From 825a84d1d3d612c2b8db77dd4719882690d01bae Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 19 Nov 2008 22:14:17 -0800 Subject: [PATCH] atlx: convert to net_device_ops Convert this driver to network device ops. Compile tested only. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 28 ++++++++++++++++------------ drivers/net/atlx/atl2.c | 33 +++++++++++++++++---------------- 2 files changed, 33 insertions(+), 28 deletions(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 611a86ebe164..7a0fb04e3480 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -2880,6 +2880,21 @@ static void atl1_poll_controller(struct net_device *netdev) } #endif +static const struct net_device_ops atl1_netdev_ops = { + .ndo_open = atl1_open, + .ndo_stop = atl1_close, + .ndo_set_multicast_list = atlx_set_multi, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = atl1_set_mac, + .ndo_change_mtu = atl1_change_mtu, + .ndo_do_ioctl = atlx_ioctl, + .ndo_tx_timeout = atlx_tx_timeout, + .ndo_vlan_rx_register = atlx_vlan_rx_register, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = atl1_poll_controller, +#endif +}; + /* * atl1_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -2967,20 +2982,9 @@ static int __devinit atl1_probe(struct pci_dev *pdev, adapter->mii.phy_id_mask = 0x1f; adapter->mii.reg_num_mask = 0x1f; - netdev->open = &atl1_open; - netdev->stop = &atl1_close; + netdev->netdev_ops = &atl1_netdev_ops; netdev->hard_start_xmit = &atl1_xmit_frame; - - netdev->set_multicast_list = &atlx_set_multi; - netdev->set_mac_address = &atl1_set_mac; - netdev->change_mtu = &atl1_change_mtu; - netdev->do_ioctl = &atlx_ioctl; - netdev->tx_timeout = &atlx_tx_timeout; netdev->watchdog_timeo = 5 * HZ; -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = atl1_poll_controller; -#endif - netdev->vlan_rx_register = atlx_vlan_rx_register; netdev->ethtool_ops = &atl1_ethtool_ops; adapter->bd_number = cards_found; diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c index 60c9e5375eed..688c21e81a8e 100644 --- a/drivers/net/atlx/atl2.c +++ b/drivers/net/atlx/atl2.c @@ -1311,6 +1311,22 @@ static void atl2_poll_controller(struct net_device *netdev) } #endif + +static const struct net_device_ops atl2_netdev_ops = { + .ndo_open = atl2_open, + .ndo_stop = atl2_close, + .ndo_set_multicast_list = atl2_set_multi, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = atl2_set_mac, + .ndo_change_mtu = atl2_change_mtu, + .ndo_do_ioctl = atl2_ioctl, + .ndo_tx_timeout = atl2_tx_timeout, + .ndo_vlan_rx_register = atl2_vlan_rx_register, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = atl2_poll_controller, +#endif +}; + /* * atl2_probe - Device Initialization Routine * @pdev: PCI device information struct @@ -1384,25 +1400,10 @@ static int __devinit atl2_probe(struct pci_dev *pdev, atl2_setup_pcicmd(pdev); - netdev->open = &atl2_open; - netdev->stop = &atl2_close; netdev->hard_start_xmit = &atl2_xmit_frame; - netdev->set_multicast_list = &atl2_set_multi; - netdev->set_mac_address = &atl2_set_mac; - netdev->change_mtu = &atl2_change_mtu; - netdev->do_ioctl = &atl2_ioctl; + netdev->netdev_ops = &atl2_netdev_ops; atl2_set_ethtool_ops(netdev); - -#ifdef CONFIG_NET_POLL_CONTROLLER - netdev->poll_controller = atl2_poll_controller; -#endif -#ifdef HAVE_TX_TIMEOUT - netdev->tx_timeout = &atl2_tx_timeout; netdev->watchdog_timeo = 5 * HZ; -#endif -#ifdef NETIF_F_HW_VLAN_TX - netdev->vlan_rx_register = atl2_vlan_rx_register; -#endif strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); netdev->mem_start = mmio_start; -- 2.20.1