From 8061f5f0a04cfd2bc7aa273596ad3fcd426f8eea Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 5 Mar 2006 15:29:09 +0900 Subject: [PATCH] [PATCH] libata: convert pio_task and packet_task to port_task Make pio_task and atapi_packet_task use port_task. atapi_packet_task() is moved upward such that it's right after ata_pio_task(). This position is more natural and makes adding prototype for ata_qc_issue_prot() unnecessary. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 154 ++++++++++++++++++------------------- 1 file changed, 77 insertions(+), 77 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index d59d462130c..16a108d2f9a 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3709,11 +3709,83 @@ fsm_start: } if (timeout) - ata_queue_delayed_pio_task(ap, timeout); + ata_port_queue_task(ap, ata_pio_task, ap, timeout); else if (!qc_completed) goto fsm_start; } +/** + * atapi_packet_task - Write CDB bytes to hardware + * @_data: Port to which ATAPI device is attached. + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * If DMA is to be performed, exit immediately. + * Otherwise, we are in polling mode, so poll + * status under operation succeeds or fails. + * + * LOCKING: + * Kernel thread context (may sleep) + */ + +static void atapi_packet_task(void *_data) +{ + struct ata_port *ap = _data; + struct ata_queued_cmd *qc; + u8 status; + + qc = ata_qc_from_tag(ap, ap->active_tag); + WARN_ON(qc == NULL); + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); + + /* sleep-wait for BSY to clear */ + DPRINTK("busy wait\n"); + if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { + qc->err_mask |= AC_ERR_TIMEOUT; + goto err_out; + } + + /* make sure DRQ is set */ + status = ata_chk_status(ap); + if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { + qc->err_mask |= AC_ERR_HSM; + goto err_out; + } + + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + WARN_ON(qc->dev->cdb_len < 12); + + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { + unsigned long flags; + + /* Once we're done issuing command and kicking bmdma, + * irq handler takes over. To not lose irq, we need + * to clear NOINTR flag before sending cdb, but + * interrupt handler shouldn't be invoked before we're + * finished. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_NOINTR; + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); + if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) + ap->ops->bmdma_start(qc); /* initiate bmdma */ + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); + + /* PIO commands are handled by polling */ + ap->hsm_task_state = HSM_ST; + ata_port_queue_task(ap, ata_pio_task, ap, 0); + } + + return; + +err_out: + ata_poll_qc_complete(qc); +} + /** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out @@ -4013,26 +4085,26 @@ unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); ap->hsm_task_state = HSM_ST; - ata_queue_pio_task(ap); + ata_port_queue_task(ap, ata_pio_task, ap, 0); break; case ATA_PROT_ATAPI: ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); - ata_queue_packet_task(ap); + ata_port_queue_task(ap, atapi_packet_task, ap, 0); break; case ATA_PROT_ATAPI_NODATA: ap->flags |= ATA_FLAG_NOINTR; ata_tf_to_host(ap, &qc->tf); - ata_queue_packet_task(ap); + ata_port_queue_task(ap, atapi_packet_task, ap, 0); break; case ATA_PROT_ATAPI_DMA: ap->flags |= ATA_FLAG_NOINTR; ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ - ata_queue_packet_task(ap); + ata_port_queue_task(ap, atapi_packet_task, ap, 0); break; default: @@ -4400,78 +4472,6 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_RETVAL(handled); } -/** - * atapi_packet_task - Write CDB bytes to hardware - * @_data: Port to which ATAPI device is attached. - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * If DMA is to be performed, exit immediately. - * Otherwise, we are in polling mode, so poll - * status under operation succeeds or fails. - * - * LOCKING: - * Kernel thread context (may sleep) - */ - -static void atapi_packet_task(void *_data) -{ - struct ata_port *ap = _data; - struct ata_queued_cmd *qc; - u8 status; - - qc = ata_qc_from_tag(ap, ap->active_tag); - WARN_ON(qc == NULL); - WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); - - /* sleep-wait for BSY to clear */ - DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { - qc->err_mask |= AC_ERR_TIMEOUT; - goto err_out; - } - - /* make sure DRQ is set */ - status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { - qc->err_mask |= AC_ERR_HSM; - goto err_out; - } - - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - WARN_ON(qc->dev->cdb_len < 12); - - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - unsigned long flags; - - /* Once we're done issuing command and kicking bmdma, - * irq handler takes over. To not lose irq, we need - * to clear NOINTR flag before sending cdb, but - * interrupt handler shouldn't be invoked before we're - * finished. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; - ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ - spin_unlock_irqrestore(&ap->host_set->lock, flags); - } else { - ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); - - /* PIO commands are handled by polling */ - ap->hsm_task_state = HSM_ST; - ata_queue_pio_task(ap); - } - - return; - -err_out: - ata_poll_qc_complete(qc); -} - /* * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, -- 2.20.1