From 868d5309942927dc86f57009420c5d366ec05daa Mon Sep 17 00:00:00 2001 From: Mallikarjuna R Chilakala Date: Tue, 4 Oct 2005 06:58:59 -0400 Subject: [PATCH] e1000: Support for 82571 and 82572 controllers Signed-off-by: Mallikarjuna R Chilakala Signed-off-by: Ganesh Venkatesan Signed-off-by: John Ronciak Signed-off-by: Jeff Garzik --- drivers/net/e1000/e1000_ethtool.c | 9 +- drivers/net/e1000/e1000_hw.c | 219 +++++++++++++++++++++++++----- drivers/net/e1000/e1000_hw.h | 96 +++++++++++-- drivers/net/e1000/e1000_main.c | 102 ++++++++++++-- 4 files changed, 372 insertions(+), 54 deletions(-) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 8f3a13420278..5f9a36bb77f5 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -696,6 +696,11 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) * Some bits that get toggled are ignored. */ switch (adapter->hw.mac_type) { + /* there are several bits on newer hardware that are r/w */ + case e1000_82571: + case e1000_82572: + toggle = 0x7FFFF3FF; + break; case e1000_82573: toggle = 0x7FFFF033; break; @@ -1245,6 +1250,8 @@ e1000_set_phy_loopback(struct e1000_adapter *adapter) case e1000_82541_rev_2: case e1000_82547: case e1000_82547_rev_2: + case e1000_82571: + case e1000_82572: case e1000_82573: return e1000_integrated_phy_loopback(adapter); break; @@ -1625,7 +1632,7 @@ e1000_phys_id(struct net_device *netdev, uint32_t data) if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ)) data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ); - if(adapter->hw.mac_type < e1000_82573) { + if(adapter->hw.mac_type < e1000_82571) { if(!adapter->blink_timer.function) { init_timer(&adapter->blink_timer); adapter->blink_timer.function = e1000_led_blink_callback; diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 045f5426ab9a..7d627dd89a3d 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -83,14 +83,14 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = static const uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = - { 8, 13, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, - 22, 24, 27, 30, 32, 35, 37, 40, 42, 44, 47, 49, 51, 54, 56, 58, - 32, 35, 38, 41, 44, 47, 50, 53, 55, 58, 61, 63, 66, 69, 71, 74, - 43, 47, 51, 54, 58, 61, 64, 67, 71, 74, 77, 80, 82, 85, 88, 90, - 57, 62, 66, 70, 74, 77, 81, 85, 88, 91, 94, 97, 100, 103, 106, 108, - 73, 78, 82, 87, 91, 95, 98, 102, 105, 109, 112, 114, 117, 119, 122, 124, - 91, 96, 101, 105, 109, 113, 116, 119, 122, 125, 127, 128, 128, 128, 128, 128, - 108, 113, 117, 121, 124, 127, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128}; + { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, + 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, + 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, + 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, + 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, + 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, + 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, + 104, 109, 114, 118, 121, 124}; /****************************************************************************** @@ -286,7 +286,6 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82546GB_SERDES: case E1000_DEV_ID_82546GB_PCIE: - case E1000_DEV_ID_82546GB_QUAD_COPPER: hw->mac_type = e1000_82546_rev_3; break; case E1000_DEV_ID_82541EI: @@ -305,8 +304,19 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; + case E1000_DEV_ID_82571EB_COPPER: + case E1000_DEV_ID_82571EB_FIBER: + case E1000_DEV_ID_82571EB_SERDES: + hw->mac_type = e1000_82571; + break; + case E1000_DEV_ID_82572EI_COPPER: + case E1000_DEV_ID_82572EI_FIBER: + case E1000_DEV_ID_82572EI_SERDES: + hw->mac_type = e1000_82572; + break; case E1000_DEV_ID_82573E: case E1000_DEV_ID_82573E_IAMT: + case E1000_DEV_ID_82573L: hw->mac_type = e1000_82573; break; default: @@ -315,6 +325,8 @@ e1000_set_mac_type(struct e1000_hw *hw) } switch(hw->mac_type) { + case e1000_82571: + case e1000_82572: case e1000_82573: hw->eeprom_semaphore_present = TRUE; /* fall through */ @@ -351,6 +363,8 @@ e1000_set_media_type(struct e1000_hw *hw) switch (hw->device_id) { case E1000_DEV_ID_82545GM_SERDES: case E1000_DEV_ID_82546GB_SERDES: + case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82572EI_SERDES: hw->media_type = e1000_media_type_internal_serdes; break; default: @@ -523,6 +537,8 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); E1000_WRITE_FLUSH(hw); /* fall through */ + case e1000_82571: + case e1000_82572: ret_val = e1000_get_auto_rd_done(hw); if(ret_val) /* We don't want to continue accessing MAC registers. */ @@ -683,6 +699,9 @@ e1000_init_hw(struct e1000_hw *hw) switch (hw->mac_type) { default: break; + case e1000_82571: + case e1000_82572: + ctrl |= (1 << 22); case e1000_82573: ctrl |= E1000_TXDCTL_COUNT_DESC; break; @@ -694,6 +713,25 @@ e1000_init_hw(struct e1000_hw *hw) e1000_enable_tx_pkt_filtering(hw); } + switch (hw->mac_type) { + default: + break; + case e1000_82571: + ctrl = E1000_READ_REG(hw, TXDCTL1); + ctrl &= ~E1000_TXDCTL_WTHRESH; + ctrl |= E1000_TXDCTL_COUNT_DESC | E1000_TXDCTL_FULL_TX_DESC_WB; + ctrl |= (1 << 22); + E1000_WRITE_REG(hw, TXDCTL1, ctrl); + break; + } + + + + if (hw->mac_type == e1000_82573) { + uint32_t gcr = E1000_READ_REG(hw, GCR); + gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; + E1000_WRITE_REG(hw, GCR, gcr); + } /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link @@ -878,6 +916,14 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) DEBUGFUNC("e1000_setup_fiber_serdes_link"); + /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists + * until explicitly turned off or a power cycle is performed. A read to + * the register does not indicate its status. Therefore, we ensure + * loopback mode is disabled during initialization. + */ + if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) + E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK); + /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. @@ -2943,6 +2989,8 @@ e1000_phy_reset(struct e1000_hw *hw) switch (hw->mac_type) { case e1000_82541_rev_2: + case e1000_82571: + case e1000_82572: ret_val = e1000_phy_hw_reset(hw); if(ret_val) return ret_val; @@ -2981,6 +3029,16 @@ e1000_detect_gig_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_detect_gig_phy"); + /* The 82571 firmware may still be configuring the PHY. In this + * case, we cannot access the PHY until the configuration is done. So + * we explicitly set the PHY values. */ + if(hw->mac_type == e1000_82571 || + hw->mac_type == e1000_82572) { + hw->phy_id = IGP01E1000_I_PHY_ID; + hw->phy_type = e1000_phy_igp_2; + return E1000_SUCCESS; + } + /* Read the PHY ID Registers to identify which PHY is onboard. */ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high); if(ret_val) @@ -3334,6 +3392,21 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eerd = FALSE; eeprom->use_eewr = FALSE; break; + case e1000_82571: + case e1000_82572: + eeprom->type = e1000_eeprom_spi; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->page_size = 32; + eeprom->address_bits = 16; + } else { + eeprom->page_size = 8; + eeprom->address_bits = 8; + } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; + break; case e1000_82573: eeprom->type = e1000_eeprom_spi; eeprom->opcode_bits = 8; @@ -3543,25 +3616,26 @@ e1000_acquire_eeprom(struct e1000_hw *hw) eecd = E1000_READ_REG(hw, EECD); if (hw->mac_type != e1000_82573) { - /* Request EEPROM Access */ - if(hw->mac_type > e1000_82544) { - eecd |= E1000_EECD_REQ; - E1000_WRITE_REG(hw, EECD, eecd); - eecd = E1000_READ_REG(hw, EECD); - while((!(eecd & E1000_EECD_GNT)) && - (i < E1000_EEPROM_GRANT_ATTEMPTS)) { - i++; - udelay(5); - eecd = E1000_READ_REG(hw, EECD); - } - if(!(eecd & E1000_EECD_GNT)) { - eecd &= ~E1000_EECD_REQ; + /* Request EEPROM Access */ + if(hw->mac_type > e1000_82544) { + eecd |= E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); - DEBUGOUT("Could not acquire EEPROM grant\n"); - return -E1000_ERR_EEPROM; + eecd = E1000_READ_REG(hw, EECD); + while((!(eecd & E1000_EECD_GNT)) && + (i < E1000_EEPROM_GRANT_ATTEMPTS)) { + i++; + udelay(5); + eecd = E1000_READ_REG(hw, EECD); + } + if(!(eecd & E1000_EECD_GNT)) { + eecd &= ~E1000_EECD_REQ; + E1000_WRITE_REG(hw, EECD, eecd); + DEBUGOUT("Could not acquire EEPROM grant\n"); + e1000_put_hw_eeprom_semaphore(hw); + return -E1000_ERR_EEPROM; + } } } - } /* Setup EEPROM for Read/Write */ @@ -4064,7 +4138,7 @@ e1000_write_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } - /* 82573 reads only through eerd */ + /* 82573 writes only through eewr */ if(eeprom->use_eewr == TRUE) return e1000_write_eeprom_eewr(hw, offset, words, data); @@ -4353,9 +4427,16 @@ e1000_read_mac_addr(struct e1000_hw * hw) hw->perm_mac_addr[i] = (uint8_t) (eeprom_data & 0x00FF); hw->perm_mac_addr[i+1] = (uint8_t) (eeprom_data >> 8); } - if(((hw->mac_type == e1000_82546) || (hw->mac_type == e1000_82546_rev_3)) && - (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) + switch (hw->mac_type) { + default: + break; + case e1000_82546: + case e1000_82546_rev_3: + case e1000_82571: + if(E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) hw->perm_mac_addr[5] ^= 0x01; + break; + } for(i = 0; i < NODE_ADDRESS_SIZE; i++) hw->mac_addr[i] = hw->perm_mac_addr[i]; @@ -4385,6 +4466,12 @@ e1000_init_rx_addrs(struct e1000_hw *hw) e1000_rar_set(hw, hw->mac_addr, 0); rar_num = E1000_RAR_ENTRIES; + + /* Reserve a spot for the Locally Administered Address to work around + * an 82571 issue in which a reset on one port will reload the MAC on + * the other port. */ + if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) + rar_num -= 1; /* Zero out the other 15 receive addresses. */ DEBUGOUT("Clearing RAR[1-15]\n"); for(i = 1; i < rar_num; i++) { @@ -4427,6 +4514,12 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Clear RAR[1-15] */ DEBUGOUT(" Clearing RAR[1-15]\n"); num_rar_entry = E1000_RAR_ENTRIES; + /* Reserve a spot for the Locally Administered Address to work around + * an 82571 issue in which a reset on one port will reload the MAC on + * the other port. */ + if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) + num_rar_entry -= 1; + for(i = rar_used_count; i < num_rar_entry; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); @@ -4984,7 +5077,6 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, ICTXQEC); temp = E1000_READ_REG(hw, ICTXQMTC); temp = E1000_READ_REG(hw, ICRXDMTC); - } /****************************************************************************** @@ -5151,6 +5243,8 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82571: + case e1000_82572: case e1000_82573: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; @@ -5250,6 +5344,7 @@ e1000_get_cable_length(struct e1000_hw *hw, int32_t ret_val; uint16_t agc_value = 0; uint16_t cur_agc, min_agc = IGP01E1000_AGC_LENGTH_TABLE_SIZE; + uint16_t max_agc = 0; uint16_t i, phy_data; uint16_t cable_length; @@ -5338,6 +5433,40 @@ e1000_get_cable_length(struct e1000_hw *hw, IGP01E1000_AGC_RANGE) : 0; *max_length = e1000_igp_cable_length_table[agc_value] + IGP01E1000_AGC_RANGE; + } else if (hw->phy_type == e1000_phy_igp_2) { + uint16_t agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = + {IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D}; + /* Read the AGC registers for all channels */ + for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) { + ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data); + if (ret_val) + return ret_val; + + /* Getting bits 15:9, which represent the combination of course and + * fine gain values. The result is a number that can be put into + * the lookup table to obtain the approximate cable length. */ + cur_agc = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & + IGP02E1000_AGC_LENGTH_MASK; + + /* Remove min & max AGC values from calculation. */ + if (e1000_igp_2_cable_length_table[min_agc] > e1000_igp_2_cable_length_table[cur_agc]) + min_agc = cur_agc; + if (e1000_igp_2_cable_length_table[max_agc] < e1000_igp_2_cable_length_table[cur_agc]) + max_agc = cur_agc; + + agc_value += e1000_igp_2_cable_length_table[cur_agc]; + } + + agc_value -= (e1000_igp_2_cable_length_table[min_agc] + e1000_igp_2_cable_length_table[max_agc]); + agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); + + /* Calculate cable length with the error range of +/- 10 meters. */ + *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? + (agc_value - IGP02E1000_AGC_RANGE) : 0; + *max_length = agc_value + IGP02E1000_AGC_RANGE; } return E1000_SUCCESS; @@ -6465,6 +6594,8 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) default: msec_delay(5); break; + case e1000_82571: + case e1000_82572: case e1000_82573: while(timeout) { if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break; @@ -6494,10 +6625,31 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw) { + int32_t timeout = PHY_CFG_TIMEOUT; + uint32_t cfg_mask = E1000_EEPROM_CFG_DONE; + DEBUGFUNC("e1000_get_phy_cfg_done"); - /* Simply wait for 10ms */ - msec_delay(10); + switch (hw->mac_type) { + default: + msec_delay(10); + break; + case e1000_82571: + case e1000_82572: + while (timeout) { + if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask) + break; + else + msec_delay(1); + timeout--; + } + + if (!timeout) { + DEBUGOUT("MNG configuration cycle has not completed.\n"); + return -E1000_ERR_RESET; + } + break; + } return E1000_SUCCESS; } @@ -6569,8 +6721,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) return; swsm = E1000_READ_REG(hw, SWSM); - /* Release both semaphores. */ - swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + swsm &= ~(E1000_SWSM_SWESMBI); E1000_WRITE_REG(hw, SWSM, swsm); } @@ -6606,6 +6757,8 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) * if this is the case. We read FWSM to determine the manageability mode. */ switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: case e1000_82573: fwsm = E1000_READ_REG(hw, FWSM); if((fwsm & E1000_FWSM_MODE_MASK) != 0) diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index 51c2b3a18b6f..4f2c196dc314 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -57,6 +57,8 @@ typedef enum { e1000_82541_rev_2, e1000_82547, e1000_82547_rev_2, + e1000_82571, + e1000_82572, e1000_82573, e1000_num_macs } e1000_mac_type; @@ -478,10 +480,16 @@ uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); #define E1000_DEV_ID_82546GB_SERDES 0x107B #define E1000_DEV_ID_82546GB_PCIE 0x108A #define E1000_DEV_ID_82547EI 0x1019 +#define E1000_DEV_ID_82571EB_COPPER 0x105E +#define E1000_DEV_ID_82571EB_FIBER 0x105F +#define E1000_DEV_ID_82571EB_SERDES 0x1060 +#define E1000_DEV_ID_82572EI_COPPER 0x107D +#define E1000_DEV_ID_82572EI_FIBER 0x107E +#define E1000_DEV_ID_82572EI_SERDES 0x107F #define E1000_DEV_ID_82573E 0x108B #define E1000_DEV_ID_82573E_IAMT 0x108C +#define E1000_DEV_ID_82573L 0x109A -#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -833,6 +841,8 @@ struct e1000_ffvt_entry { #define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX #define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX +#define E1000_DISABLE_SERDES_LOOPBACK 0x0400 + /* Register Set. (82543, 82544) * * Registers are defined to be 32 bits and should be accessed as 32 bit values. @@ -853,6 +863,7 @@ struct e1000_ffvt_entry { #define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ #define E1000_FLA 0x0001C /* Flash Access - RW */ #define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ #define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ #define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ @@ -864,6 +875,12 @@ struct e1000_ffvt_entry { #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ #define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ #define E1000_RCTL 0x00100 /* RX Control - RW */ +#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */ +#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */ +#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */ +#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */ +#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */ +#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */ #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ #define E1000_RXCW 0x00180 /* RX Configuration Word - RO */ @@ -895,6 +912,12 @@ struct e1000_ffvt_entry { #define E1000_RDH 0x02810 /* RX Descriptor Head - RW */ #define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */ #define E1000_RDTR 0x02820 /* RX Delay Timer - RW */ +#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */ +#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */ +#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */ +#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */ +#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */ +#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */ #define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */ #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ @@ -980,15 +1003,15 @@ struct e1000_ffvt_entry { #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ -#define E1000_IAC 0x4100 /* Interrupt Assertion Count */ -#define E1000_ICRXPTC 0x4104 /* Interrupt Cause Rx Packet Timer Expire Count */ -#define E1000_ICRXATC 0x4108 /* Interrupt Cause Rx Absolute Timer Expire Count */ -#define E1000_ICTXPTC 0x410C /* Interrupt Cause Tx Packet Timer Expire Count */ -#define E1000_ICTXATC 0x4110 /* Interrupt Cause Tx Absolute Timer Expire Count */ -#define E1000_ICTXQEC 0x4118 /* Interrupt Cause Tx Queue Empty Count */ -#define E1000_ICTXQMTC 0x411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ -#define E1000_ICRXDMTC 0x4120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ -#define E1000_ICRXOC 0x4124 /* Interrupt Cause Receiver Overrun Count */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ #define E1000_RFCTL 0x05008 /* Receive Filter Control*/ #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ @@ -1018,6 +1041,14 @@ struct e1000_ffvt_entry { #define E1000_FWSM 0x05B54 /* FW Semaphore */ #define E1000_FFLT_DBG 0x05F04 /* Debug Register */ #define E1000_HICR 0x08F00 /* Host Inteface Control */ + +/* RSS registers */ +#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */ +#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */ +#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ +#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ /* Register Set (82542) * * Some of the 82542 registers are located at different offsets than they are @@ -1032,6 +1063,7 @@ struct e1000_ffvt_entry { #define E1000_82542_CTRL_EXT E1000_CTRL_EXT #define E1000_82542_FLA E1000_FLA #define E1000_82542_MDIC E1000_MDIC +#define E1000_82542_SCTL E1000_SCTL #define E1000_82542_FCAL E1000_FCAL #define E1000_82542_FCAH E1000_FCAH #define E1000_82542_FCT E1000_FCT @@ -1049,6 +1081,18 @@ struct e1000_ffvt_entry { #define E1000_82542_RDLEN 0x00118 #define E1000_82542_RDH 0x00120 #define E1000_82542_RDT 0x00128 +#define E1000_82542_RDTR0 E1000_82542_RDTR +#define E1000_82542_RDBAL0 E1000_82542_RDBAL +#define E1000_82542_RDBAH0 E1000_82542_RDBAH +#define E1000_82542_RDLEN0 E1000_82542_RDLEN +#define E1000_82542_RDH0 E1000_82542_RDH +#define E1000_82542_RDT0 E1000_82542_RDT +#define E1000_82542_RDTR1 0x00130 +#define E1000_82542_RDBAL1 0x00138 +#define E1000_82542_RDBAH1 0x0013C +#define E1000_82542_RDLEN1 0x00140 +#define E1000_82542_RDH1 0x00148 +#define E1000_82542_RDT1 0x00150 #define E1000_82542_FCRTH 0x00160 #define E1000_82542_FCRTL 0x00168 #define E1000_82542_FCTTV E1000_FCTTV @@ -1197,6 +1241,13 @@ struct e1000_ffvt_entry { #define E1000_82542_ICRXOC E1000_ICRXOC #define E1000_82542_HICR E1000_HICR +#define E1000_82542_CPUVEC E1000_CPUVEC +#define E1000_82542_MRQC E1000_MRQC +#define E1000_82542_RETA E1000_RETA +#define E1000_82542_RSSRK E1000_RSSRK +#define E1000_82542_RSSIM E1000_RSSIM +#define E1000_82542_RSSIR E1000_RSSIR + /* Statistics counters collected by the MAC */ struct e1000_hw_stats { uint64_t crcerrs; @@ -1336,6 +1387,7 @@ struct e1000_hw { boolean_t serdes_link_down; boolean_t tbi_compatibility_en; boolean_t tbi_compatibility_on; + boolean_t laa_is_present; boolean_t phy_reset_disable; boolean_t fc_send_xon; boolean_t fc_strict_ieee; @@ -1374,6 +1426,7 @@ struct e1000_hw { #define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ #define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ @@ -1491,6 +1544,8 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 +#define E1000_CTRL_EXT_CANC 0x04000000 /* Interrupt delay cancellation */ +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ #define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ #define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ @@ -1524,6 +1579,7 @@ struct e1000_hw { #define E1000_LEDCTL_LED2_BLINK 0x00800000 #define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 #define E1000_LEDCTL_LED3_MODE_SHIFT 24 +#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000 #define E1000_LEDCTL_LED3_IVRT 0x40000000 #define E1000_LEDCTL_LED3_BLINK 0x80000000 @@ -1784,6 +1840,16 @@ struct e1000_hw { #define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ #define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ +/* Multiple Receive Queue Control */ +#define E1000_MRQC_ENABLE_MASK 0x00000003 +#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001 +#define E1000_MRQC_ENABLE_RSS_INT 0x00000004 +#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000 +#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 /* Definitions for power management and wakeup registers */ /* Wake Up Control */ @@ -1928,6 +1994,7 @@ struct e1000_host_command_info { #define E1000_MDALIGN 4096 #define E1000_GCR_BEM32 0x00400000 +#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 /* Function Active and Power State to MNG */ #define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 #define E1000_FACTPS_LAN0_VALID 0x00000004 @@ -1980,6 +2047,7 @@ struct e1000_host_command_info { /* EEPROM Word Offsets */ #define EEPROM_COMPAT 0x0003 #define EEPROM_ID_LED_SETTINGS 0x0004 +#define EEPROM_VERSION 0x0005 #define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */ #define EEPROM_PHY_CLASS_WORD 0x0007 #define EEPROM_INIT_CONTROL1_REG 0x000A @@ -1990,6 +2058,8 @@ struct e1000_host_command_info { #define EEPROM_FLASH_VERSION 0x0032 #define EEPROM_CHECKSUM_REG 0x003F +#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */ + /* Word definitions for ID LED Settings */ #define ID_LED_RESERVED_0000 0x0000 #define ID_LED_RESERVED_FFFF 0xFFFF @@ -2108,6 +2178,8 @@ struct e1000_host_command_info { #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 #define E1000_PBA_30K 0x001E +#define E1000_PBA_32K 0x0020 +#define E1000_PBA_38K 0x0026 #define E1000_PBA_40K 0x0028 #define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */ @@ -2592,11 +2664,11 @@ struct e1000_host_command_info { /* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */ #define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128 -#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 128 +#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113 /* The precision error of the cable length is +/- 10 meters */ #define IGP01E1000_AGC_RANGE 10 -#define IGP02E1000_AGC_RANGE 10 +#define IGP02E1000_AGC_RANGE 15 /* IGP01E1000 PCS Initialization register */ /* bits 3:6 in the PCS registers stores the channels polarity */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index c062b0ad8262..407abb2c0548 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -398,6 +398,10 @@ e1000_reset(struct e1000_adapter *adapter) case e1000_82547_rev_2: pba = E1000_PBA_30K; break; + case e1000_82571: + case e1000_82572: + pba = E1000_PBA_38K; + break; case e1000_82573: pba = E1000_PBA_12K; break; @@ -475,6 +479,7 @@ e1000_probe(struct pci_dev *pdev, struct net_device *netdev; struct e1000_adapter *adapter; unsigned long mmio_start, mmio_len; + uint32_t ctrl_ext; uint32_t swsm; static int cards_found = 0; @@ -688,6 +693,12 @@ e1000_probe(struct pci_dev *pdev, /* Let firmware know the driver has taken over */ switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, @@ -732,6 +743,7 @@ e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); + uint32_t ctrl_ext; uint32_t manc, swsm; flush_scheduled_work(); @@ -746,6 +758,12 @@ e1000_remove(struct pci_dev *pdev) } switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, @@ -1236,7 +1254,7 @@ e1000_setup_rctl(struct e1000_adapter *adapter) rctl |= E1000_RCTL_LPE; /* Setup buffer sizes */ - if(adapter->hw.mac_type == e1000_82573) { + if(adapter->hw.mac_type >= e1000_82571) { /* We can now specify buffers in 1K increments. * BSIZE and BSEX are ignored in this case. */ rctl |= adapter->rx_buffer_len << 0x11; @@ -1352,7 +1370,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) if(adapter->rx_csum == TRUE) { rxcsum |= E1000_RXCSUM_TUOFL; - /* Enable 82573 IPv4 payload checksum for UDP fragments + /* Enable 82571 IPv4 payload checksum for UDP fragments * Must be used in conjunction with packet-split. */ if((adapter->hw.mac_type > e1000_82547_rev_2) && (adapter->rx_ps)) { @@ -1608,6 +1626,22 @@ e1000_set_mac(struct net_device *netdev, void *p) e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0); + /* With 82571 controllers, LAA may be overwritten (with the default) + * due to controller reset from the other port. */ + if (adapter->hw.mac_type == e1000_82571) { + /* activate the work around */ + adapter->hw.laa_is_present = 1; + + /* Hold a copy of the LAA in RAR[14] This is done so that + * between the time RAR[0] gets clobbered and the time it + * gets fixed (in e1000_watchdog), the actual LAA is in one + * of the RARs and no incoming packets directed to this port + * are dropped. Eventaully the LAA will be in RAR[0] and + * RAR[14] */ + e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, + E1000_RAR_ENTRIES - 1); + } + if(adapter->hw.mac_type == e1000_82542_rev2_0) e1000_leave_82542_rst(adapter); @@ -1633,9 +1667,12 @@ e1000_set_multi(struct net_device *netdev) unsigned long flags; uint32_t rctl; uint32_t hash_value; - int i; + int i, rar_entries = E1000_RAR_ENTRIES; spin_lock_irqsave(&adapter->tx_lock, flags); + /* reserve RAR[14] for LAA over-write work-around */ + if (adapter->hw.mac_type == e1000_82571) + rar_entries--; /* Check for Promiscuous and All Multicast modes */ @@ -1660,11 +1697,12 @@ e1000_set_multi(struct net_device *netdev) /* load the first 14 multicast address into the exact filters 1-14 * RAR 0 is used for the station MAC adddress * if there are not 14 addresses, go ahead and clear the filters + * -- with 82571 controllers only 0-13 entries are filled here */ mc_ptr = netdev->mc_list; - for(i = 1; i < E1000_RAR_ENTRIES; i++) { - if(mc_ptr) { + for(i = 1; i < rar_entries; i++) { + if (mc_ptr) { e1000_rar_set(hw, mc_ptr->dmi_addr, i); mc_ptr = mc_ptr->next; } else { @@ -1848,6 +1886,11 @@ e1000_watchdog_task(struct e1000_adapter *adapter) /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = TRUE; + /* With 82571 controllers, LAA may be overwritten due to controller + * reset from the other port. Set the appropriate LAA in RAR[0] */ + if (adapter->hw.mac_type == e1000_82571 && adapter->hw.laa_is_present) + e1000_rar_set(&adapter->hw, adapter->hw.mac_addr, 0); + /* Reset the timer */ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); } @@ -2269,6 +2312,27 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) local_irq_restore(flags); return NETDEV_TX_LOCKED; } +#ifdef NETIF_F_TSO + /* TSO Workaround for 82571/2 Controllers -- if skb->data + * points to just header, pull a few bytes of payload from + * frags into skb->data */ + if (skb_shinfo(skb)->tso_size) { + uint8_t hdr_len; + hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); + if (skb->data_len && (hdr_len < (skb->len - skb->data_len)) && + (adapter->hw.mac_type == e1000_82571 || + adapter->hw.mac_type == e1000_82572)) { + unsigned int pull_size; + pull_size = min((unsigned int)4, skb->data_len); + if (!__pskb_pull_tail(skb, pull_size)) { + printk(KERN_ERR "__pskb_pull_tail failed.\n"); + dev_kfree_skb_any(skb); + return -EFAULT; + } + } + } +#endif + if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) ) e1000_transfer_dhcp_info(adapter, skb); @@ -2310,7 +2374,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tx_flags |= E1000_TX_FLAGS_CSUM; /* Old method was to assume IPv4 packet by default if TSO was enabled. - * 82573 hardware supports TSO capabilities for IPv6 as well... + * 82571 hardware supports TSO capabilities for IPv6 as well... * no longer assume, we must. */ if(likely(skb->protocol == ntohs(ETH_P_IP))) tx_flags |= E1000_TX_FLAGS_IPV4; @@ -2389,9 +2453,18 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } -#define MAX_STD_JUMBO_FRAME_SIZE 9216 +#define MAX_STD_JUMBO_FRAME_SIZE 9234 /* might want this to be bigger enum check... */ - if (adapter->hw.mac_type == e1000_82573 && + /* 82571 controllers limit jumbo frame size to 10500 bytes */ + if ((adapter->hw.mac_type == e1000_82571 || + adapter->hw.mac_type == e1000_82572) && + max_frame > MAX_STD_JUMBO_FRAME_SIZE) { + DPRINTK(PROBE, ERR, "MTU > 9216 bytes not supported " + "on 82571 and 82572 controllers.\n"); + return -EINVAL; + } + + if(adapter->hw.mac_type == e1000_82573 && max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported " "on 82573\n"); @@ -3716,6 +3789,12 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) } switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, @@ -3738,6 +3817,7 @@ e1000_resume(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); uint32_t manc, ret_val, swsm; + uint32_t ctrl_ext; pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); @@ -3763,6 +3843,12 @@ e1000_resume(struct pci_dev *pdev) } switch(adapter->hw.mac_type) { + case e1000_82571: + case e1000_82572: + ctrl_ext = E1000_READ_REG(&adapter->hw, CTRL_EXT); + E1000_WRITE_REG(&adapter->hw, CTRL_EXT, + ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); + break; case e1000_82573: swsm = E1000_READ_REG(&adapter->hw, SWSM); E1000_WRITE_REG(&adapter->hw, SWSM, -- 2.20.1