From 8258b187c2ba91ba1ff276fd0413f5b655824247 Mon Sep 17 00:00:00 2001 From: Patrice Chotard Date: Tue, 28 May 2013 09:29:34 +0200 Subject: [PATCH] ARM: ux500: add ABx500 pinctrl tables This adds pin control tables for the ABx500 (AB8500 and AB8505) PMIC, which also happens to act as a multimedia pin expander on the ux500 platforms. Signed-off-by: Patrice Chotard Acked-by: Lee Jones Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-pins.c | 262 ++++++++++++++++++++++++ 1 file changed, 262 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 3f92308eee36..608606231c78 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include @@ -34,6 +35,11 @@ BIAS(in_pd, PIN_INPUT_PULLDOWN); BIAS(out_hi, PIN_OUTPUT_HIGH); BIAS(out_lo, PIN_OUTPUT_LOW); BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); + +BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0)); +BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1)); +BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0)); + /* These also force them into GPIO mode */ BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED); @@ -97,6 +103,252 @@ BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| #define DB8500_PIN_STATE(pin, conf, dev, state) \ PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf) +#define AB8500_MUX_HOG(group, func) \ + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func) +#define AB8500_PIN_HOG(pin, conf) \ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8500.0", pin, abx500_##conf) + +#define AB8500_MUX_STATE(group, func, dev, state) \ + PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8500.0", group, func) +#define AB8500_PIN_STATE(pin, conf, dev, state) \ + PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8500.0", pin, abx500_##conf) + +#define AB8505_MUX_HOG(group, func) \ + PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8505.0", group, func) +#define AB8505_PIN_HOG(pin, conf) \ + PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8505.0", pin, abx500_##conf) + +#define AB8505_MUX_STATE(group, func, dev, state) \ + PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8505.0", group, func) +#define AB8505_PIN_STATE(pin, conf, dev, state) \ + PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8505.0", pin, abx500_##conf) + +static struct pinctrl_map __initdata ab8500_pinmap[] = { + /* Sysclkreq2 */ + AB8500_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.35", PINCTRL_STATE_DEFAULT), + AB8500_PIN_STATE("GPIO1_T10", in_nopull, "regulator.35", PINCTRL_STATE_DEFAULT), + /* sysclkreq2 disable, mux in gpio configured in input pulldown */ + AB8500_MUX_STATE("gpio1_a_1", "gpio", "regulator.35", PINCTRL_STATE_SLEEP), + AB8500_PIN_STATE("GPIO1_T10", in_pd, "regulator.35", PINCTRL_STATE_SLEEP), + + /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */ + AB8500_MUX_HOG("gpio2_a_1", "gpio"), + AB8500_PIN_HOG("GPIO2_T9", in_pd), + + /* Sysclkreq4 */ + AB8500_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT), + AB8500_PIN_STATE("GPIO3_U9", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT), + /* sysclkreq4 disable, mux in gpio configured in input pulldown */ + AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP), + AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP), + + /* pins 4 is muxed in GPIO, configured in INPUT PULL DOWN */ + AB8500_MUX_HOG("gpio4_a_1", "gpio"), + AB8500_PIN_HOG("GPIO4_W2", in_pd), + + /* + * pins 6,7,8 and 9 are muxed in YCBCR0123 + * configured in INPUT PULL UP + */ + AB8500_MUX_HOG("ycbcr0123_d_1", "ycbcr"), + AB8500_PIN_HOG("GPIO6_Y18", in_nopull), + AB8500_PIN_HOG("GPIO7_AA20", in_nopull), + AB8500_PIN_HOG("GPIO8_W18", in_nopull), + AB8500_PIN_HOG("GPIO9_AA19", in_nopull), + + /* + * pins 10,11,12 and 13 are muxed in GPIO + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio10_d_1", "gpio"), + AB8500_PIN_HOG("GPIO10_U17", in_pd), + + AB8500_MUX_HOG("gpio11_d_1", "gpio"), + AB8500_PIN_HOG("GPIO11_AA18", in_pd), + + AB8500_MUX_HOG("gpio12_d_1", "gpio"), + AB8500_PIN_HOG("GPIO12_U16", in_pd), + + AB8500_MUX_HOG("gpio13_d_1", "gpio"), + AB8500_PIN_HOG("GPIO13_W17", in_pd), + + /* + * pins 14,15 are muxed in PWM1 and PWM2 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("pwmout1_d_1", "pwmout"), + AB8500_PIN_HOG("GPIO14_F14", in_pd), + + AB8500_MUX_HOG("pwmout2_d_1", "pwmout"), + AB8500_PIN_HOG("GPIO15_B17", in_pd), + + /* + * pins 16 is muxed in GPIO + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio16_a_1", "gpio"), + AB8500_PIN_HOG("GPIO14_F14", in_pd), + + /* + * pins 17,18,19 and 20 are muxed in AUDIO interface 1 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("adi1_d_1", "adi1"), + AB8500_PIN_HOG("GPIO17_P5", in_pd), + AB8500_PIN_HOG("GPIO18_R5", in_pd), + AB8500_PIN_HOG("GPIO19_U5", in_pd), + AB8500_PIN_HOG("GPIO20_T5", in_pd), + + /* + * pins 21,22 and 23 are muxed in USB UICC + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("usbuicc_d_1", "usbuicc"), + AB8500_PIN_HOG("GPIO21_H19", in_pd), + AB8500_PIN_HOG("GPIO22_G20", in_pd), + AB8500_PIN_HOG("GPIO23_G19", in_pd), + + /* + * pins 24,25 are muxed in GPIO + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio24_a_1", "gpio"), + AB8500_PIN_HOG("GPIO24_T14", in_pd), + + AB8500_MUX_HOG("gpio25_a_1", "gpio"), + AB8500_PIN_HOG("GPIO25_R16", in_pd), + + /* + * pins 26 is muxed in GPIO + * configured in OUTPUT LOW + */ + AB8500_MUX_HOG("gpio26_d_1", "gpio"), + AB8500_PIN_HOG("GPIO26_M16", out_lo), + + /* + * pins 27,28 are muxed in DMIC12 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("dmic12_d_1", "dmic"), + AB8500_PIN_HOG("GPIO27_J6", in_pd), + AB8500_PIN_HOG("GPIO28_K6", in_pd), + + /* + * pins 29,30 are muxed in DMIC34 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("dmic34_d_1", "dmic"), + AB8500_PIN_HOG("GPIO29_G6", in_pd), + AB8500_PIN_HOG("GPIO30_H6", in_pd), + + /* + * pins 31,32 are muxed in DMIC56 + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("dmic56_d_1", "dmic"), + AB8500_PIN_HOG("GPIO31_F5", in_pd), + AB8500_PIN_HOG("GPIO32_G5", in_pd), + + /* + * pins 34 is muxed in EXTCPENA + * configured INPUT PULL DOWN + */ + AB8500_MUX_HOG("extcpena_d_1", "extcpena"), + AB8500_PIN_HOG("GPIO34_R17", in_pd), + + /* + * pins 35 is muxed in GPIO + * configured in OUTPUT LOW + */ + AB8500_MUX_HOG("gpio35_d_1", "gpio"), + AB8500_PIN_HOG("GPIO35_W15", in_pd), + + /* + * pins 36,37,38 and 39 are muxed in GPIO + * configured in INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio36_a_1", "gpio"), + AB8500_PIN_HOG("GPIO36_A17", in_pd), + + AB8500_MUX_HOG("gpio37_a_1", "gpio"), + AB8500_PIN_HOG("GPIO37_E15", in_pd), + + AB8500_MUX_HOG("gpio38_a_1", "gpio"), + AB8500_PIN_HOG("GPIO38_C17", in_pd), + + AB8500_MUX_HOG("gpio39_a_1", "gpio"), + AB8500_PIN_HOG("GPIO39_E16", in_pd), + + /* + * pins 40 and 41 are muxed in MODCSLSDA + * configured INPUT PULL DOWN + */ + AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"), + AB8500_PIN_HOG("GPIO40_T19", in_pd), + AB8500_PIN_HOG("GPIO41_U19", in_pd), + + /* + * pins 42 is muxed in GPIO + * configured INPUT PULL DOWN + */ + AB8500_MUX_HOG("gpio42_a_1", "gpio"), + AB8500_PIN_HOG("GPIO42_U2", in_pd), +}; + +static struct pinctrl_map __initdata ab8505_pinmap[] = { + /* Sysclkreq2 */ + AB8505_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT), + AB8505_PIN_STATE("GPIO1_N4", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT), + /* sysclkreq2 disable, mux in gpio configured in input pulldown */ + AB8505_MUX_STATE("gpio1_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP), + AB8505_PIN_STATE("GPIO1_N4", in_pd, "regulator.36", PINCTRL_STATE_SLEEP), + + /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */ + AB8505_MUX_HOG("gpio2_a_1", "gpio"), + AB8505_PIN_HOG("GPIO2_R5", in_pd), + + /* Sysclkreq4 */ + AB8505_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.37", PINCTRL_STATE_DEFAULT), + AB8505_PIN_STATE("GPIO3_P5", in_nopull, "regulator.37", PINCTRL_STATE_DEFAULT), + /* sysclkreq4 disable, mux in gpio configured in input pulldown */ + AB8505_MUX_STATE("gpio3_a_1", "gpio", "regulator.37", PINCTRL_STATE_SLEEP), + AB8505_PIN_STATE("GPIO3_P5", in_pd, "regulator.37", PINCTRL_STATE_SLEEP), + + AB8505_MUX_HOG("gpio10_d_1", "gpio"), + AB8505_PIN_HOG("GPIO10_B16", in_pd), + + AB8505_MUX_HOG("gpio11_d_1", "gpio"), + AB8505_PIN_HOG("GPIO11_B17", in_pd), + + AB8505_MUX_HOG("gpio13_d_1", "gpio"), + AB8505_PIN_HOG("GPIO13_D17", in_nopull), + + AB8505_MUX_HOG("pwmout1_d_1", "pwmout"), + AB8505_PIN_HOG("GPIO14_C16", in_pd), + + AB8505_MUX_HOG("adi2_d_1", "adi2"), + AB8505_PIN_HOG("GPIO17_P2", in_pd), + AB8505_PIN_HOG("GPIO18_N3", in_pd), + AB8505_PIN_HOG("GPIO19_T1", in_pd), + AB8505_PIN_HOG("GPIO20_P3", in_pd), + + AB8505_MUX_HOG("gpio34_a_1", "gpio"), + AB8505_PIN_HOG("GPIO34_H14", in_pd), + + AB8505_MUX_HOG("modsclsda_d_1", "modsclsda"), + AB8505_PIN_HOG("GPIO40_J15", in_pd), + AB8505_PIN_HOG("GPIO41_J14", in_pd), + + AB8505_MUX_HOG("gpio50_d_1", "gpio"), + AB8505_PIN_HOG("GPIO50_L4", in_nopull), + + AB8505_MUX_HOG("resethw_d_1", "resethw"), + AB8505_PIN_HOG("GPIO52_D16", in_pd), + + AB8505_MUX_HOG("service_d_1", "service"), + AB8505_PIN_HOG("GPIO53_D15", in_pd), +}; + /* Pin control settings */ static struct pinctrl_map __initdata mop500_family_pinmap[] = { /* @@ -816,6 +1068,12 @@ void __init mop500_pinmaps_init(void) pinctrl_register_mappings(mop500_pinmap, ARRAY_SIZE(mop500_pinmap)); mop500_href_family_pinmaps_init(); + if (machine_is_u8520()) + pinctrl_register_mappings(ab8505_pinmap, + ARRAY_SIZE(ab8505_pinmap)); + else + pinctrl_register_mappings(ab8500_pinmap, + ARRAY_SIZE(ab8500_pinmap)); } void __init snowball_pinmaps_init(void) @@ -826,6 +1084,8 @@ void __init snowball_pinmaps_init(void) ARRAY_SIZE(snowball_pinmap)); pinctrl_register_mappings(u8500_pinmap, ARRAY_SIZE(u8500_pinmap)); + pinctrl_register_mappings(ab8500_pinmap, + ARRAY_SIZE(ab8500_pinmap)); } void __init hrefv60_pinmaps_init(void) @@ -835,4 +1095,6 @@ void __init hrefv60_pinmaps_init(void) pinctrl_register_mappings(hrefv60_pinmap, ARRAY_SIZE(hrefv60_pinmap)); mop500_href_family_pinmaps_init(); + pinctrl_register_mappings(ab8500_pinmap, + ARRAY_SIZE(ab8500_pinmap)); } -- 2.20.1