From 7e937c633f718e0916a294db7282c922c1bf3ce3 Mon Sep 17 00:00:00 2001 From: Albert Herranz Date: Wed, 7 Oct 2009 00:07:44 +0200 Subject: [PATCH] b43: do not stack-allocate pio rx/tx header and tail buffers The DMA-API debugging facility complains about b43 mapping memory from stack for SDIO-based cards. Indeed, b43 currently allocates the PIO RX/TX header and tail buffers from stack. The solution here is to use heap-allocated buffers instead. Signed-off-by: Albert Herranz Signed-off-by: John W. Linville --- drivers/net/wireless/b43/b43.h | 168 +++++++++++++++++--------------- drivers/net/wireless/b43/pio.c | 78 +++++++-------- drivers/net/wireless/b43/xmit.c | 2 +- 3 files changed, 132 insertions(+), 116 deletions(-) diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index fa1549a03c71..660716214d49 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -607,82 +607,7 @@ struct b43_qos_params { struct ieee80211_tx_queue_params p; }; -struct b43_wldev; - -/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */ -struct b43_wl { - /* Pointer to the active wireless device on this chip */ - struct b43_wldev *current_dev; - /* Pointer to the ieee80211 hardware data structure */ - struct ieee80211_hw *hw; - - /* Global driver mutex. Every operation must run with this mutex locked. */ - struct mutex mutex; - /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ - * handler, only. This basically is just the IRQ mask register. */ - spinlock_t hardirq_lock; - - /* The number of queues that were registered with the mac80211 subsystem - * initially. This is a backup copy of hw->queues in case hw->queues has - * to be dynamically lowered at runtime (Firmware does not support QoS). - * hw->queues has to be restored to the original value before unregistering - * from the mac80211 subsystem. */ - u16 mac80211_initially_registered_queues; - - /* We can only have one operating interface (802.11 core) - * at a time. General information about this interface follows. - */ - - struct ieee80211_vif *vif; - /* The MAC address of the operating interface. */ - u8 mac_addr[ETH_ALEN]; - /* Current BSSID */ - u8 bssid[ETH_ALEN]; - /* Interface type. (NL80211_IFTYPE_XXX) */ - int if_type; - /* Is the card operating in AP, STA or IBSS mode? */ - bool operating; - /* filter flags */ - unsigned int filter_flags; - /* Stats about the wireless interface */ - struct ieee80211_low_level_stats ieee_stats; - -#ifdef CONFIG_B43_HWRNG - struct hwrng rng; - bool rng_initialized; - char rng_name[30 + 1]; -#endif /* CONFIG_B43_HWRNG */ - - /* List of all wireless devices on this chip */ - struct list_head devlist; - u8 nr_devs; - - bool radiotap_enabled; - bool radio_enabled; - - /* The beacon we are currently using (AP or IBSS mode). */ - struct sk_buff *current_beacon; - bool beacon0_uploaded; - bool beacon1_uploaded; - bool beacon_templates_virgin; /* Never wrote the templates? */ - struct work_struct beacon_update_trigger; - - /* The current QOS parameters for the 4 queues. */ - struct b43_qos_params qos_params[4]; - - /* Work for adjustment of the transmission power. - * This is scheduled when we determine that the actual TX output - * power doesn't match what we want. */ - struct work_struct txpower_adjust_work; - - /* Packet transmit work */ - struct work_struct tx_work; - /* Queue of packets to be transmitted. */ - struct sk_buff_head tx_queue; - - /* The device LEDs. */ - struct b43_leds leds; -}; +struct b43_wl; /* The type of the firmware file. */ enum b43_firmware_file_type { @@ -824,6 +749,97 @@ struct b43_wldev { #endif }; +/* + * Include goes here to avoid a dependency problem. + * A better fix would be to integrate xmit.h into b43.h. + */ +#include "xmit.h" + +/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */ +struct b43_wl { + /* Pointer to the active wireless device on this chip */ + struct b43_wldev *current_dev; + /* Pointer to the ieee80211 hardware data structure */ + struct ieee80211_hw *hw; + + /* Global driver mutex. Every operation must run with this mutex locked. */ + struct mutex mutex; + /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ + * handler, only. This basically is just the IRQ mask register. */ + spinlock_t hardirq_lock; + + /* The number of queues that were registered with the mac80211 subsystem + * initially. This is a backup copy of hw->queues in case hw->queues has + * to be dynamically lowered at runtime (Firmware does not support QoS). + * hw->queues has to be restored to the original value before unregistering + * from the mac80211 subsystem. */ + u16 mac80211_initially_registered_queues; + + /* We can only have one operating interface (802.11 core) + * at a time. General information about this interface follows. + */ + + struct ieee80211_vif *vif; + /* The MAC address of the operating interface. */ + u8 mac_addr[ETH_ALEN]; + /* Current BSSID */ + u8 bssid[ETH_ALEN]; + /* Interface type. (NL80211_IFTYPE_XXX) */ + int if_type; + /* Is the card operating in AP, STA or IBSS mode? */ + bool operating; + /* filter flags */ + unsigned int filter_flags; + /* Stats about the wireless interface */ + struct ieee80211_low_level_stats ieee_stats; + +#ifdef CONFIG_B43_HWRNG + struct hwrng rng; + bool rng_initialized; + char rng_name[30 + 1]; +#endif /* CONFIG_B43_HWRNG */ + + /* List of all wireless devices on this chip */ + struct list_head devlist; + u8 nr_devs; + + bool radiotap_enabled; + bool radio_enabled; + + /* The beacon we are currently using (AP or IBSS mode). */ + struct sk_buff *current_beacon; + bool beacon0_uploaded; + bool beacon1_uploaded; + bool beacon_templates_virgin; /* Never wrote the templates? */ + struct work_struct beacon_update_trigger; + + /* The current QOS parameters for the 4 queues. */ + struct b43_qos_params qos_params[4]; + + /* Work for adjustment of the transmission power. + * This is scheduled when we determine that the actual TX output + * power doesn't match what we want. */ + struct work_struct txpower_adjust_work; + + /* Packet transmit work */ + struct work_struct tx_work; + /* Queue of packets to be transmitted. */ + struct sk_buff_head tx_queue; + + /* The device LEDs. */ + struct b43_leds leds; + +#ifdef CONFIG_B43_PIO + /* + * RX/TX header/tail buffers used by the frame transmit functions. + */ + struct b43_rxhdr_fw4 rxhdr; + struct b43_txhdr txhdr; + u8 rx_tail[4]; + u8 tx_tail[4]; +#endif /* CONFIG_B43_PIO */ +}; + static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw) { return hw->priv; diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c index 9c1397996e0a..dbbf0d11e18e 100644 --- a/drivers/net/wireless/b43/pio.c +++ b/drivers/net/wireless/b43/pio.c @@ -331,6 +331,7 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q, unsigned int data_len) { struct b43_wldev *dev = q->dev; + struct b43_wl *wl = dev->wl; const u8 *data = _data; ctl |= B43_PIO_TXCTL_WRITELO | B43_PIO_TXCTL_WRITEHI; @@ -340,13 +341,12 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q, q->mmio_base + B43_PIO_TXDATA, sizeof(u16)); if (data_len & 1) { - u8 tail[2] = { 0, }; - /* Write the last byte. */ ctl &= ~B43_PIO_TXCTL_WRITEHI; b43_piotx_write16(q, B43_PIO_TXCTL, ctl); - tail[0] = data[data_len - 1]; - ssb_block_write(dev->dev, tail, 2, + wl->tx_tail[0] = data[data_len - 1]; + wl->tx_tail[1] = 0; + ssb_block_write(dev->dev, wl->tx_tail, 2, q->mmio_base + B43_PIO_TXDATA, sizeof(u16)); } @@ -381,6 +381,7 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q, unsigned int data_len) { struct b43_wldev *dev = q->dev; + struct b43_wl *wl = dev->wl; const u8 *data = _data; ctl |= B43_PIO8_TXCTL_0_7 | B43_PIO8_TXCTL_8_15 | @@ -391,29 +392,31 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q, q->mmio_base + B43_PIO8_TXDATA, sizeof(u32)); if (data_len & 3) { - u8 tail[4] = { 0, }; - + wl->tx_tail[3] = 0; /* Write the last few bytes. */ ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_24_31); switch (data_len & 3) { case 3: ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15; - tail[0] = data[data_len - 3]; - tail[1] = data[data_len - 2]; - tail[2] = data[data_len - 1]; + wl->tx_tail[0] = data[data_len - 3]; + wl->tx_tail[1] = data[data_len - 2]; + wl->tx_tail[2] = data[data_len - 1]; break; case 2: ctl |= B43_PIO8_TXCTL_8_15; - tail[0] = data[data_len - 2]; - tail[1] = data[data_len - 1]; + wl->tx_tail[0] = data[data_len - 2]; + wl->tx_tail[1] = data[data_len - 1]; + wl->tx_tail[2] = 0; break; case 1: - tail[0] = data[data_len - 1]; + wl->tx_tail[0] = data[data_len - 1]; + wl->tx_tail[1] = 0; + wl->tx_tail[2] = 0; break; } b43_piotx_write32(q, B43_PIO8_TXCTL, ctl); - ssb_block_write(dev->dev, tail, 4, + ssb_block_write(dev->dev, wl->tx_tail, 4, q->mmio_base + B43_PIO8_TXDATA, sizeof(u32)); } @@ -445,8 +448,9 @@ static void pio_tx_frame_4byte_queue(struct b43_pio_txpacket *pack, static int pio_tx_frame(struct b43_pio_txqueue *q, struct sk_buff *skb) { + struct b43_wldev *dev = q->dev; + struct b43_wl *wl = dev->wl; struct b43_pio_txpacket *pack; - struct b43_txhdr txhdr; u16 cookie; int err; unsigned int hdrlen; @@ -457,8 +461,8 @@ static int pio_tx_frame(struct b43_pio_txqueue *q, struct b43_pio_txpacket, list); cookie = generate_cookie(q, pack); - hdrlen = b43_txhdr_size(q->dev); - err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb, + hdrlen = b43_txhdr_size(dev); + err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb, info, cookie); if (err) return err; @@ -466,15 +470,15 @@ static int pio_tx_frame(struct b43_pio_txqueue *q, if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) { /* Tell the firmware about the cookie of the last * mcast frame, so it can clear the more-data bit in it. */ - b43_shm_write16(q->dev, B43_SHM_SHARED, + b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_MCASTCOOKIE, cookie); } pack->skb = skb; if (q->rev >= 8) - pio_tx_frame_4byte_queue(pack, (const u8 *)&txhdr, hdrlen); + pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen); else - pio_tx_frame_2byte_queue(pack, (const u8 *)&txhdr, hdrlen); + pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen); /* Remove it from the list of available packet slots. * It will be put back when we receive the status report. */ @@ -614,14 +618,14 @@ void b43_pio_get_tx_stats(struct b43_wldev *dev, static bool pio_rx_frame(struct b43_pio_rxqueue *q) { struct b43_wldev *dev = q->dev; - struct b43_rxhdr_fw4 rxhdr; + struct b43_wl *wl = dev->wl; u16 len; u32 macstat; unsigned int i, padding; struct sk_buff *skb; const char *err_msg = NULL; - memset(&rxhdr, 0, sizeof(rxhdr)); + memset(&wl->rxhdr, 0, sizeof(wl->rxhdr)); /* Check if we have data and wait for it to get ready. */ if (q->rev >= 8) { @@ -659,16 +663,16 @@ data_ready: /* Get the preamble (RX header) */ if (q->rev >= 8) { - ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr), + ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr), q->mmio_base + B43_PIO8_RXDATA, sizeof(u32)); } else { - ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr), + ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr), q->mmio_base + B43_PIO_RXDATA, sizeof(u16)); } /* Sanity checks. */ - len = le16_to_cpu(rxhdr.frame_len); + len = le16_to_cpu(wl->rxhdr.frame_len); if (unlikely(len > 0x700)) { err_msg = "len > 0x700"; goto rx_error; @@ -678,7 +682,7 @@ data_ready: goto rx_error; } - macstat = le32_to_cpu(rxhdr.mac_status); + macstat = le32_to_cpu(wl->rxhdr.mac_status); if (macstat & B43_RX_MAC_FCSERR) { if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) { /* Drop frames with failed FCS. */ @@ -703,24 +707,22 @@ data_ready: q->mmio_base + B43_PIO8_RXDATA, sizeof(u32)); if (len & 3) { - u8 tail[4] = { 0, }; - /* Read the last few bytes. */ - ssb_block_read(dev->dev, tail, 4, + ssb_block_read(dev->dev, wl->rx_tail, 4, q->mmio_base + B43_PIO8_RXDATA, sizeof(u32)); switch (len & 3) { case 3: - skb->data[len + padding - 3] = tail[0]; - skb->data[len + padding - 2] = tail[1]; - skb->data[len + padding - 1] = tail[2]; + skb->data[len + padding - 3] = wl->rx_tail[0]; + skb->data[len + padding - 2] = wl->rx_tail[1]; + skb->data[len + padding - 1] = wl->rx_tail[2]; break; case 2: - skb->data[len + padding - 2] = tail[0]; - skb->data[len + padding - 1] = tail[1]; + skb->data[len + padding - 2] = wl->rx_tail[0]; + skb->data[len + padding - 1] = wl->rx_tail[1]; break; case 1: - skb->data[len + padding - 1] = tail[0]; + skb->data[len + padding - 1] = wl->rx_tail[0]; break; } } @@ -729,17 +731,15 @@ data_ready: q->mmio_base + B43_PIO_RXDATA, sizeof(u16)); if (len & 1) { - u8 tail[2] = { 0, }; - /* Read the last byte. */ - ssb_block_read(dev->dev, tail, 2, + ssb_block_read(dev->dev, wl->rx_tail, 2, q->mmio_base + B43_PIO_RXDATA, sizeof(u16)); - skb->data[len + padding - 1] = tail[0]; + skb->data[len + padding - 1] = wl->rx_tail[0]; } } - b43_rx(q->dev, skb, &rxhdr); + b43_rx(q->dev, skb, &wl->rxhdr); return 1; diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index ac9f600995e4..892573b27d50 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -27,7 +27,7 @@ */ -#include "xmit.h" +#include "b43.h" #include "phy_common.h" #include "dma.h" #include "pio.h" -- 2.20.1