From 7eadd47fd708df2028877558d085f47dc9086459 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 28 Aug 2015 14:45:21 +0200 Subject: [PATCH] mtd: sunxi_nand: Select the chip in sunxi_nand_chip_init_timings() nand_scan_ident() leaves the chip deselected. So just issuing some commands from the sunxi driver does not work. We need to select the chip before writing the commands to the NAND device. This patch takes care of this. Set the new timing on all dies implemented as suggested by Boris. This was detected on the in-circuit ICnova-A20 SoM equipped with the Micron MT29F32G08CBACAWP (4GiB) ONFI NAND device. Signed-off-by: Stefan Roese Cc: Hans de Goede Cc: Maxime Ripard Cc: Roy Spliet Acked-by: Boris Brezillon [Brian: fixup whitespace] Signed-off-by: Brian Norris --- drivers/mtd/nand/sunxi_nand.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index f97a58d6aae1..4e586bc758a6 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -978,17 +978,23 @@ static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip, mode = chip->nand.onfi_timing_mode_default; } else { uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; + int i; mode = fls(mode) - 1; if (mode < 0) mode = 0; feature[0] = mode; - ret = chip->nand.onfi_set_features(&chip->mtd, &chip->nand, + for (i = 0; i < chip->nsels; i++) { + chip->nand.select_chip(&chip->mtd, i); + ret = chip->nand.onfi_set_features(&chip->mtd, + &chip->nand, ONFI_FEATURE_ADDR_TIMING_MODE, feature); - if (ret) - return ret; + chip->nand.select_chip(&chip->mtd, -1); + if (ret) + return ret; + } } timings = onfi_async_timing_mode_to_sdr_timings(mode); -- 2.20.1