From 8642fc4e2bd5e310eeacc4da8e88746deebf2310 Mon Sep 17 00:00:00 2001 From: Shane Warden Date: Mon, 21 Sep 2009 11:51:44 -0700 Subject: [PATCH] Staging: comedi: ni_labpc.h: Fixed line lengths of some trailing comments. Signed-off-by: Shane Warden Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/ni_labpc.h | 52 +++++++++++++++++------ 1 file changed, 39 insertions(+), 13 deletions(-) diff --git a/drivers/staging/comedi/drivers/ni_labpc.h b/drivers/staging/comedi/drivers/ni_labpc.h index 82596345dcf4..422cee58a967 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.h +++ b/drivers/staging/comedi/drivers/ni_labpc.h @@ -38,19 +38,27 @@ struct labpc_board_struct { int device_id; /* device id for pci and pcmcia boards */ int ai_speed; /* maximum input speed in nanoseconds */ enum labpc_bustype bustype; /* ISA/PCI/etc. */ - enum labpc_register_layout register_layout; /* 1200 has extra registers compared to pc+ */ + + /* 1200 has extra registers compared to pc+ */ + enum labpc_register_layout register_layout; int has_ao; /* has analog output true/false */ const struct comedi_lrange *ai_range_table; const int *ai_range_code; const int *ai_range_is_unipolar; - unsigned ai_scan_up:1; /* board can auto scan up in ai channels, not just down */ - unsigned memory_mapped_io:1; /* uses memory mapped io instead of ioports */ + + /* board can auto scan up in ai channels, not just down */ + unsigned ai_scan_up:1; + + /* uses memory mapped io instead of ioports */ + unsigned memory_mapped_io:1; }; struct labpc_private { struct mite_struct *mite; /* for mite chip on pci-1200 */ - volatile unsigned long long count; /* number of data points left to be taken */ - unsigned int ao_value[NUM_AO_CHAN]; /* software copy of analog output values */ + /* number of data points left to be taken */ + volatile unsigned long long count; + /* software copy of analog output values */ + unsigned int ao_value[NUM_AO_CHAN]; /* software copys of bits written to command registers */ volatile unsigned int command1_bits; volatile unsigned int command2_bits; @@ -61,16 +69,34 @@ struct labpc_private { /* store last read of board status registers */ volatile unsigned int status1_bits; volatile unsigned int status2_bits; - unsigned int divisor_a0; /* value to load into board's counter a0 (conversion pacing) for timed conversions */ - unsigned int divisor_b0; /* value to load into board's counter b0 (master) for timed conversions */ - unsigned int divisor_b1; /* value to load into board's counter b1 (scan pacing) for timed conversions */ + /* + * value to load into board's counter a0 (conversion pacing) for timed + * conversions + */ + unsigned int divisor_a0; + /* + * value to load into board's counter b0 (master) for timed conversions + */ + unsigned int divisor_b0; + /* + * value to load into board's counter b1 (scan pacing) for timed + * conversions + */ + unsigned int divisor_b1; unsigned int dma_chan; /* dma channel to use */ u16 *dma_buffer; /* buffer ai will dma into */ - unsigned int dma_transfer_size; /* transfer size in bytes for current transfer */ - enum transfer_type current_transfer; /* we are using dma/fifo-half-full/etc. */ - unsigned int eeprom_data[EEPROM_SIZE]; /* stores contents of board's eeprom */ - unsigned int caldac[16]; /* stores settings of calibration dacs */ - /* function pointers so we can use inb/outb or readb/writeb as appropriate */ + /* transfer size in bytes for current transfer */ + unsigned int dma_transfer_size; + /* we are using dma/fifo-half-full/etc. */ + enum transfer_type current_transfer; + /* stores contents of board's eeprom */ + unsigned int eeprom_data[EEPROM_SIZE]; + /* stores settings of calibration dacs */ + unsigned int caldac[16]; + /* + * function pointers so we can use inb/outb or readb/writeb as + * appropriate + */ unsigned int (*read_byte) (unsigned long address); void (*write_byte) (unsigned int byte, unsigned long address); }; -- 2.20.1