From 7f72134c32eb64c77d1fb35123ba8bf815bf797c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 12 Jun 2009 17:58:30 +0200 Subject: [PATCH] atmel-mci: add MCI2 register definitions New revision of Atmel MCI interface adds new features. This is a update of register definition in header file. This new MCI IP is called MCI2. Signed-off-by: Nicolas Ferre Acked-by: Haavard Skinnemoen Signed-off-by: Pierre Ossman --- drivers/mmc/host/atmel-mci-regs.h | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h index adfb885db60f..fc8a0fe7c5c5 100644 --- a/drivers/mmc/host/atmel-mci-regs.h +++ b/drivers/mmc/host/atmel-mci-regs.h @@ -10,6 +10,7 @@ /* * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors + * Registers and bitfields marked with [2] are only available in MCI2 */ #ifndef __DRIVERS_MMC_ATMEL_MCI_H__ @@ -39,6 +40,7 @@ # define MCI_SDCSEL_MASK ( 3 << 0) # define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ # define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ +# define MCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */ # define MCI_SDCBUS_MASK ( 3 << 6) #define MCI_ARGR 0x0010 /* Command Argument */ #define MCI_CMDR 0x0014 /* Command */ @@ -67,6 +69,9 @@ #define MCI_BLKR 0x0018 /* Block */ # define MCI_BCNT(x) ((x) << 0) /* Data Block Count */ # define MCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ +#define MCI_CSTOR 0x001c /* Completion Signal Timeout[2] */ +# define MCI_CSTOCYC(x) ((x) << 0) /* CST cycles */ +# define MCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */ #define MCI_RSPR 0x0020 /* Response 0 */ #define MCI_RSPR1 0x0024 /* Response 1 */ #define MCI_RSPR2 0x0028 /* Response 2 */ @@ -94,7 +99,24 @@ # define MCI_DTOE ( 1 << 22) /* Data Time-Out Error */ # define MCI_OVRE ( 1 << 30) /* RX Overrun Error */ # define MCI_UNRE ( 1 << 31) /* TX Underrun Error */ +#define MCI_DMA 0x0050 /* DMA Configuration[2] */ +# define MCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */ +# define MCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */ +# define MCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */ +#define MCI_CFG 0x0054 /* Configuration[2] */ +# define MCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */ +# define MCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */ +# define MCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */ +# define MCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */ +#define MCI_WPMR 0x00e4 /* Write Protection Mode[2] */ +# define MCI_WP_EN ( 1 << 0) /* WP Enable */ +# define MCI_WP_KEY (0x4d4349 << 8) /* WP Key */ +#define MCI_WPSR 0x00e8 /* Write Protection Status[2] */ +# define MCI_GET_WP_VS(x) ((x) & 0x0f) +# define MCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff) +#define MCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */ +/* This is not including the FIFO Aperture on MCI2 */ #define MCI_REGS_SIZE 0x100 /* Register access macros */ -- 2.20.1