From 8334271882b46e4bc15337ed27428be121156165 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 10 May 2012 12:14:15 +0300 Subject: [PATCH] wl18xx: add module parameter to force SISO 20MHz In some cases it may be useful to force narrow-band SISO channels. Add a new value to the ht_mode module parameter to force the device to operate in SISO 20MHz. Signed-off-by: Luciano Coelho Signed-off-by: Arik Nemtsov --- drivers/net/wireless/ti/wl18xx/main.c | 38 ++++++++++++++++++++++----- 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 6a81edf702eb..07955984face 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1055,7 +1055,7 @@ static struct wlcore_ops wl18xx_ops = { }; /* HT cap appropriate for wide channels */ -static struct ieee80211_sta_ht_cap wl18xx_ht_cap = { +static struct ieee80211_sta_ht_cap wl18xx_siso40_ht_cap = { .cap = IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_DSSSCCK40, .ht_supported = true, @@ -1068,6 +1068,19 @@ static struct ieee80211_sta_ht_cap wl18xx_ht_cap = { }, }; +/* HT cap appropriate for SISO 20 */ +static struct ieee80211_sta_ht_cap wl18xx_siso20_ht_cap = { + .cap = IEEE80211_HT_CAP_SGI_20, + .ht_supported = true, + .ampdu_factor = IEEE80211_HT_MAX_AMPDU_16K, + .ampdu_density = IEEE80211_HT_MPDU_DENSITY_16, + .mcs = { + .rx_mask = { 0xff, 0, 0, 0, 0, 0, 0, 0, 0, 0, }, + .rx_highest = cpu_to_le16(72), + .tx_params = IEEE80211_HT_MCS_TX_DEFINED, + }, +}; + /* HT cap appropriate for MIMO rates in 20mhz channel */ static struct ieee80211_sta_ht_cap wl18xx_mimo_ht_cap = { .cap = IEEE80211_HT_CAP_SGI_20, @@ -1108,10 +1121,20 @@ int __devinit wl18xx_probe(struct platform_device *pdev) wl->fw_status_priv_len = sizeof(struct wl18xx_fw_status_priv); wl->stats.fw_stats_len = sizeof(struct wl18xx_acx_statistics); wl->static_data_priv_len = sizeof(struct wl18xx_static_data_priv); - memcpy(&wl->ht_cap, &wl18xx_ht_cap, sizeof(wl18xx_ht_cap)); - if (!strcmp(ht_mode_param, "mimo")) + + if (!strcmp(ht_mode_param, "wide")) { + memcpy(&wl->ht_cap, &wl18xx_siso40_ht_cap, + sizeof(wl18xx_siso40_ht_cap)); + } else if (!strcmp(ht_mode_param, "mimo")) { memcpy(&wl->ht_cap, &wl18xx_mimo_ht_cap, sizeof(wl18xx_mimo_ht_cap)); + } else if (!strcmp(ht_mode_param, "siso20")) { + memcpy(&wl->ht_cap, &wl18xx_siso20_ht_cap, + sizeof(wl18xx_siso20_ht_cap)); + } else { + wl1271_error("invalid ht_mode '%s'", ht_mode_param); + goto out_free; + } wl18xx_conf_init(wl); @@ -1131,8 +1154,7 @@ int __devinit wl18xx_probe(struct platform_device *pdev) priv->conf.phy.low_band_component_type = 0x06; } else { wl1271_error("invalid board type '%s'", board_type_param); - wlcore_free_hw(wl); - return -EINVAL; + goto out_free; } if (!checksum_param) { @@ -1143,6 +1165,10 @@ int __devinit wl18xx_probe(struct platform_device *pdev) wl->enable_11a = enable_11a_param; return wlcore_probe(wl, pdev); + +out_free: + wlcore_free_hw(wl); + return -EINVAL; } static const struct platform_device_id wl18xx_id_table[] __devinitconst = { @@ -1174,7 +1200,7 @@ static void __exit wl18xx_exit(void) module_exit(wl18xx_exit); module_param_named(ht_mode, ht_mode_param, charp, S_IRUSR); -MODULE_PARM_DESC(ht_mode, "Force HT mode: wide or mimo"); +MODULE_PARM_DESC(ht_mode, "Force HT mode: wide (default), mimo or siso20"); module_param_named(board_type, board_type_param, charp, S_IRUSR); MODULE_PARM_DESC(board_type, "Board type: fpga, hdk (default), evb, com8 or " -- 2.20.1