From 8117bd531501ec329e4c9ea96fb7f9d5504c82f5 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 19 Aug 2014 14:00:01 +0300 Subject: [PATCH] gpio-lynxpoint: enable input sensing in resume It appears that input sensing bit might be reset during suspend/resume. Set input sensing again for all requested gpios in resume Tested-by: Jerome Blin Signed-off-by: Mathias Nyman Acked-by: Mika Westerberg Signed-off-by: Linus Walleij --- drivers/gpio/gpio-lynxpoint.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/gpio/gpio-lynxpoint.c b/drivers/gpio/gpio-lynxpoint.c index ff9eb911b5e4..fa945ec9ccff 100644 --- a/drivers/gpio/gpio-lynxpoint.c +++ b/drivers/gpio/gpio-lynxpoint.c @@ -407,9 +407,27 @@ static int lp_gpio_runtime_resume(struct device *dev) return 0; } +static int lp_gpio_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct lp_gpio *lg = platform_get_drvdata(pdev); + unsigned long reg; + int i; + + /* on some hardware suspend clears input sensing, re-enable it here */ + for (i = 0; i < lg->chip.ngpio; i++) { + if (gpiochip_is_requested(&lg->chip, i) != NULL) { + reg = lp_gpio_reg(&lg->chip, i, LP_CONFIG2); + outl(inl(reg) & ~GPINDIS_BIT, reg); + } + } + return 0; +} + static const struct dev_pm_ops lp_gpio_pm_ops = { .runtime_suspend = lp_gpio_runtime_suspend, .runtime_resume = lp_gpio_runtime_resume, + .resume = lp_gpio_resume, }; static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = { -- 2.20.1