From 7e57fd1444bf8f4ba9179f826ed6817c56b801d4 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Wed, 16 Mar 2016 19:40:33 +0800 Subject: [PATCH] PCI: designware: Move Root Complex setup code to dw_pcie_setup_rc() dw_pcie_host_init() looks up host bridge resources, ioremaps them, creates IRQ domains, and enumerates devices below the bridge. dw_pcie_setup_rc() programs the Root Complex registers. The Root Complex may lose power during suspend-to-RAM, and when we resume, we want to redo the latter but not the former. Move some Root Complex programming from dw_pcie_host_init() to dw_pcie_setup_rc() where it belongs. DesignWare-based drivers can call dw_pcie_setup_rc() in their resume paths. [Niklas Cassel : This change moves outbound ATU programming, which uses pp->mem_base, to dw_pcie_setup_rc(). Apply the dra7xx pp->mem_base update before calling dw_pcie_setup_rc().] [bhelgaas: changelog, fold in dra7xx fix from Niklas] Signed-off-by: Jisheng Zhang Signed-off-by: Bjorn Helgaas Acked-by: Pratyush Anand --- drivers/pci/host/pci-dra7xx.c | 4 +-- drivers/pci/host/pcie-designware.c | 39 +++++++++++++++--------------- 2 files changed, 21 insertions(+), 22 deletions(-) diff --git a/drivers/pci/host/pci-dra7xx.c b/drivers/pci/host/pci-dra7xx.c index 2ca3a1f30ebf..f441130407e7 100644 --- a/drivers/pci/host/pci-dra7xx.c +++ b/drivers/pci/host/pci-dra7xx.c @@ -142,13 +142,13 @@ static void dra7xx_pcie_enable_interrupts(struct pcie_port *pp) static void dra7xx_pcie_host_init(struct pcie_port *pp) { - dw_pcie_setup_rc(pp); - pp->io_base &= DRA7XX_CPU_TO_BUS_ADDR; pp->mem_base &= DRA7XX_CPU_TO_BUS_ADDR; pp->cfg0_base &= DRA7XX_CPU_TO_BUS_ADDR; pp->cfg1_base &= DRA7XX_CPU_TO_BUS_ADDR; + dw_pcie_setup_rc(pp); + dra7xx_pcie_establish_link(pp); if (IS_ENABLED(CONFIG_PCI_MSI)) dw_pcie_msi_init(pp); diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index a4cccd356304..261e4a1106df 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -434,7 +434,6 @@ int dw_pcie_host_init(struct pcie_port *pp) struct platform_device *pdev = to_platform_device(pp->dev); struct pci_bus *bus, *child; struct resource *cfg_res; - u32 val; int i, ret; LIST_HEAD(res); struct resource_entry *win; @@ -544,25 +543,6 @@ int dw_pcie_host_init(struct pcie_port *pp) if (pp->ops->host_init) pp->ops->host_init(pp); - /* - * If the platform provides ->rd_other_conf, it means the platform - * uses its own address translation component rather than ATU, so - * we should not program the ATU here. - */ - if (!pp->ops->rd_other_conf) - dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1, - PCIE_ATU_TYPE_MEM, pp->mem_base, - pp->mem_bus_addr, pp->mem_size); - - dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); - - /* program correct class for RC */ - dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); - - dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val); - val |= PORT_LOGIC_SPEED_CHANGE; - dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); - pp->root_bus_nr = pp->busn->start; if (IS_ENABLED(CONFIG_PCI_MSI)) { bus = pci_scan_root_bus_msi(pp->dev, pp->root_bus_nr, @@ -800,6 +780,25 @@ void dw_pcie_setup_rc(struct pcie_port *pp) val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR; dw_pcie_writel_rc(pp, val, PCI_COMMAND); + + /* + * If the platform provides ->rd_other_conf, it means the platform + * uses its own address translation component rather than ATU, so + * we should not program the ATU here. + */ + if (!pp->ops->rd_other_conf) + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1, + PCIE_ATU_TYPE_MEM, pp->mem_base, + pp->mem_bus_addr, pp->mem_size); + + dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); + + /* program correct class for RC */ + dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); + + dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val); + val |= PORT_LOGIC_SPEED_CHANGE; + dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); } MODULE_AUTHOR("Jingoo Han "); -- 2.20.1