From 81a0a8bc380d847fc62605c27067b5c1d025bea2 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Beno=C3=AEt=20Th=C3=A9baudeau?= Date: Tue, 30 May 2017 11:14:09 +0200 Subject: [PATCH] mmc: sdhci-esdhc-imx: Fix DAT line software reset MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit On i.MX25, the eSDHC DAT line software reset (SYSCTL.RSTD) unexpectedly clears at least the data transfer width (PROCTL.DTW), which then results in data CRC errors. This behavior is not documented, but it has actually been observed. Consequently, the DAT line software resets triggered by sdhci.c in case of errors caused unrecoverable errors. Fix this by making sure that the DAT line software reset does not alter the Host Control register. This behavior being undocumented, it may also be present on other i.MX SoCs, so apply this fix for the whole i.MX family. Signed-off-by: Benoît Thébaudeau Acked-by: Adrian Hunter Reviewed-by: Fabio Estevam Signed-off-by: Ulf Hansson --- drivers/mmc/host/sdhci-esdhc-imx.c | 59 +++++++++++++++++++----------- 1 file changed, 38 insertions(+), 21 deletions(-) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4dbc5c06f208..790e7b2c02af 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -579,7 +579,7 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) { struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct pltfm_imx_data *imx_data = sdhci_pltfm_priv(pltfm_host); - u32 new_val; + u32 new_val = 0; u32 mask; switch (reg) { @@ -610,29 +610,46 @@ static void esdhc_writeb_le(struct sdhci_host *host, u8 val, int reg) esdhc_clrset_le(host, mask, new_val, reg); return; + case SDHCI_SOFTWARE_RESET: + if (val & SDHCI_RESET_DATA) + new_val = readl(host->ioaddr + SDHCI_HOST_CONTROL); + break; } esdhc_clrset_le(host, 0xff, val, reg); - /* - * The esdhc has a design violation to SDHC spec which tells - * that software reset should not affect card detection circuit. - * But esdhc clears its SYSCTL register bits [0..2] during the - * software reset. This will stop those clocks that card detection - * circuit relies on. To work around it, we turn the clocks on back - * to keep card detection circuit functional. - */ - if ((reg == SDHCI_SOFTWARE_RESET) && (val & 1)) { - esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL); - /* - * The reset on usdhc fails to clear MIX_CTRL register. - * Do it manually here. - */ - if (esdhc_is_usdhc(imx_data)) { - /* the tuning bits should be kept during reset */ - new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); - writel(new_val & ESDHC_MIX_CTRL_TUNING_MASK, - host->ioaddr + ESDHC_MIX_CTRL); - imx_data->is_ddr = 0; + if (reg == SDHCI_SOFTWARE_RESET) { + if (val & SDHCI_RESET_ALL) { + /* + * The esdhc has a design violation to SDHC spec which + * tells that software reset should not affect card + * detection circuit. But esdhc clears its SYSCTL + * register bits [0..2] during the software reset. This + * will stop those clocks that card detection circuit + * relies on. To work around it, we turn the clocks on + * back to keep card detection circuit functional. + */ + esdhc_clrset_le(host, 0x7, 0x7, ESDHC_SYSTEM_CONTROL); + /* + * The reset on usdhc fails to clear MIX_CTRL register. + * Do it manually here. + */ + if (esdhc_is_usdhc(imx_data)) { + /* + * the tuning bits should be kept during reset + */ + new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); + writel(new_val & ESDHC_MIX_CTRL_TUNING_MASK, + host->ioaddr + ESDHC_MIX_CTRL); + imx_data->is_ddr = 0; + } + } else if (val & SDHCI_RESET_DATA) { + /* + * The eSDHC DAT line software reset clears at least the + * data transfer width on i.MX25, so make sure that the + * Host Control register is unaffected. + */ + esdhc_clrset_le(host, 0xff, new_val, + SDHCI_HOST_CONTROL); } } } -- 2.20.1