From 7c3fe64d133fbe4132d9966cd2f79a7193f13139 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Tue, 13 Nov 2012 16:43:21 +0100 Subject: [PATCH] i2c: at91: fix SMBus quick command The driver claims to support SMBus quick command but it was not the case. This patch fixes this issue. Without it, i2cdetect finds imaginary devices. And with some IP versions, trying to send 0 byte can cause issue when writing data to an EEPROM. Signed-off-by: Ludovic Desroches Acked-by: Jean-Christophe PLAGNIOL-VILLARD [wsa: improved the commit message] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-at91.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index aa59a254be2c..c02bf208084f 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -39,6 +39,7 @@ #define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */ #define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */ #define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */ +#define AT91_TWI_QUICK 0x0040 /* SMBus quick command */ #define AT91_TWI_SWRST 0x0080 /* Software Reset */ #define AT91_TWI_MMR 0x0004 /* Master Mode Register */ @@ -212,7 +213,11 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) INIT_COMPLETION(dev->cmd_complete); dev->transfer_status = 0; - if (dev->msg->flags & I2C_M_RD) { + + if (!dev->buf_len) { + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK); + at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP); + } else if (dev->msg->flags & I2C_M_RD) { unsigned start_flags = AT91_TWI_START; if (at91_twi_read(dev, AT91_TWI_SR) & AT91_TWI_RXRDY) { -- 2.20.1