From 7e547adcea7b9d927009717e1f3303879d5f2687 Mon Sep 17 00:00:00 2001 From: Stefan Huehner Date: Sat, 21 Feb 2015 22:23:56 +0100 Subject: [PATCH] drm/nouveau/device/gm100: Basic GM206 bring up (as copy of GM204) Enough to get VGA monitor on DVI-I output have output. HDMI output not yet working Signed-off-by: Ben Skeggs --- .../drm/nouveau/nvkm/engine/device/gm100.c | 43 +++++++++++++++++++ 1 file changed, 43 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c index 539561ed3281..108d048da764 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/gm100.c @@ -140,6 +140,49 @@ gm100_identify(struct nvkm_device *device) device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass; device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass; device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass; +#endif + break; + case 0x126: + device->cname = "GM206"; + device->oclass[NVDEV_SUBDEV_VBIOS ] = &nvkm_bios_oclass; + device->oclass[NVDEV_SUBDEV_GPIO ] = gk104_gpio_oclass; + device->oclass[NVDEV_SUBDEV_I2C ] = gm204_i2c_oclass; + device->oclass[NVDEV_SUBDEV_FUSE ] = &gm107_fuse_oclass; +#if 0 + /* looks to be some non-trivial changes */ + device->oclass[NVDEV_SUBDEV_CLK ] = &gk104_clk_oclass; + /* priv ring says no to 0x10eb14 writes */ + device->oclass[NVDEV_SUBDEV_THERM ] = &gm107_therm_oclass; +#endif + device->oclass[NVDEV_SUBDEV_MXM ] = &nv50_mxm_oclass; + device->oclass[NVDEV_SUBDEV_DEVINIT] = gm204_devinit_oclass; + device->oclass[NVDEV_SUBDEV_MC ] = gk20a_mc_oclass; + device->oclass[NVDEV_SUBDEV_BUS ] = gf100_bus_oclass; + device->oclass[NVDEV_SUBDEV_TIMER ] = &gk20a_timer_oclass; + device->oclass[NVDEV_SUBDEV_FB ] = gm107_fb_oclass; + device->oclass[NVDEV_SUBDEV_LTC ] = gm107_ltc_oclass; + device->oclass[NVDEV_SUBDEV_IBUS ] = &gk104_ibus_oclass; + device->oclass[NVDEV_SUBDEV_INSTMEM] = nv50_instmem_oclass; + device->oclass[NVDEV_SUBDEV_MMU ] = &gf100_mmu_oclass; + device->oclass[NVDEV_SUBDEV_BAR ] = &gf100_bar_oclass; + device->oclass[NVDEV_SUBDEV_PMU ] = gk208_pmu_oclass; +#if 0 + device->oclass[NVDEV_SUBDEV_VOLT ] = &nv40_volt_oclass; +#endif + device->oclass[NVDEV_ENGINE_DMAOBJ ] = gf110_dmaeng_oclass; +#if 0 + device->oclass[NVDEV_ENGINE_FIFO ] = gk208_fifo_oclass; + device->oclass[NVDEV_ENGINE_SW ] = gf100_sw_oclass; + device->oclass[NVDEV_ENGINE_GR ] = gm107_gr_oclass; +#endif + device->oclass[NVDEV_ENGINE_DISP ] = gm204_disp_oclass; +#if 0 + device->oclass[NVDEV_ENGINE_CE0 ] = &gm204_ce0_oclass; + device->oclass[NVDEV_ENGINE_CE1 ] = &gm204_ce1_oclass; + device->oclass[NVDEV_ENGINE_CE2 ] = &gm204_ce2_oclass; + device->oclass[NVDEV_ENGINE_MSVLD ] = &gk104_msvld_oclass; + device->oclass[NVDEV_ENGINE_MSPDEC ] = &gk104_mspdec_oclass; + device->oclass[NVDEV_ENGINE_MSPPP ] = &gf100_msppp_oclass; #endif break; default: -- 2.20.1