From 7ccbc60cd9c293304829662b043f4356f554fc3a Mon Sep 17 00:00:00 2001 From: Tomasz Figa Date: Wed, 22 May 2013 16:03:17 +0200 Subject: [PATCH] pinctrl: exynos: Handle suspend/resume of GPIO EINT registers Some GPIO EINT control registers needs to be preserved across suspend/resume cycle. This patch extends the driver to take care of this. Signed-off-by: Tomasz Figa Signed-off-by: Kyungmin Park Signed-off-by: Linus Walleij --- drivers/pinctrl/pinctrl-exynos.c | 116 ++++++++++++++++++++++++++++++- drivers/pinctrl/pinctrl-exynos.h | 1 + 2 files changed, 114 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c index 4f868e59227e..2d76f66a2e0b 100644 --- a/drivers/pinctrl/pinctrl-exynos.c +++ b/drivers/pinctrl/pinctrl-exynos.c @@ -196,6 +196,12 @@ static irqreturn_t exynos_eint_gpio_irq(int irq, void *data) return IRQ_HANDLED; } +struct exynos_eint_gpio_save { + u32 eint_con; + u32 eint_fltcon0; + u32 eint_fltcon1; +}; + /* * exynos_eint_gpio_init() - setup handling of external gpio interrupts. * @d: driver data of samsung pinctrl driver. @@ -204,8 +210,8 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) { struct samsung_pin_bank *bank; struct device *dev = d->dev; - unsigned int ret; - unsigned int i; + int ret; + int i; if (!d->irq) { dev_err(dev, "irq number not available\n"); @@ -227,11 +233,29 @@ static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d) bank->nr_pins, &exynos_gpio_irqd_ops, bank); if (!bank->irq_domain) { dev_err(dev, "gpio irq domain add failed\n"); - return -ENXIO; + ret = -ENXIO; + goto err_domains; + } + + bank->soc_priv = devm_kzalloc(d->dev, + sizeof(struct exynos_eint_gpio_save), GFP_KERNEL); + if (!bank->soc_priv) { + irq_domain_remove(bank->irq_domain); + ret = -ENOMEM; + goto err_domains; } } return 0; + +err_domains: + for (--i, --bank; i >= 0; --i, --bank) { + if (bank->eint_type != EINT_TYPE_GPIO) + continue; + irq_domain_remove(bank->irq_domain); + } + + return ret; } static void exynos_wkup_irq_unmask(struct irq_data *irqd) @@ -528,6 +552,72 @@ static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d) return 0; } +static void exynos_pinctrl_suspend_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + save->eint_con = readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + save->eint_fltcon0 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + save->eint_fltcon1 = readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); + + pr_debug("%s: save con %#010x\n", bank->name, save->eint_con); + pr_debug("%s: save fltcon0 %#010x\n", bank->name, save->eint_fltcon0); + pr_debug("%s: save fltcon1 %#010x\n", bank->name, save->eint_fltcon1); +} + +static void exynos_pinctrl_suspend(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_suspend_bank(drvdata, bank); +} + +static void exynos_pinctrl_resume_bank( + struct samsung_pinctrl_drv_data *drvdata, + struct samsung_pin_bank *bank) +{ + struct exynos_eint_gpio_save *save = bank->soc_priv; + void __iomem *regs = drvdata->virt_base; + + pr_debug("%s: con %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset), save->eint_con); + pr_debug("%s: fltcon0 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset), save->eint_fltcon0); + pr_debug("%s: fltcon1 %#010x => %#010x\n", bank->name, + readl(regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4), save->eint_fltcon1); + + writel(save->eint_con, regs + EXYNOS_GPIO_ECON_OFFSET + + bank->eint_offset); + writel(save->eint_fltcon0, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset); + writel(save->eint_fltcon1, regs + EXYNOS_GPIO_EFLTCON_OFFSET + + 2 * bank->eint_offset + 4); +} + +static void exynos_pinctrl_resume(struct samsung_pinctrl_drv_data *drvdata) +{ + struct samsung_pin_ctrl *ctrl = drvdata->ctrl; + struct samsung_pin_bank *bank = ctrl->pin_banks; + int i; + + for (i = 0; i < ctrl->nr_banks; ++i, ++bank) + if (bank->eint_type == EINT_TYPE_GPIO) + exynos_pinctrl_resume_bank(drvdata, bank); +} + /* pin banks of exynos4210 pin-controller 0 */ static struct samsung_pin_bank exynos4210_pin_banks0[] = { EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00), @@ -591,6 +681,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -605,6 +697,8 @@ struct samsung_pin_ctrl exynos4210_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4210-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -686,6 +780,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -700,6 +796,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -710,6 +808,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -720,6 +820,8 @@ struct samsung_pin_ctrl exynos4x12_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos4x12-gpio-ctrl3", }, }; @@ -798,6 +900,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, .eint_wkup_init = exynos_eint_wkup_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl0", }, { /* pin-controller instance 1 data */ @@ -808,6 +912,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl1", }, { /* pin-controller instance 2 data */ @@ -818,6 +924,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl2", }, { /* pin-controller instance 3 data */ @@ -828,6 +936,8 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = { .geint_pend = EXYNOS_GPIO_EPEND_OFFSET, .svc = EXYNOS_SVC_OFFSET, .eint_gpio_init = exynos_eint_gpio_init, + .suspend = exynos_pinctrl_suspend, + .resume = exynos_pinctrl_resume, .label = "exynos5250-gpio-ctrl3", }, }; diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h index 9b1f77a5bf0f..3c91c357792f 100644 --- a/drivers/pinctrl/pinctrl-exynos.h +++ b/drivers/pinctrl/pinctrl-exynos.h @@ -19,6 +19,7 @@ /* External GPIO and wakeup interrupt related definitions */ #define EXYNOS_GPIO_ECON_OFFSET 0x700 +#define EXYNOS_GPIO_EFLTCON_OFFSET 0x800 #define EXYNOS_GPIO_EMASK_OFFSET 0x900 #define EXYNOS_GPIO_EPEND_OFFSET 0xA00 #define EXYNOS_WKUP_ECON_OFFSET 0xE00 -- 2.20.1