From 81ccb2a69f76b88295a1da9fc9484df715fe3bfa Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 31 Jul 2015 10:58:27 +0200 Subject: [PATCH] serial: samsung: fix DMA mode enter condition for small FIFO sizes Due to some of serial ports can have FIFO size smaller than cache line size, and because of need to align DMA buffer address to cache line size, it's necessary to calculate minimum number of bytes for which we want to start DMA transaction to be at least cache line size. The simplest way to meet this requirement is to get maximum of cache line size and FIFO size. Cc: # v3.18+ Reported-by: Krzysztof Kozlowski Signed-off-by: Marek Szyprowski Signed-off-by: Robert Baldyga Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 13 +++++++++++-- drivers/tty/serial/samsung.h | 1 + 2 files changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 8c963d6d9074..faee021c27b0 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -341,7 +341,8 @@ static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport) return; } - if (!ourport->dma || !ourport->dma->tx_chan || count < port->fifosize) + if (!ourport->dma || !ourport->dma->tx_chan || + count < ourport->min_dma_size) s3c24xx_serial_start_tx_pio(ourport); else s3c24xx_serial_start_tx_dma(ourport, count); @@ -741,7 +742,8 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id) count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE); - if (ourport->dma && ourport->dma->tx_chan && count >= port->fifosize) { + if (ourport->dma && ourport->dma->tx_chan && + count >= ourport->min_dma_size) { s3c24xx_serial_start_tx_dma(ourport, count); goto out; } @@ -1837,6 +1839,13 @@ static int s3c24xx_serial_probe(struct platform_device *pdev) else if (ourport->info->fifosize) ourport->port.fifosize = ourport->info->fifosize; + /* + * DMA transfers must be aligned at least to cache line size, + * so find minimal transfer size suitable for DMA mode + */ + ourport->min_dma_size = max_t(int, ourport->port.fifosize, + dma_get_cache_alignment()); + probe_index++; dbg("%s: initialising port %p...\n", __func__, ourport); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h index d275032aa68d..fc5deaa4f382 100644 --- a/drivers/tty/serial/samsung.h +++ b/drivers/tty/serial/samsung.h @@ -82,6 +82,7 @@ struct s3c24xx_uart_port { unsigned char tx_claimed; unsigned int pm_level; unsigned long baudclk_rate; + unsigned int min_dma_size; unsigned int rx_irq; unsigned int tx_irq; -- 2.20.1