From 83c61fa97a7d4ef16506a760f9e52b3144978346 Mon Sep 17 00:00:00 2001 From: Greg Rose Date: Wed, 7 Sep 2011 05:59:35 +0000 Subject: [PATCH] ixgbe: Add protection from VF invalid target DMA It is possible for a VF to set an invalid target DMA address in its Tx/Rx descriptor buffer pointers. The workarounds in this patch will guard against such an event and issue a VFLR to the VF in response. The VFLR will shut down the VF until an administrator can take action to investigate the event and correct the problem. Signed-off-by: Greg Rose Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe.h | 4 + drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 172 +++++++++++++++++- 2 files changed, 175 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 38940d72991d..c1f76aaf8774 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -116,6 +116,8 @@ #define MAX_EMULATION_MAC_ADDRS 16 #define IXGBE_MAX_PF_MACVLANS 15 #define VMDQ_P(p) ((p) + adapter->num_vfs) +#define IXGBE_82599_VF_DEVICE_ID 0x10ED +#define IXGBE_X540_VF_DEVICE_ID 0x1515 struct vf_data_storage { unsigned char vf_mac_addresses[ETH_ALEN]; @@ -512,6 +514,8 @@ struct ixgbe_adapter { struct hlist_head fdir_filter_list; union ixgbe_atr_input fdir_mask; int fdir_filter_count; + u32 timer_event_accumulator; + u32 vferr_refcount; }; struct ixgbe_fdir_filter { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 1519a23421af..b95c6e979832 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -6112,6 +6112,51 @@ static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); } +#ifdef CONFIG_PCI_IOV +static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter) +{ + int vf; + struct ixgbe_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 gpc; + u32 ciaa, ciad; + + gpc = IXGBE_READ_REG(hw, IXGBE_TXDGPC); + if (gpc) /* If incrementing then no need for the check below */ + return; + /* + * Check to see if a bad DMA write target from an errant or + * malicious VF has caused a PCIe error. If so then we can + * issue a VFLR to the offending VF(s) and then resume without + * requesting a full slot reset. + */ + + for (vf = 0; vf < adapter->num_vfs; vf++) { + ciaa = (vf << 16) | 0x80000000; + /* 32 bit read so align, we really want status at offset 6 */ + ciaa |= PCI_COMMAND; + IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); + ciad = IXGBE_READ_REG(hw, IXGBE_CIAD_82599); + ciaa &= 0x7FFFFFFF; + /* disable debug mode asap after reading data */ + IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); + /* Get the upper 16 bits which will be the PCI status reg */ + ciad >>= 16; + if (ciad & PCI_STATUS_REC_MASTER_ABORT) { + netdev_err(netdev, "VF %d Hung DMA\n", vf); + /* Issue VFLR */ + ciaa = (vf << 16) | 0x80000000; + ciaa |= 0xA8; + IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); + ciad = 0x00008000; /* VFLR */ + IXGBE_WRITE_REG(hw, IXGBE_CIAD_82599, ciad); + ciaa &= 0x7FFFFFFF; + IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); + } + } +} + +#endif /** * ixgbe_service_timer - Timer Call-back * @data: pointer to adapter cast into an unsigned long @@ -6120,17 +6165,49 @@ static void ixgbe_service_timer(unsigned long data) { struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; unsigned long next_event_offset; + bool ready = true; +#ifdef CONFIG_PCI_IOV + ready = false; + + /* + * don't bother with SR-IOV VF DMA hang check if there are + * no VFs or the link is down + */ + if (!adapter->num_vfs || + (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) { + ready = true; + goto normal_timer_service; + } + + /* If we have VFs allocated then we must check for DMA hangs */ + ixgbe_check_for_bad_vf(adapter); + next_event_offset = HZ / 50; + adapter->timer_event_accumulator++; + + if (adapter->timer_event_accumulator >= 100) { + ready = true; + adapter->timer_event_accumulator = 0; + } + + goto schedule_event; + +normal_timer_service: +#endif /* poll faster when waiting for link */ if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) next_event_offset = HZ / 10; else next_event_offset = HZ * 2; +#ifdef CONFIG_PCI_IOV +schedule_event: +#endif /* Reset the timer */ mod_timer(&adapter->service_timer, next_event_offset + jiffies); - ixgbe_service_event_schedule(adapter); + if (ready) + ixgbe_service_event_schedule(adapter); } static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter) @@ -7717,6 +7794,91 @@ static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); struct net_device *netdev = adapter->netdev; +#ifdef CONFIG_PCI_IOV + struct pci_dev *bdev, *vfdev; + u32 dw0, dw1, dw2, dw3; + int vf, pos; + u16 req_id, pf_func; + + if (adapter->hw.mac.type == ixgbe_mac_82598EB || + adapter->num_vfs == 0) + goto skip_bad_vf_detection; + + bdev = pdev->bus->self; + while (bdev && (bdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT)) + bdev = bdev->bus->self; + + if (!bdev) + goto skip_bad_vf_detection; + + pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR); + if (!pos) + goto skip_bad_vf_detection; + + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG, &dw0); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 4, &dw1); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 8, &dw2); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 12, &dw3); + + req_id = dw1 >> 16; + /* On the 82599 if bit 7 of the requestor ID is set then it's a VF */ + if (!(req_id & 0x0080)) + goto skip_bad_vf_detection; + + pf_func = req_id & 0x01; + if ((pf_func & 1) == (pdev->devfn & 1)) { + unsigned int device_id; + + vf = (req_id & 0x7F) >> 1; + e_dev_err("VF %d has caused a PCIe error\n", vf); + e_dev_err("TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: " + "%8.8x\tdw3: %8.8x\n", + dw0, dw1, dw2, dw3); + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + device_id = IXGBE_82599_VF_DEVICE_ID; + break; + case ixgbe_mac_X540: + device_id = IXGBE_X540_VF_DEVICE_ID; + break; + default: + device_id = 0; + break; + } + + /* Find the pci device of the offending VF */ + vfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, device_id, NULL); + while (vfdev) { + if (vfdev->devfn == (req_id & 0xFF)) + break; + vfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, + device_id, vfdev); + } + /* + * There's a slim chance the VF could have been hot plugged, + * so if it is no longer present we don't need to issue the + * VFLR. Just clean up the AER in that case. + */ + if (vfdev) { + e_dev_err("Issuing VFLR to VF %d\n", vf); + pci_write_config_dword(vfdev, 0xA8, 0x00008000); + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + } + + /* + * Even though the error may have occurred on the other port + * we still need to increment the vf error reference count for + * both ports because the I/O resume function will be called + * for both of them. + */ + adapter->vferr_refcount++; + + return PCI_ERS_RESULT_RECOVERED; + +skip_bad_vf_detection: +#endif /* CONFIG_PCI_IOV */ netif_device_detach(netdev); if (state == pci_channel_io_perm_failure) @@ -7779,6 +7941,14 @@ static void ixgbe_io_resume(struct pci_dev *pdev) struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); struct net_device *netdev = adapter->netdev; +#ifdef CONFIG_PCI_IOV + if (adapter->vferr_refcount) { + e_info(drv, "Resuming after VF err\n"); + adapter->vferr_refcount--; + return; + } + +#endif if (netif_running(netdev)) ixgbe_up(adapter); -- 2.20.1