From 858156bd6c24f12c3fca94bceacb05fa9a2daef4 Mon Sep 17 00:00:00 2001 From: Jamie Lentin Date: Wed, 18 Apr 2012 11:06:42 +0100 Subject: [PATCH] kirkwood: Allow nand to be configured via. devicetree Add default configuration for NAND, to be enabled in your board config. Ensure clock gating is set appropriately when the NAND is enabled. Acked-by: Jason Cooper Signed-off-by: Jamie Lentin Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood.dtsi | 15 ++++++++++++++- arch/arm/mach-kirkwood/common.c | 12 ++++++++++++ 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 3474ef890945..926528b81baa 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -5,7 +5,7 @@ ocp@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x1000000>; + ranges = <0 0xf1000000 0x4000000>; #address-cells = <1>; #size-cells = <1>; @@ -32,5 +32,18 @@ reg = <0x10300 0x20>; interrupts = <53>; }; + + nand@3000000 { + #address-cells = <1>; + #size-cells = <1>; + cle = <0>; + ale = <1>; + bank-width = <1>; + compatible = "mrvl,orion-nand"; + reg = <0x3000000 0x400>; + chip-delay = <25>; + /* set partition map and/or chip-delay in board dts */ + status = "disabled"; + }; }; }; diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index a02cae881f2f..3ad037385a5e 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -482,6 +483,9 @@ static int __init kirkwood_clock_gate(void) unsigned int curr = readl(CLOCK_GATING_CTRL); u32 dev, rev; +#ifdef CONFIG_OF + struct device_node *np; +#endif kirkwood_pcie_id(&dev, &rev); printk(KERN_DEBUG "Gating clock of unused units\n"); printk(KERN_DEBUG "before: 0x%08x\n", curr); @@ -489,6 +493,14 @@ static int __init kirkwood_clock_gate(void) /* Make sure those units are accessible */ writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL); +#ifdef CONFIG_OF + np = of_find_compatible_node(NULL, NULL, "mrvl,orion-nand"); + if (np && of_device_is_available(np)) { + kirkwood_clk_ctrl |= CGC_RUNIT; + of_node_put(np); + } +#endif + /* For SATA: first shutdown the phy */ if (!(kirkwood_clk_ctrl & CGC_SATA0)) { /* Disable PLL and IVREF */ -- 2.20.1