From 78f622377f7d31d988db350a43c5689dd5f31876 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Thu, 13 May 2010 14:38:21 -0500 Subject: [PATCH] powerpc/fsl-booke: Move loadcam_entry back to asm code to fix SMP ftrace When we build with ftrace enabled its possible that loadcam_entry would have used the stack pointer (even though the code doesn't need it). We call loadcam_entry in __secondary_start before the stack is setup. To ensure that loadcam_entry doesn't use the stack pointer the easiest solution is to just have it in asm code. Signed-off-by: Kumar Gala --- arch/powerpc/kernel/asm-offsets.c | 8 ++++++++ arch/powerpc/mm/fsl_booke_mmu.c | 25 +++---------------------- arch/powerpc/mm/mmu_decl.h | 10 +++++++++- arch/powerpc/mm/tlb_nohash_low.S | 28 ++++++++++++++++++++++++++++ 4 files changed, 48 insertions(+), 23 deletions(-) diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 957ceb7059c5..0271b58ec31e 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -448,6 +448,14 @@ int main(void) DEFINE(PGD_T_LOG2, PGD_T_LOG2); DEFINE(PTE_T_LOG2, PTE_T_LOG2); #endif +#ifdef CONFIG_FSL_BOOKE + DEFINE(TLBCAM_SIZE, sizeof(struct tlbcam)); + DEFINE(TLBCAM_MAS0, offsetof(struct tlbcam, MAS0)); + DEFINE(TLBCAM_MAS1, offsetof(struct tlbcam, MAS1)); + DEFINE(TLBCAM_MAS2, offsetof(struct tlbcam, MAS2)); + DEFINE(TLBCAM_MAS3, offsetof(struct tlbcam, MAS3)); + DEFINE(TLBCAM_MAS7, offsetof(struct tlbcam, MAS7)); +#endif #ifdef CONFIG_KVM_EXIT_TIMING DEFINE(VCPU_TIMING_EXIT_TBU, offsetof(struct kvm_vcpu, diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 1ed6b52f3031..cdc7526e9c93 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -2,7 +2,7 @@ * Modifications by Kumar Gala (galak@kernel.crashing.org) to support * E500 Book E processors. * - * Copyright 2004 Freescale Semiconductor, Inc + * Copyright 2004,2010 Freescale Semiconductor, Inc. * * This file contains the routines for initializing the MMU * on the 4xx series of chips. @@ -56,19 +56,13 @@ unsigned int tlbcam_index; -#define NUM_TLBCAMS (64) #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) #error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" #endif -struct tlbcam { - u32 MAS0; - u32 MAS1; - unsigned long MAS2; - u32 MAS3; - u32 MAS7; -} TLBCAM[NUM_TLBCAMS]; +#define NUM_TLBCAMS (64) +struct tlbcam TLBCAM[NUM_TLBCAMS]; struct tlbcamrange { unsigned long start; @@ -109,19 +103,6 @@ unsigned long p_mapped_by_tlbcam(phys_addr_t pa) return 0; } -void loadcam_entry(int idx) -{ - mtspr(SPRN_MAS0, TLBCAM[idx].MAS0); - mtspr(SPRN_MAS1, TLBCAM[idx].MAS1); - mtspr(SPRN_MAS2, TLBCAM[idx].MAS2); - mtspr(SPRN_MAS3, TLBCAM[idx].MAS3); - - if (mmu_has_feature(MMU_FTR_BIG_PHYS)) - mtspr(SPRN_MAS7, TLBCAM[idx].MAS7); - - asm volatile("isync;tlbwe;isync" : : : "memory"); -} - /* * Set up one of the I/D BAT (block address translation) register pairs. * The parameters are not checked; in particular size must be a power diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index eb11d5d2aa94..63b84a0d3b10 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -144,7 +144,15 @@ extern unsigned long mmu_mapin_ram(unsigned long top); extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(unsigned long top); extern void adjust_total_lowmem(void); - +extern void loadcam_entry(unsigned int index); + +struct tlbcam { + u32 MAS0; + u32 MAS1; + unsigned long MAS2; + u32 MAS3; + u32 MAS7; +}; #elif defined(CONFIG_PPC32) /* anything 32-bit except 4xx or 8xx */ extern void MMU_init_hw(void); diff --git a/arch/powerpc/mm/tlb_nohash_low.S b/arch/powerpc/mm/tlb_nohash_low.S index e925cb58afd9..cfa768203d08 100644 --- a/arch/powerpc/mm/tlb_nohash_low.S +++ b/arch/powerpc/mm/tlb_nohash_low.S @@ -365,3 +365,31 @@ _GLOBAL(set_context) #else #error Unsupported processor type ! #endif + +#if defined(CONFIG_FSL_BOOKE) +/* + * extern void loadcam_entry(unsigned int index) + * + * Load TLBCAM[index] entry in to the L2 CAM MMU + */ +_GLOBAL(loadcam_entry) + LOAD_REG_ADDR(r4, TLBCAM) + mulli r5,r3,TLBCAM_SIZE + add r3,r5,r4 + lwz r4,TLBCAM_MAS0(r3) + mtspr SPRN_MAS0,r4 + lwz r4,TLBCAM_MAS1(r3) + mtspr SPRN_MAS1,r4 + PPC_LL r4,TLBCAM_MAS2(r3) + mtspr SPRN_MAS2,r4 + lwz r4,TLBCAM_MAS3(r3) + mtspr SPRN_MAS3,r4 +BEGIN_MMU_FTR_SECTION + lwz r4,TLBCAM_MAS7(r3) + mtspr SPRN_MAS7,r4 +END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS) + isync + tlbwe + isync + blr +#endif -- 2.20.1