From 7855f675e6cbccb565c41dfeef708b8d7e6444ff Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 11 Dec 2014 18:12:42 -0800 Subject: [PATCH] net: dsa: bcm_sf2: force link for all fixed PHY devices For ports of the switch that we define as "fixed PHYs" such as MoCA, we would have our Port 7 special handling that would allow us to assert the link status indication. For other ports, such as e.g: RGMII_1 connected to a cable modem, we would rely on whatever the bootloader has left configured, which is a bad assumption to make, we really need to force the link status indication here. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/bcm_sf2.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c index 4f4c2a7888e5..feb29c4526f7 100644 --- a/drivers/net/dsa/bcm_sf2.c +++ b/drivers/net/dsa/bcm_sf2.c @@ -684,10 +684,9 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, struct fixed_phy_status *status) { struct bcm_sf2_priv *priv = ds_to_priv(ds); - u32 link, duplex, pause, speed; + u32 duplex, pause, speed; u32 reg; - link = core_readl(priv, CORE_LNKSTS); duplex = core_readl(priv, CORE_DUPSTS); pause = core_readl(priv, CORE_PAUSESTS); speed = core_readl(priv, CORE_SPDSTS); @@ -701,22 +700,26 @@ static void bcm_sf2_sw_fixed_link_update(struct dsa_switch *ds, int port, * which means that we need to force the link at the port override * level to get the data to flow. We do use what the interrupt handler * did determine before. + * + * For the other ports, we just force the link status, since this is + * a fixed PHY device. */ if (port == 7) { status->link = priv->port_sts[port].link; - reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(7)); - reg |= SW_OVERRIDE; - if (status->link) - reg |= LINK_STS; - else - reg &= ~LINK_STS; - core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(7)); status->duplex = 1; } else { - status->link = !!(link & (1 << port)); + status->link = 1; status->duplex = !!(duplex & (1 << port)); } + reg = core_readl(priv, CORE_STS_OVERRIDE_GMIIP_PORT(port)); + reg |= SW_OVERRIDE; + if (status->link) + reg |= LINK_STS; + else + reg &= ~LINK_STS; + core_writel(priv, reg, CORE_STS_OVERRIDE_GMIIP_PORT(port)); + switch (speed) { case SPDSTS_10: status->speed = SPEED_10; -- 2.20.1