From 82a28bcf5606ef1e9f527e9750cf9f44b0986de7 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 27 Mar 2013 15:55:01 +0100 Subject: [PATCH] drm/i915: implement ibx_hpd_irq_setup MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit This fixes a regression introduced in commit e5868a318d1ae28f760f77bb91ce5deb751733fd Author: Egbert Eich Date: Thu Feb 28 04:17:12 2013 -0500 DRM/i915: Convert HPD interrupts to make use of HPD pin assignment in encode Due to the irq setup rework in 3.9, see commit 20afbda209d708be66944907966486d0c1331cb8 Author: Daniel Vetter Date: Tue Dec 11 14:05:07 2012 +0100 drm/i915: Fixup hpd irq register setup ordering Egbert Eich's hpd rework blows up on pch-split platforms - it walks the encoder list before that has been set up completely. The new init sequence is: 1. irq enabling 2. modeset init 3. hpd setup We need to move around the ibx setup a bit to fix this. Ville Syrjälä pointed out in his review that we can't touch SDEIER after the interrupt handler is set up, since that'll race with Paulo Zanoni's PCH interrupt race fix: commit 44498aea293b37af1d463acd9658cdce1ecdf427 Author: Paulo Zanoni Date: Fri Feb 22 17:05:28 2013 -0300 drm/i915: also disable south interrupts when handling them We fix that by unconditionally enabling all interrupts in SDEIER, but masking them as-needed in SDEIMR. Since only the single-threaded setup/teardown (or suspend/resume) code touches that, no further locking is required. While at it also simplify the mask handling - we start out with all interrupts cleared in the postinstall hook, and never enable a hpd interrupt before hpd_irq_setup is called. And finally, for consistency rename the ibx hpd setup function to ibx_hpd_irq_setup. v2: Fix race around SDEIER writes (Ville). v3: Remove the superflous posting read for SDEIER, spotted by Ville. Ville also wondered whether we shouldn't clear SDEIIR, since now SDE interrupts are enabled before we have an irq handler installed. But the master interrupt control bit in DEIER is still cleared, so we should be fine. Cc: Egbert Eich Cc: Jesse Barnes Cc: Paulo Zanoni Cc: Ville Syrjälä Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=62798 Reviewed-by: Ville Syrjälä Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_irq.c | 63 ++++++++++++++++++--------------- 1 file changed, 35 insertions(+), 28 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index ef9fce50530d..64c79a0cb570 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2028,7 +2028,13 @@ static void ironlake_irq_preinstall(struct drm_device *dev) /* south display irq */ I915_WRITE(SDEIMR, 0xffffffff); - I915_WRITE(SDEIER, 0x0); + /* + * SDEIER is also touched by the interrupt handler to work around missed + * PCH interrupts. Hence we can't update it after the interrupt handler + * is enabled - instead we unconditionally enable all PCH interrupt + * sources here, but then only unmask them as needed with SDEIMR. + */ + I915_WRITE(SDEIER, 0xffffffff); POSTING_READ(SDEIER); } @@ -2064,18 +2070,30 @@ static void valleyview_irq_preinstall(struct drm_device *dev) POSTING_READ(VLV_IER); } -/* - * Enable digital hotplug on the PCH, and configure the DP short pulse - * duration to 2ms (which is the minimum in the Display Port spec) - * - * This register is the same on all known PCH chips. - */ - -static void ibx_enable_hotplug(struct drm_device *dev) +static void ibx_hpd_irq_setup(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 hotplug; + struct drm_mode_config *mode_config = &dev->mode_config; + struct intel_encoder *intel_encoder; + u32 mask = ~I915_READ(SDEIMR); + u32 hotplug; + + if (HAS_PCH_IBX(dev)) { + list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head) + mask |= hpd_ibx[intel_encoder->hpd_pin]; + } else { + list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head) + mask |= hpd_cpt[intel_encoder->hpd_pin]; + } + I915_WRITE(SDEIMR, ~mask); + + /* + * Enable digital hotplug on the PCH, and configure the DP short pulse + * duration to 2ms (which is the minimum in the Display Port spec) + * + * This register is the same on all known PCH chips. + */ hotplug = I915_READ(PCH_PORT_HOTPLUG); hotplug &= ~(PORTD_PULSE_DURATION_MASK|PORTC_PULSE_DURATION_MASK|PORTB_PULSE_DURATION_MASK); hotplug |= PORTD_HOTPLUG_ENABLE | PORTD_PULSE_DURATION_2ms; @@ -2087,27 +2105,14 @@ static void ibx_enable_hotplug(struct drm_device *dev) static void ibx_irq_postinstall(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - struct drm_mode_config *mode_config = &dev->mode_config; - struct intel_encoder *intel_encoder; - u32 mask = I915_READ(SDEIER); + u32 mask; - if (HAS_PCH_IBX(dev)) { - mask &= ~SDE_HOTPLUG_MASK; - list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head) - mask |= hpd_ibx[intel_encoder->hpd_pin]; - mask |= SDE_GMBUS | SDE_AUX_MASK; - } else { - mask &= ~SDE_HOTPLUG_MASK_CPT; - list_for_each_entry(intel_encoder, &mode_config->encoder_list, base.head) - mask |= hpd_cpt[intel_encoder->hpd_pin]; - mask |= SDE_GMBUS_CPT | SDE_AUX_MASK_CPT; - } + if (HAS_PCH_IBX(dev)) + mask = SDE_GMBUS | SDE_AUX_MASK; + else + mask = SDE_GMBUS_CPT | SDE_AUX_MASK_CPT; I915_WRITE(SDEIIR, I915_READ(SDEIIR)); I915_WRITE(SDEIMR, ~mask); - I915_WRITE(SDEIER, mask); - POSTING_READ(SDEIER); - - ibx_enable_hotplug(dev); } static int ironlake_irq_postinstall(struct drm_device *dev) @@ -2977,6 +2982,7 @@ void intel_irq_init(struct drm_device *dev) dev->driver->irq_uninstall = ironlake_irq_uninstall; dev->driver->enable_vblank = ivybridge_enable_vblank; dev->driver->disable_vblank = ivybridge_disable_vblank; + dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup; } else if (HAS_PCH_SPLIT(dev)) { dev->driver->irq_handler = ironlake_irq_handler; dev->driver->irq_preinstall = ironlake_irq_preinstall; @@ -2984,6 +2990,7 @@ void intel_irq_init(struct drm_device *dev) dev->driver->irq_uninstall = ironlake_irq_uninstall; dev->driver->enable_vblank = ironlake_enable_vblank; dev->driver->disable_vblank = ironlake_disable_vblank; + dev_priv->display.hpd_irq_setup = ibx_hpd_irq_setup; } else { if (INTEL_INFO(dev)->gen == 2) { dev->driver->irq_preinstall = i8xx_irq_preinstall; -- 2.20.1