From 8413299cb3933dade6186bbee8363f190032107e Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Fri, 27 Jan 2017 15:45:11 +0100 Subject: [PATCH] ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk Since v4.10-rc1, the following logs appears in loop : [ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 801.966611] usb usb6-port1: cannot disable (err = -32) [ 806.083772] usb usb6-port1: Cannot enable. Maybe the USB cable is bad? [ 806.090370] xhci-hcd xhci-hcd.0.auto: Cannot set link state. [ 806.096494] usb usb6-port1: cannot disable (err = -32) After analysis, xhci try to set link in U3 and returns an error. Using snps,dis_u3_susphy_quirk fix this issue. Signed-off-by: Patrice Chotard --- arch/arm/boot/dts/stih407-family.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index c8b2944e304a..ace97e8576db 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -680,6 +680,7 @@ phy-names = "usb2-phy", "usb3-phy"; phys = <&usb2_picophy0>, <&phy_port2 PHY_TYPE_USB3>; + snps,dis_u3_susphy_quirk; }; }; -- 2.20.1