From 7d6a07d123b62bf4fa71867420c23da3ca36c995 Mon Sep 17 00:00:00 2001 From: David Daney Date: Fri, 2 Jan 2009 13:49:47 +0000 Subject: [PATCH] 8250: Serial driver changes to support future Cavium OCTEON serial patches. In order to use Cavium OCTEON specific serial i/o drivers, we first patch the 8250 driver to use replaceable I/O functions. Compatible I/O functions are added for existing iotypeS. An added benefit of this change is that it makes it easy to factor some of the existing special cases out to board/SOC specific support code. The alternative is to load up 8250.c with a bunch of OCTEON specific iotype code and bug work-arounds. Signed-off-by: David Daney Signed-off-by: Tomaso Paoletti Signed-off-by: Andrew Morton Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/serial/8250.c | 194 +++++++++++++++++++++++++----------- include/linux/serial_8250.h | 2 + include/linux/serial_core.h | 2 + 3 files changed, 140 insertions(+), 58 deletions(-) diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 8e28750a4058..849af9d21feb 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -303,16 +303,16 @@ static const u8 au_io_out_map[] = { }; /* sane hardware needs no mapping */ -static inline int map_8250_in_reg(struct uart_8250_port *up, int offset) +static inline int map_8250_in_reg(struct uart_port *p, int offset) { - if (up->port.iotype != UPIO_AU) + if (p->iotype != UPIO_AU) return offset; return au_io_in_map[offset]; } -static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) +static inline int map_8250_out_reg(struct uart_port *p, int offset) { - if (up->port.iotype != UPIO_AU) + if (p->iotype != UPIO_AU) return offset; return au_io_out_map[offset]; } @@ -341,16 +341,16 @@ static const u8 [UART_SCR] = 0x2c }; -static inline int map_8250_in_reg(struct uart_8250_port *up, int offset) +static inline int map_8250_in_reg(struct uart_port *p, int offset) { - if (up->port.iotype != UPIO_RM9000) + if (p->iotype != UPIO_RM9000) return offset; return regmap_in[offset]; } -static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) +static inline int map_8250_out_reg(struct uart_port *p, int offset) { - if (up->port.iotype != UPIO_RM9000) + if (p->iotype != UPIO_RM9000) return offset; return regmap_out[offset]; } @@ -363,108 +363,170 @@ static inline int map_8250_out_reg(struct uart_8250_port *up, int offset) #endif -static unsigned int serial_in(struct uart_8250_port *up, int offset) +static unsigned int hub6_serial_in(struct uart_port *p, int offset) { - unsigned int tmp; - offset = map_8250_in_reg(up, offset) << up->port.regshift; + offset = map_8250_in_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + return inb(p->iobase + 1); +} - switch (up->port.iotype) { - case UPIO_HUB6: - outb(up->port.hub6 - 1 + offset, up->port.iobase); - return inb(up->port.iobase + 1); +static void hub6_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(p->hub6 - 1 + offset, p->iobase); + outb(value, p->iobase + 1); +} - case UPIO_MEM: - case UPIO_DWAPB: - return readb(up->port.membase + offset); +static unsigned int mem_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readb(p->membase + offset); +} - case UPIO_RM9000: - case UPIO_MEM32: - return readl(up->port.membase + offset); +static void mem_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writeb(value, p->membase + offset); +} + +static void mem32_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + writel(value, p->membase + offset); +} + +static unsigned int mem32_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return readl(p->membase + offset); +} #ifdef CONFIG_SERIAL_8250_AU1X00 - case UPIO_AU: - return __raw_readl(up->port.membase + offset); +static unsigned int au_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return __raw_readl(p->membase + offset); +} + +static void au_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + __raw_writel(value, p->membase + offset); +} #endif - case UPIO_TSI: - if (offset == UART_IIR) { - tmp = readl(up->port.membase + (UART_IIR & ~3)); - return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ - } else - return readb(up->port.membase + offset); +static unsigned int tsi_serial_in(struct uart_port *p, int offset) +{ + unsigned int tmp; + offset = map_8250_in_reg(p, offset) << p->regshift; + if (offset == UART_IIR) { + tmp = readl(p->membase + (UART_IIR & ~3)); + return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */ + } else + return readb(p->membase + offset); +} - default: - return inb(up->port.iobase + offset); - } +static void tsi_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + if (!((offset == UART_IER) && (value & UART_IER_UUE))) + writeb(value, p->membase + offset); } -static void -serial_out(struct uart_8250_port *up, int offset, int value) +static void dwapb_serial_out(struct uart_port *p, int offset, int value) { - /* Save the offset before it's remapped */ int save_offset = offset; - offset = map_8250_out_reg(up, offset) << up->port.regshift; + offset = map_8250_out_reg(p, offset) << p->regshift; + /* Save the LCR value so it can be re-written when a + * Busy Detect interrupt occurs. */ + if (save_offset == UART_LCR) { + struct uart_8250_port *up = (struct uart_8250_port *)p; + up->lcr = value; + } + writeb(value, p->membase + offset); + /* Read the IER to ensure any interrupt is cleared before + * returning from ISR. */ + if (save_offset == UART_TX || save_offset == UART_IER) + value = p->serial_in(p, UART_IER); +} - switch (up->port.iotype) { +static unsigned int io_serial_in(struct uart_port *p, int offset) +{ + offset = map_8250_in_reg(p, offset) << p->regshift; + return inb(p->iobase + offset); +} + +static void io_serial_out(struct uart_port *p, int offset, int value) +{ + offset = map_8250_out_reg(p, offset) << p->regshift; + outb(value, p->iobase + offset); +} + +static void set_io_from_upio(struct uart_port *p) +{ + switch (p->iotype) { case UPIO_HUB6: - outb(up->port.hub6 - 1 + offset, up->port.iobase); - outb(value, up->port.iobase + 1); + p->serial_in = hub6_serial_in; + p->serial_out = hub6_serial_out; break; case UPIO_MEM: - writeb(value, up->port.membase + offset); + p->serial_in = mem_serial_in; + p->serial_out = mem_serial_out; break; case UPIO_RM9000: case UPIO_MEM32: - writel(value, up->port.membase + offset); + p->serial_in = mem32_serial_in; + p->serial_out = mem32_serial_out; break; #ifdef CONFIG_SERIAL_8250_AU1X00 case UPIO_AU: - __raw_writel(value, up->port.membase + offset); + p->serial_in = au_serial_in; + p->serial_out = au_serial_out; break; #endif case UPIO_TSI: - if (!((offset == UART_IER) && (value & UART_IER_UUE))) - writeb(value, up->port.membase + offset); + p->serial_in = tsi_serial_in; + p->serial_out = tsi_serial_out; break; case UPIO_DWAPB: - /* Save the LCR value so it can be re-written when a - * Busy Detect interrupt occurs. */ - if (save_offset == UART_LCR) - up->lcr = value; - writeb(value, up->port.membase + offset); - /* Read the IER to ensure any interrupt is cleared before - * returning from ISR. */ - if (save_offset == UART_TX || save_offset == UART_IER) - value = serial_in(up, UART_IER); + p->serial_in = mem_serial_in; + p->serial_out = dwapb_serial_out; break; default: - outb(value, up->port.iobase + offset); + p->serial_in = io_serial_in; + p->serial_out = io_serial_out; + break; } } static void serial_out_sync(struct uart_8250_port *up, int offset, int value) { - switch (up->port.iotype) { + struct uart_port *p = &up->port; + switch (p->iotype) { case UPIO_MEM: case UPIO_MEM32: #ifdef CONFIG_SERIAL_8250_AU1X00 case UPIO_AU: #endif case UPIO_DWAPB: - serial_out(up, offset, value); - serial_in(up, UART_LCR); /* safe, no side-effects */ + p->serial_out(p, offset, value); + p->serial_in(p, UART_LCR); /* safe, no side-effects */ break; default: - serial_out(up, offset, value); + p->serial_out(p, offset, value); } } +#define serial_in(up, offset) \ + (up->port.serial_in(&(up)->port, (offset))) +#define serial_out(up, offset, value) \ + (up->port.serial_out(&(up)->port, (offset), (value))) /* * We used to support using pause I/O for certain machines. We * haven't supported this for a while, but just in case it's badly @@ -2576,6 +2638,7 @@ static void __init serial8250_isa_init_ports(void) up->port.membase = old_serial_port[i].iomem_base; up->port.iotype = old_serial_port[i].io_type; up->port.regshift = old_serial_port[i].iomem_reg_shift; + set_io_from_upio(&up->port); if (share_irqs) up->port.flags |= UPF_SHARE_IRQ; } @@ -2769,6 +2832,13 @@ int __init early_serial_setup(struct uart_port *port) p->flags = port->flags; p->mapbase = port->mapbase; p->private_data = port->private_data; + + set_io_from_upio(p); + if (port->serial_in) + p->serial_in = port->serial_in; + if (port->serial_out) + p->serial_out = port->serial_out; + return 0; } @@ -2833,6 +2903,8 @@ static int __devinit serial8250_probe(struct platform_device *dev) port.mapbase = p->mapbase; port.hub6 = p->hub6; port.private_data = p->private_data; + port.serial_in = p->serial_in; + port.serial_out = p->serial_out; port.dev = &dev->dev; if (share_irqs) port.flags |= UPF_SHARE_IRQ; @@ -2986,6 +3058,12 @@ int serial8250_register_port(struct uart_port *port) uart->port.private_data = port->private_data; if (port->dev) uart->port.dev = port->dev; + set_io_from_upio(&uart->port); + /* Possibly override default I/O functions. */ + if (port->serial_in) + uart->port.serial_in = port->serial_in; + if (port->serial_out) + uart->port.serial_out = port->serial_out; ret = uart_add_one_port(&serial8250_reg, &uart->port); if (ret == 0) diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 3d37c94abbc8..77d83d929f2c 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -28,6 +28,8 @@ struct plat_serial8250_port { unsigned char iotype; /* UPIO_* */ unsigned char hub6; upf_t flags; /* UPF_* flags */ + unsigned int (*serial_in)(struct uart_port *, int); + void (*serial_out)(struct uart_port *, int, int); }; /* diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 2395969faa04..60061f44f3d8 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -248,6 +248,8 @@ struct uart_port { spinlock_t lock; /* port lock */ unsigned long iobase; /* in/out[bwl] */ unsigned char __iomem *membase; /* read/write[bwl] */ + unsigned int (*serial_in)(struct uart_port *, int); + void (*serial_out)(struct uart_port *, int, int); unsigned int irq; /* irq number */ unsigned int uartclk; /* base uart clock */ unsigned int fifosize; /* tx fifo size */ -- 2.20.1