From 85c996907473e4ef824774b97b26499adf66521f Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Wed, 31 Jul 2013 14:55:45 +0400 Subject: [PATCH] serial: sccnxp: Add DT support Add DT support to the SCCNCP serial driver. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- .../bindings/tty/serial/sccnxp-serial.txt | 53 +++++++++++++++++++ drivers/tty/serial/sccnxp.c | 46 ++++++++++++---- include/linux/platform_data/serial-sccnxp.h | 6 +-- 3 files changed, 93 insertions(+), 12 deletions(-) create mode 100644 Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt diff --git a/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt b/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt new file mode 100644 index 000000000000..d18b1698133e --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/sccnxp-serial.txt @@ -0,0 +1,53 @@ +* NXP (Philips) SCC+++(SCN+++) serial driver + +Required properties: +- compatible: Should be "nxp,". The supported ICs include sc2681, + sc2691, sc2692, sc2891, sc2892, sc28202, sc68681 and sc68692. +- reg: Address and length of the register set for the device. +- interrupts: Should contain the interrupt number. If omitted, + polling mode will be used instead, so "poll-interval" property should + be populated in this case. + +Optional properties: +- clocks: Phandle to input clock. If omitted, default IC frequency will be + used instead. +- poll-interval: Poll interval time in nanoseconds. +- vcc-supply: The regulator supplying the VCC to drive the chip. +- nxp,sccnxp-io-cfg: Array contains values for the emulated modem signals. + The number of values depends on the UART-number in the selected chip. + Each value should be composed according to the following rules: + (LINE1 << SIGNAL1) | ... | (LINEX << SIGNALX), where: + LINE - VALUE: + OP0 - 1 + OP1 - 2 + OP2 - 3 + OP3 - 4 + OP4 - 5 + OP5 - 6 + OP6 - 7 + OP7 - 8 + IP0 - 9 + IP1 - 10 + IP2 - 11 + IP3 - 12 + IP4 - 13 + IP5 - 14 + IP6 - 15 + SIGNAL - VALUE: + DTR - 0 + RTS - 4 + DSR - 8 + CTS - 12 + DCD - 16 + RNG - 20 + DIR - 24 + +Example (Dual UART with direction control on OP0 & OP1): +sc2892@10100000 { + compatible = "nxp,sc2892"; + reg = <0x10100000 0x10>; + poll-interval = <10000>; + clocks = <&sc2892_clk>; + vcc-supply = <&sc2892_reg>; + nxp,sccnxp-io-cfg = <0x01000000 0x02000000>; +}; diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index 49e9bbfe6cab..67f73d1a8e7b 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -20,6 +20,8 @@ #include #include #include +#include +#include #include #include #include @@ -853,10 +855,25 @@ static const struct platform_device_id sccnxp_id_table[] = { }; MODULE_DEVICE_TABLE(platform, sccnxp_id_table); +static const struct of_device_id sccnxp_dt_id_table[] = { + { .compatible = "nxp,sc2681", .data = &sc2681, }, + { .compatible = "nxp,sc2691", .data = &sc2691, }, + { .compatible = "nxp,sc2692", .data = &sc2692, }, + { .compatible = "nxp,sc2891", .data = &sc2891, }, + { .compatible = "nxp,sc2892", .data = &sc2892, }, + { .compatible = "nxp,sc28202", .data = &sc28202, }, + { .compatible = "nxp,sc68681", .data = &sc68681, }, + { .compatible = "nxp,sc68692", .data = &sc68692, }, + { } +}; +MODULE_DEVICE_TABLE(of, sccnxp_dt_id_table); + static int sccnxp_probe(struct platform_device *pdev) { struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); struct sccnxp_pdata *pdata = dev_get_platdata(&pdev->dev); + const struct of_device_id *of_id = + of_match_device(sccnxp_dt_id_table, &pdev->dev); int i, ret, uartclk; struct sccnxp_port *s; void __iomem *membase; @@ -875,7 +892,22 @@ static int sccnxp_probe(struct platform_device *pdev) spin_lock_init(&s->lock); - s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; + if (of_id) { + s->chip = (struct sccnxp_chip *)of_id->data; + + of_property_read_u32(pdev->dev.of_node, "poll-interval", + &s->pdata.poll_time_us); + of_property_read_u32(pdev->dev.of_node, "reg-shift", + &s->pdata.reg_shift); + of_property_read_u32_array(pdev->dev.of_node, + "nxp,sccnxp-io-cfg", + s->pdata.mctrl_cfg, s->chip->nr); + } else { + s->chip = (struct sccnxp_chip *)pdev->id_entry->driver_data; + + if (pdata) + memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); + } s->regulator = devm_regulator_get(&pdev->dev, "vcc"); if (!IS_ERR(s->regulator)) { @@ -906,16 +938,11 @@ static int sccnxp_probe(struct platform_device *pdev) goto err_out; } - if (pdata) - memcpy(&s->pdata, pdata, sizeof(struct sccnxp_pdata)); - if (s->pdata.poll_time_us) { dev_info(&pdev->dev, "Using poll mode, resolution %u usecs\n", s->pdata.poll_time_us); s->poll = 1; - } - - if (!s->poll) { + } else { s->irq = platform_get_irq(pdev, 0); if (s->irq < 0) { dev_err(&pdev->dev, "Missing irq resource data\n"); @@ -1016,8 +1043,9 @@ static int sccnxp_remove(struct platform_device *pdev) static struct platform_driver sccnxp_uart_driver = { .driver = { - .name = SCCNXP_NAME, - .owner = THIS_MODULE, + .name = SCCNXP_NAME, + .owner = THIS_MODULE, + .of_match_table = sccnxp_dt_id_table, }, .probe = sccnxp_probe, .remove = sccnxp_remove, diff --git a/include/linux/platform_data/serial-sccnxp.h b/include/linux/platform_data/serial-sccnxp.h index af0c8c3b89ae..98373d6add27 100644 --- a/include/linux/platform_data/serial-sccnxp.h +++ b/include/linux/platform_data/serial-sccnxp.h @@ -78,11 +78,11 @@ /* SCCNXP platform data structure */ struct sccnxp_pdata { /* Shift for A0 line */ - const u8 reg_shift; + u32 reg_shift; /* Modem control lines configuration */ - const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + u32 mctrl_cfg[SCCNXP_MAX_UARTS]; /* Timer value for polling mode (usecs) */ - const unsigned int poll_time_us; + u32 poll_time_us; }; #endif -- 2.20.1