From 81dc67601a49d1bfcfa85f644b14a013fc59e0ef Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 17 Jun 2011 11:07:32 +0530 Subject: [PATCH] ath9k: Fix a corner case failure in sending PAPRD frames in HT40 when the AP is configured with HT40/2.4GHz and when PAPRD is enabled in station we have PAPRD training frames never sent out because of the following failure "PAPRD target power delta out of range". This consistently happens in channel 10,11 in Over The Air testing and rarely in channel 6 under wired setup. the reason behind this issue is all the HT40 rates target power are 0 when we operate in channel 10/11 at 2.4GHz Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index ff8150e46f0e..2e370c668d4e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -1461,7 +1461,7 @@ static const struct ar9300_eeprom ar9300_h112 = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, @@ -2616,7 +2616,7 @@ static const struct ar9300_eeprom ar9300_h116 = { { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, - { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } }, + { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, -- 2.20.1