From 7e44892c1b6bb499cb2f6d5c0f4afcc077a26074 Mon Sep 17 00:00:00 2001 From: Emil Tantilov Date: Fri, 26 Jul 2013 05:46:36 -0700 Subject: [PATCH] igb: fix vlan filtering in promisc mode when not in VT mode This patch fixes a VT mode check to make sure VLAN filters are disabled when in promisc mode and VT is not enabled. The problem with the previous check was that: E1000_MRQC_ENABLE_VMDQ is defined as 0x00000003 but when not in VT mode: mrqc |= E1000_MRQC_ENABLE_RSS_4Q (0x00000002) So the above check will trigger regardless if VT mode is being used or not. Signed-off-by: Emil Tantilov Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/ethernet/intel/igb/igb_main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 6a0c1b66ce54..c1d72c03cb59 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -3739,9 +3739,8 @@ static void igb_set_rx_mode(struct net_device *netdev) rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE); if (netdev->flags & IFF_PROMISC) { - u32 mrqc = rd32(E1000_MRQC); /* retain VLAN HW filtering if in VT mode */ - if (mrqc & E1000_MRQC_ENABLE_VMDQ) + if (adapter->vfs_allocated_count) rctl |= E1000_RCTL_VFE; rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE); vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME); -- 2.20.1