sdh30_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct device *dev = &pdev->dev; + struct resource *res; + int irq, ctrl = 0, ret = 0; + struct f_sdhost_priv *priv; + u32 reg = 0; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "%s: no irq specified\n", __func__); + return irq; + } + + host = sdhci_alloc_host(dev, sizeof(struct sdhci_host) + + sizeof(struct f_sdhost_priv)); + if (IS_ERR(host)) + return PTR_ERR(host); + + priv = sdhci_priv(host); + priv->dev = dev; + + host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | + SDHCI_QUIRK_INVERTED_WRITE_PROTECT; + host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE | + SDHCI_QUIRK2_TUNING_WORK_AROUND; + + ret = mmc_of_parse(host->mmc); + if (ret) + goto err; + + platform_set_drvdata(pdev, host); + + sdhci_get_of_property(pdev); + host->hw_name = "f_sdh30"; + host->ops = &sdhci_f_sdh30_ops; + host->irq = irq; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + host->ioaddr = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(host->ioaddr)) { + ret = PTR_ERR(host); + goto err; + } + + priv->clk_iface = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(priv->clk_iface)) { + ret = PTR_ERR(priv->clk_iface); + goto err; + } + + ret = clk_prepare_enable(priv->clk_iface); + if (ret) + goto err; + + priv->clk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(priv->clk)) { + ret = PTR_ERR(priv->clk); + goto err_clk; + } + + ret = clk_prepare_enable(priv->clk); + if (ret) + goto err_clk; + + /* init vendor specific regs */ + ctrl = sdhci_readw(host, F_SDH30_AHB_CONFIG); + ctrl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 | + F_SDH30_AHB_INCR_4; + ctrl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN); + sdhci_writew(host, ctrl, F_SDH30_AHB_CONFIG); + + reg = sdhci_readl(host, F_SDH30_ESD_CONTROL); + sdhci_writel(host, reg & ~F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL); + msleep(20); + sdhci_writel(host, reg | F_SDH30_EMMC_RST, F_SDH30_ESD_CONTROL); + + reg = sdhci_readl(host, SDHCI_CAPABILITIES); + if (reg & SDHCI_CAN_DO_8BIT) + priv->vendor_hs200 = F_SDH30_EMMC_HS200; + + ret = sdhci_add_host(host); + if (ret) + goto err_add_host; + + return 0; + +err_add_host: + clk_disable_unprepare(priv->clk); +err_clk: + clk_disable_unprepare(priv->clk_iface); +err: + sdhci_free_host(host); + return ret; +} + +static int sdhci_f_sdh30_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct f_sdhost_priv *priv = sdhci_priv(host); + + sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) == + 0xffffffff); + + clk_disable_unprepare(priv->clk_iface); + clk_disable_unprepare(priv->clk); + + sdhci_free_host(host); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id f_sdh30_dt_ids[] = { + { .compatible = "fujitsu,mb86s70-sdhci-3.0" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, f_sdh30_dt_ids); + +static struct platform_driver sdhci_f_sdh30_driver = { + .driver = { + .name = "f_sdh30", + .of_match_table = f_sdh30_dt_ids, + .pm = SDHCI_PLTFM_PMOPS, + }, + .probe = sdhci_f_sdh30_probe, + .remove = sdhci_f_sdh30_remove, +}; + +module_platform_driver(sdhci_f_sdh30_driver); + +MODULE_DESCRIPTION("F_SDH30 SD Card Controller driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("FUJITSU SEMICONDUCTOR LTD."); +MODULE_ALIAS("platform:f_sdh30"); -- 2.20.1